Purification and some properties of cholesterol oxidase stable in detergents from gamma-proteobacterium Y-134

Cholesterol oxidase (CHO) with high stability in detergents was found from an isolated strain, Y-134, belonging to the gamma-subclass of Proteobacteria. CHO production reached its maximum by incubation at 30 degrees C for 12 d. It was purified from cell-free extract prepared by mixing the cells with 0.4% Triton X-100. The absorption spectrum of the purified enzyme exhibited maxima at 274 and 410 nm, and a shoulder at 330 nm. The molecular mass was 115 kDa with two identical subunits of 58 kDa. The enzyme oxidized cholest-5-en-3beta-ol (cholesterol) and 5alpha-cholestan-3beta-ol (dihydrocholesterol) at a high reaction rate, and the K(m) value for cholesterol was 65 microM. The stability of the enzyme was higher than other CHOs in nonionic detergents with high values of hydrophilelipophile balance (HLB) such as Triton X-450 and sodium cholate. NH2-terminal sequence analysis showed a high similarity to CHO from Burkholderia cepacia, but not to CHOs from Streptomyces or Brevibacterium.     

Expression of a gene encoding chitinase (pCA 8 ORF) from Aeromonas sp. no. 10S-24 in Escherichia coli and enzyme characterization

A gene encoding chitinase from Aeromonas sp. no. 10S-24 was expressed using pTrc99A in Escherichia coli JM 105 which yielded a 5-fold higher activity than when pUC19 was used. Three different truncated enzymes (SA-1, SA-2 and SA-3) were obtained after purification. Their isoelectric points were 7.0, 6.9, and 6.7, respectively. The enzymes showed two optimum pHs, 4.0 and 7.0, when incubated with ethylene glycol chitin as the substrate, and were stable over a wide pH range (3.0-9.0). The optimum temperature was 60 degrees C and the enzymes were stable up to 50 degrees C. The chitinases exhibited wide substrate specificities for chitin-related compounds.     

Estimation of daily intake of phenols in hospital meal samples

Daily intakes of 12 phenols which are possible endocrine disruptors were estimated in hospital meals from 2000 to 2001. 4-Nonylphenol (4-NP (mix)) and bisphenol A (BPA) were detected at levels of 5.0 to 19.4 ng/g and 0.2 to 1.1 ng/g, respectively. 4-tert-Butylphenol, 4-n-pentylphenol, 4 -tert-pentylphenol, 4-n-hexylphenol, 4-n-heptylphenol and 4-tert-octylphenol were detected at levels of 0.1 to 2.4 microg/g. The daily intakes of 4-NP (mix) and BPA were 5.8 microg/day and 0.42 microg/day, respectively. The daily intakes of other phenols were less than 1 microg/day.     

Nucleotide sequences of alcohol acetyltransferase genes from lager brewing yeast,Saccharomyces carlsbergensis

The nucleotide sequences of alcohol acetyltransferase genes isolated from lager brewing yeast, Saccharomyces carlsbergensis have been determined. S. carlsbergensis has one ATF1 gene and another homologous gene, the Lg-ATF1 gene. There was a high degree of homology between the amino acid sequences deduced for the ATF1 protein and the Lg-ATF1 protein (75·7%), but the N-terminal region has a relatively low degree of homology. Southern analysis and contour-clamped homogeneous electric field analysis of Saccharomyces strains suggest that the ATF1 gene is located on chromosome XV in S. cerevisiae and that the Lg-ATF1 gene might originate from the ‘non-S. cerevisiae’ genome of S. carlsbergensis, which is similar to that of S. bayanus and S. pastorianus. The nucleotide sequence data reported in this paper will appear in the DDBJ, EMBL and GenBank data banks with the Accession Numbers D63449 (ATF1) and D63450 (Lg-ATF1).     

Catalytic Performance of Aged Rh/CeO2–ZrO2 for NO–C3H6–O2 Reaction Under a Stoichiometric Condition

The activity of Rh/CeO₂ for NO reduction by C₃H₆ was gradually deceased by mixing with ZrO₂ until 68 mol%. Rh supported on CeO₂–ZrO₂ with higher OSC was found to show lower catalytic activity. High OSC of CeO₂–ZrO₂ would probably stabilize the surface of Rh in oxidized state, resulting in low activity and low efficiency of C₃H₆ utilization for NO reduction. In situ FT-IR spectroscopy suggested that mononitrosyl species such as Rh(NO)^δ? and Rh(NO)^δ+ are reaction intermediates in the NO–C₃H₆–O₂ reaction over Rh/CeO₂–ZrO₂ catalysts.     

Metalloendopeptidase ADAM-like Decysin 1 (ADAMDEC1) in Colonic Subepithelial PDGFRα+ Cells Is a New Marker for Inflammatory Bowel Disease

Metalloendopeptidase ADAM-Like Decysin 1 (ADAMDEC1) is an anti-inflammatory peptidase that is almost exclusively expressed in the gastrointestinal (GI) tract. We have recently found abundant and selective expression of Adamdec1 in colonic mucosal PDGFRα⁺ cells. However, the cellular origin for this gene expression is controversial as it is also known to be expressed in intestinal macrophages. We found that Adamdec1 mRNAs were selectively expressed in colonic mucosal subepithelial PDGFRα⁺ cells. ADAMDEC1 protein was mainly released from PDGFRα⁺ cells and accumulated in the mucosal layer lamina propria space near the epithelial basement membrane. PDGFRα⁺ cells significantly overexpressed Adamdec1 mRNAs and protein in DSS-induced colitis mice. Adamdec1 was predominantly expressed in CD45⁻ PDGFRα⁺ cells in DSS-induced colitis mice, with only minimal expression in CD45⁺ CD64⁺ macrophages. Additionally, overexpression of both ADAMDEC1 mRNA and protein was consistently observed in PDGFRα⁺ cells, but not in CD64⁺ macrophages found in human colonic mucosal tissue affected by Crohn’s disease. In summary, PDGFRα⁺ cells selectively express ADAMDEC1, which is localized to the colon mucosa layer. ADAMDEC1 expression significantly increases in DSS-induced colitis affected mice and Crohn’s disease affected human tissue, suggesting that this gene can serve as a diagnostic and/or therapeutic target for intestinal inflammation and Crohn’s disease.     

Radiation-induced polymerization of ethylene in a pilot plant. I. Bulk process

Radiation-induced bulk polymerization of ethylene was carried out with use of a pilot plant with a 10 liter reactor at pressures of 225–400 kg/cm², temperatures of 30–95°C, ethylene feed rates of 5–28 kg/hr, and dose rate of 3.8 × 10⁵ rad/hr. Characteristics of the process are mild polymerization conditions and capability of producing medium density polyethylene in powder form. The spacetime yield and molecular weight of polymer were in the range of 3.5 to 13.1 g/liter hr and 2.2 × 10⁴ to 14 × 10⁴, respectively. The space-time yield increased with mean residence time and 2.4 powders of pressure, and decreased with temperature. Molecular weight changed similarly with the reaction conditions. These results were consistent with those of the bench plant experiment and the scale effect was small. Polymer deposit to the reactor wall limited a period of continuous operation of the plant. The amount of deposited polymer was increased with the square of reaction time. The rate of polymer deposit was proportional to polymer concentration and to the cube of pressure. The polymer deposit cannot be solved in the bulk process.     

Studies on phase separation rate in porous polyimide membrane formation by immersion precipitation

Phase separation rate during porous membrane formation by immersion precipitation was investigated by light scattering in a polyimide/N‐Methylpyrrolidone (NMP)/water system. In the light scattering measurement, plots of scattered intensity against scattered angle showed maxima in all cases, which indicated that phase separation occurred by a spinodal decomposition (SD). Characteristic properties of the early stage of SD, such as an apparent diffusion coefficient D_app and an interphase periodic distance Λ, were obtained. The growth process of Λ was also followed by light scattering. The growth rate had the same tendency as D_app when water content in the nonsolvent bath and the polymer concentration in the cast solution were changed. The pore size of the final membrane increased with decreasing water content, which was opposite to the tendency of Λ growth rate. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 292–296, 2003     

Porous cellulose acetate membrane prepared by thermally induced phase separation

Microporous cellulose acetate membranes were prepared by a thermally induced phase separation (TIPS) process. Two kinds of cellulose acetate with acetyl content of 51 and 55 mol % and two kinds of diluents, such as 2‐methyl‐2,4‐pentandiol and 2‐ethyl‐1,3‐hexanediol, were used. In all polymer‐diluent systems, cloud points were observed, which indicated that liquid–liquid phase separation occurred during the TIPS process. The growth of droplets formed after the phase separation was followed using three cooling conditions. The obtained pore structure was isotropic, that is, the pore size did not vary across the membrane. In addition, no macrovoids were formed. These pore structures were in contrast with those usually obtained by the immersion precipitation method. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3951–3955, 2003     

Enhancing low-temperature energy harvesting by lead-free ferroelectric Ba(Zr0.1Ti0.9)O3

The energy-harvesting ability of the lead-free ferroelectric Ba(Zr,Ti)O₃ was investigated and greatly enhanced using the Kim novel electrothermodynamic cycle for low-temperature application. Ba(Zr,Ti)O₃ was synthesized with a Zr:Ti ratio of 10:90 (BZT10) by hot-press sintering, which exhibited a mix relaxor-ferroelectric behavior. For power generation using the Kim cycle with low and high temperatures of T_L = 25°C, T_H = 120°C, the most optimized temperature pattern occurred for a heating time of 12.5 s and a cooling time of 22.5 s. Under these conditions, the electric field increased during the novel isodisplacement process, and the displacement variation in the isoelectric step reached the highest value and maximized the BZT10 cycle loop area. Applying these conditions while lowering T_L to 20°C, an energy density N_D = 504 mJ/cm³ was achieved. This value is the highest obtained energy density in a practical test for lead-free ferroelectric bulk material in the BaTiO₃ family.