Silicon-doped hydroxyapatite prepared by a thermal technique for hard tissue engineering applications

Hydroxyapatite (HA, Ca₅(PO₄)₃OH) has been extensively used for bone implantation due to its similarity to the mineral component of bone, which makes it strongly osteoconductive. However, HA has low resorbability, and it is difficult to replace by a newly regenerated bone. Si doping can enhance the resorbability of HA by modifying its crystal structure. Here, we developed a simple thermal technique for preparing Si-doped HA from silica (SiO₂) and HA precursors, both of which are inexpensive and commercially available. This method included the physical binding of SiO₂ and HA particles, followed by pressing and sintering the mixture at an elevated temperature, which enhanced the atomic diffusion of Si into HA unit cells. We also evaluated the simulated body fluid (SBF) activity of the Si-doped HA prepared by this technique and showed that it significantly had higher resorbability and mineralizing potential compared to the pure HA. Our experimental design including, the individual precipitation and resorption assays enabled us to explain the mechanism behind the improved activity of Si-doped HA in SBF. This was attributed to the formation of new phases, such as β-tricalcium phosphate (β-TCP) and calcium silicate (Ca₂SiO₄) with higher solubility than HA on the SiO₂-contating HA during the sintering stage. This can provide some guidelines for designing new calcium phosphate-based materials for hard tissue engineering applications.     

Physical and Morphological Properties of Combined Treated Wood Polymer Composites by Maleic Anhydride and Methyl Methacrylate

Wood polymer composites were prepared by consecutive impregnation with maleic anhydride (MAN) and methyl methacrylate (MMA). Samples impregnated with MAN alone, were heated at 120°C and 150°C for 4 and 8 h. Based on the Fourier transform infrared (FT-IR) analysis and soaking-drying test results, treatment with MAN at 150°C for 4 h resulted in formation of stable crosslinks. In the second stage, MMA was used for in situ polymerization within MAN-treated wood. Field emission scanning electron microscopy observation and FT-IR analysis indicated that MMA copolymerized with MAN, and the resultant polymer filled up the lumen and is also grafted on to the cell wall. Improvement of water repellency and dimensional stability were observed in the treated samples, particularly in combined treated samples. The MAN/MMA treatment improved interaction between polymer and wood.     

Comparison of pristine and polyaniline‐grafted MWCNTs as conductive sensor elements for phase change materials: Thermal conductivity trend analysis

Phase change materials (PCMs) function based on latent heat stored on or released from a substance over a slim temperature range. Multiwalled carbon nanotubes (MWCNTs) and polyaniline are important elements in sensor devices. In this work, pristine and polyaniline‐grafted MWCNTs (PANI‐g‐MWCNTs) were applied as conductive carbon‐based fillers to make PCMs based on paraffin. The attachment of PANI to the surface of MWCNTs was proved by Fourier transform Infrared analysis. Dispersion of MWCNTs in paraffin was studied by wide‐angle X‐ray scattering. Heating and solidification of PCM nanocomposites were investigated by differential scanning calorimetry, while variation in nanostructure of PCMs during heating/solidification process was evaluated by rheological measurements. It was found that after 30 min of sonication, the samples filled with 1 wt % MWCNTs have melting and solidification temperatures of 29 and 42 °C, respectively. It was also found that PANI attachment to MWCNTs significantly changes thermal conductivity behavior of PCM nanocomposites. The developed MWCNTs‐based sensor elements responded sharply at low MWCNTs content, and experienced an almost steady trend in conductivity at higher contents, while PANI‐g‐MWCNTs sensor followed an inverse trend. This contradictory behavior brought insight for understanding the response of PCMs against thermal fluctuations. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45389.     

Enhanced shape memory effect of poly(L-lactide-co-ε-caprolactone) biodegradable copolymer reinforced with functionalized MWCNTs

Data from comprehensive thermomechanical tests of poly(L-lactide-co-ε-caprolactone) biodegradable shape memory polymer (SMP) reinforced with pristine and functionalized multiwalled carbon nanotubes (MWCNTs) are reported. The SMP specimens tested up to 500% strain and between 25 °C and 70 °C temperatures. The incorporation of functionalized MWCNTs leads to the best overall reinforcing effect in tensile modulus, yield stress, tensile strength and elongation at failure. Thermo mechanical experiments resulted that the functionalized MWCNTs increased the glass transition range of composites and changed the melting point of composites slightly. The crystallinity of composites was increased with increment of MWCNTs in composites. The shape fixity and shape recovery of composites increased slightly, while the recovery stress increased 46%. It is found that the functionalized MWCNTs prepare an effective physical cross linking and switching segments in polymer composites.     

Visible Light-Induced Degradation of Methylene Blue in the Presence of Photocatalytic ZnS and CdS Nanoparticles

ZnS and CdS nanoparticles were prepared by a simple microwave irradiation method under mild conditions. The obtained nanoparticles were characterized by XRD, TEM and EDX. The results indicated that high purity of nanosized ZnS and CdS was successfully obtained with cubic and hexagonal crystalline structures, respectively. The band gap energies of ZnS and CdS nanoparticles were estimated using UV-visible absorption spectra to be about 4.22 and 2.64 eV, respectively. Photocatalytic degradation of methylene blue was carried out using physical mixtures of ZnS and CdS nanoparticles under a 500-W halogen lamp of visible light irradiation. The residual concentration of methylene blue solution was monitored using UV-visible absorption spectrometry. From the study of the variation in composition of ZnS:CdS, a composition of 1:4 (by weight) was found to be very efficient for degradation of methylene blue. In this case the degradation efficiency of the photocatalyst nanoparticles after 6 h irradiation time was about 73% with a reaction rate of 3.61 × 10⁻³ min⁻¹. Higher degradation efficiency and reaction rate were achieved by increasing the amount of photocatalyst and initial pH of the solution.     

Enhanced toughness for polyamide 6 with a core-shell structured polyacrylic modifier

Polyamide 6 (PA 6) is an important thermoplastic with excellent strength, stiffness, and good chemical resistance. The notch sensitivity and low notch impact toughness of PA 6, however, limit its application. A core-shell structured polyacrylic modifier, poly(n-butyl acrylate)/poly(methyl methacrylate-co-methacrylic acid) modifier (PBM-co-MAA), was used to toughen PA 6. To study the effect of PBM-co-MAA particles on the toughness of PA 6, various contents of poly(BA) in PBM-co-MAA latexes of 300 nm were synthesized by seed emulsion polymerization. The results showed that polymerization had an instantaneous conversion higher than 95 wt% and an overall conversion higher than 97 wt%. The PBM-co-MAA particles had a clear core–shell structure confirmed by transmission electron microscope (TEM). The mechanical properties of PA 6/PBM-co-MAA blends showed that the notch impact strength of PA 6/PBM-co-MAA blends with 85 wt% poly(BA) and 0.5 wt% MAA in PBM-co-MAA was nearly six times greater than that of pure PA 6, being consistent with the scanning electron microscope (SEM) observations on the fractured surfaces. The notch impact strengths of PA 6/PBM-co-MAA blends were also better than that of PA 6/PBM blend, which did not contain MAA functional group in the modifier. Dynamic mechanical analysis (DMA) results showed improved compatibility between PA 6 matrix and core-shell toughening modifier, which should contain a functional group in the shell layer and a suitable core rubbery content to toughen PA 6 effectively.     

Polyhydroxybutyrate/chitosan/bioglass nanocomposite as a novel electrospun scaffold: fabrication and characterization

Scaffolds and their features play a central role in tissue engineering; so this study is based on the production of a series of electrospun PHB/Chitosan/nBG nanocomposite scaffolds with 9 wt% polyhydroxybutyrate, 10, 15 and 20 wt% chitosan and 7.5, 10 and 15 wt% nanobioglass (nBG). Electrospinning process was performed with optimal conditions of spinning machine including voltage of 16 kV, syringe-collector spacing of 16 cm, and output rate of 1 µl per hour. The developed phases and the formation of chemical bonds between ceramic and polymer bands were studied through XRD and FTIR analyses. The FE-SEM and TEM analyses showed uniform morphology of nanofibers and dispersion of bioglass nanoparticles in the fiber structure. The presence of 10 wt% bioglass nanoparticles and 15 wt% chitosan increased the tensile strength of fibers to 3.42 MPa, which was about four times greater than strength of control sample (pure PHB). The developed fibers were kept 28 days in SBF solution and 60 days in PBS solution to assess their bioactivity and biodegradability. The results showed that the presence of bioglass nanoparticles leads to a dramatic increase in absorption of calcium and phosphorus ions and weight loss of scaffold. The developed scaffold can be used for bone and teeth tissue engineering applications.