Spectroscopic Studies of Model Photo-Receptors: Validation of a Nanosecond Time-Resolved Micro-Spectrophotometer Design Using Photoactive Yellow Protein and α-Phycoerythrocyanin

Time-resolved spectroscopic experiments have been performed with protein in solution and in crystalline form using a newly designed microspectrophotometer. The time-resolution of these experiments can be as good as two nanoseconds (ns), which is the minimal response time of the image intensifier used. With the current setup, the effective time-resolution is about seven ns, determined mainly by the pulse duration of the nanosecond laser. The amount of protein required is small, on the order of 100 nanograms. Bleaching, which is an undesirable effect common to photoreceptor proteins, is minimized by using a millisecond shutter to avoid extensive exposure to the probing light. We investigate two model photoreceptors, photoactive yellow protein (PYP), and α-phycoerythrocyanin (α-PEC), on different time scales and at different temperatures. Relaxation times obtained from kinetic time-series of difference absorption spectra collected from PYP are consistent with previous results. The comparison with these results validates the capability of this spectrophotometer to deliver high quality time-resolved absorption spectra.     

A decomposition method for multi-product kanban systems with setup times and lost sales

We consider kanban controlled production systems with three or more different products processed on a single manufacturing facility. Customers for a product arrive according to a Poisson process. If a customer's demand cannot be met from stock, the customer leaves and satisfies his demand elsewhere (lost sales). Between the production of different products setup changes must be performed that take a significant time. Setup times and processing times are product-specific and follow exponential distributions. A production run continues until the target inventory level given by the number of kanbans for the product has been reached (exhaustive processing). Then the manufacturing facility is set up for the next product according to a fixed setup cycle. The exact model is mathematically intractable even for smaller systems. Therefore, we propose a decomposition-based approximation method for estimating steady-state performance measures     

Characteristics of carcass composition,fat metabolism and meat quality of genetically different pigs

The aim of the study was to quantify the differences in meat and fat quality and lipid metabolism of pigs with either high or medium capacity for lipid accretion. A total of 58 castrated males of the breeds German Saddle Back (SB) and German Landrace (DL) were included in the experiment. Animals were housed individually and fed twice daily semi ad libitum. Saddle Back pigs indicated a lower lean meat content (41.4% vs 52.6%) and a higher fat percentage (40.9% vs 28.2%) in comparison to DL as a result of high lipid accumulation. The larger fat content of SB was related to an increased intramuscular fat concentration of longissimus muscle. A significant correlation between intramuscular fat content and fatty acid composition was estimated in both breeds. The relative concentration of saturated fatty acids was significantly increased in SB pigs. The percentage of polyunsaturated fatty acids (8.3%) in SB muscle fat was significantly lower than in DL muscle fat (10.7%). The de novo biosynthesis of fatty acids resulted in mostly saturated fatty acids and oleic acid. The higher activities of lipogenetic enzymes in backfat of SB proved a higher lipogenetic capacity. There were no significant differences in meat quality traits of longissimus muscle between the two breeds.     

Static and fatigue failure properties of thoracic and lumbar vertebral bodies and their relation to regional density

This study investigated (1) whether a characterization of the macroscopic architecture within the vertebral centrum would improve predictions of vertebral strength, (2) if regions in the centrum where least bone loss with age occurs are more predictive of vertebral strength, and (3) whether different patterns of the macroscopic architecture are predictive of static as compared to fatigue strength. To characterize the vertebral macroscopic architecture, a regional bone mineral density (rBMD) technique was used that estimated the cancellous density distribution (in 18 specific regions of the vertebral centrum) for vertebrae T7-L4, from spines of 20 female cadavers. Static and fatigue failure properties of whole vertebrae were obtained, and predictive models of static and fatigue failure properties of whole vertebrae were examined. We found that (1) vertebral failure properties were better predicted by combinations of vertebral regional cancellous density (multiple linear regressions) rather than by any individual region of cancellous density alone (simple linear regressions); (2) models using regions of density that demonstrated minimum decline with age [from the data of Flynn and Cody (Calcif. Tissue Int. 53, S170-S175 (1993))] resulted in better correlations with ex vivo vertebral static failure properties than models using density regions that showed maximum decline with age, and (3) static and fatigue characteristics required different density regions to reach significance. (A comparison of models predictive of static and fatigue failure properties revealed that anterior density regions were most often included in predictive models of the static properties while posterior regions were more predictive of the fatigue properties).(ABSTRACT TRUNCATED AT 250 WORDS)     

Lattice Monte Carlo simulations as link between ab-initio calculations and macroscopic behavior of dopants and defects in silicon

In this work, we show that lattice Monte Carlo simulations can be used to span the time and distance scales between underlying atomistic processes and macroscopic diffusion behavior. We use ab- initio calculations of binding energies versus configuration to calculate hopping rates of vacancies for use in lattice Monte Carlo (LMC) simulations of diffusion and aggregation in silicon. The LMC simulations consider the biased nature of vacancy hop frequencies in the neighborhood of dopants, with interactions up to sixth-nearest- neighbor distances included. We use these simulations to investigate the expected macroscopic diffusion behavior, as well as the process by which dopant/defect aggregation occurs. Specific phenomena investigated include collective behavior leading to greatly enhanced diffusivity at high doping levels, the time dependence of effective diffusivity due to the formation of dopant/vacancy clusters, and dopant fluxes in the presence of a vacancy gradient.     

Printed microinductors on flexible substrates for power applications

A low-profile microinductor was fabricated on a copper-clad polyimide substrate where the current carrying coils were patterned from the existing metallization layer and the magnetic core was printed using a magnetic ceramic-polymer composite material. Highly loaded ferrite-polymer composite materials were formulated, yielding adherent films with 4/spl pi/M/sub s//spl ap/3900 G at +5000 Oe applied DC field. These composite magnetic films combine many of the superior properties of high temperature ceramic magnetic materials with the inherent processibility of polymer thick films. Processing temperatures for the printed films were between 100/spl deg/C and 130/spl deg/C, facilitating integration with a wide range of substrates and components. The quality factor of the microinductor was found to peak at Q=18.5 near 10 MHz, within the optimal frequency range for power applications. A flat, nearly frequency independent inductance of 1.33 /spl mu/H was measured throughout this frequency range for a 5 mm/spl times/5 mm component, with a DC resistance of 2.6 /spl Omega/ and a resonant frequency of 124 MHz. The combination of printed ceramic composites with organic/polymer substrates enables new methods for embedding passive components and ultimately the integration of high Q inductors with standard integrated circuits for low profile power electronics.     

OR-Modelle zur Planung flexibler Fertigungssysteme Ein Überblick

Zusammenfassung In diesem Beitrag wird ein Überblic über die Probleme vermittelt, die sich bei der Konfiguration und dem Betrieb eines flexiblen Fertigungssystems stellen. Die zur Behandlung der wichtigsten Problemtypen verfügbaren Modellierungsansätze werden systematisch beschrieben und auf ihren möglichen Einsatz zur Entscheidungsunterstützung für die betriebliche Praxis hin untersucht.     

Allergic fungal sinusitis in the southeastern USA: involvement of a new agent Epicoccum nigrum Ehrenb. ex Schlecht. 1824

The purpose of this study is to find the correlation between middle latency auditory evoked potentials (MLAEP) and sound activated single photon emission computed tomography (SPECT) studies. This study was performed on six normal right-handed volunteers with a mean age of 35.2 +/- 7.6 years, using the split-dose technique. First, a SPECT study was performed on subjects in blinded, awake and silent states. After bilateral ears were stimulated with a click sound, MLAEP and a second SPECT study were performed. Subtraction of the first SPECT from the second SPECT revealed a statistically significant increase of cerebral blood flow (CBF) in the bilateral superior temporal region. Bilateral Na amplitudes of MLAEP had a statistically significant and good correlation with the percentages of CBF changes in the bilateral superior temporal region. The superior temporal cerebral blood flow activation can be expressed by electrophysiological activation. Moreover, correlation during the left Na components and left frontal and occipital lobe are discussed.