Selective carbon monoxide adsorbent composed of polystyrene resin having amino groups and copper(I) chloride

A carbon monoxide adsorbent composed of 10 g of a polystyrene resin having amino groups and 70 mmol of copper(I) chloride was prepared by refluxing the resin and copper(I) chloride in acetonitrile, followed by evaporation of the liquid phase at 5 mmHg, 80°C. The adsorbent rapidly adsorbs 15.9 mmol of carbon monoxide under 1 atm at 20°C. 11.4 mmol of adsorbed carbon monoxide are desorbed when the adsorbent is subjected to a reduced pressure (5 mmHg) at 80°C for 10 min. In the second and the later adsorptions, the amount of adsorbed carbon monoxide is virtually constant at 11.4 mmol. The amount of carbon dioxide adsorbed by the adsorbent under 1 atm at 20°C is 2.8 mmol, and the value for methane is 0.0 mmol. The prepared adsorbent is applicable to selective separation of carbon monoxide from gas mixtures containing both carbon dioxide and methane.     

Design optimization of tall tubular lead/acid cells based on an analysis of the reaction distribution

In order to estimate the discharge performance of tall lead/acid cells (with tubular positives), changes in current and potential distributions with discharge progress were calculated with a computer on the basis of plate resistance and the current—potential—time relationship between small facing parts of positive and negative plates. The taller the cell, the larger the voltage drop along the plates. Thus, the discharge time became shorter despite a large amount of available active mass remaining in the bottom part of the plates.Various current-collector designs were evaluated, e.g., one with varying resistance at each height; a side conductor placed along the plates and connected to them at the top, centre and bottom, etc. Results revealed an optimum collector design with which the maximum discharge capacity could be obtained. Furthermore, it was shown that the side conductor markedly improved the discharge performance because the active mass near the connecting parts was appreciably used.     

Discharge behaviour of electrodeposited PbO2 and Pb electrodes

The discharge behaviour of electrodeposited lead dioxide and lead electrodes was investigated under various conditions; the surfaces of the discharged electrodes were observed with a scanning electron microscope. Both the positive and negative electrodes were passivated by a covering of deposited lead sulphate crystals. The amount of lead sulphate required for passivation depended on the size of the crystals.     

SIGHT-A Dedicated Computer Graphics Machine

The. architecture of, and a performance estimate for, the dedicated graphics processor - SIGHT, a high-speed ray tracing machine, are presented. Ray tracing is a vector calculation in 3–dimensional (3–D) space and each ray to be traced can be calculated independently. The SIGHT is designed so that it speeds up the execution of the ray tracing algorithm at two levels of parallel operations: the pixel-level parallel operation by multiprocessors and the instruction-level parallel operation by the new processing element (PE) architecture. The features of the PE are:     

Review of pulmonary toxicity of indium compounds to animals and humans

Due to the increased production of ITO, the potential health hazards arising from occupational exposure to this material have attracted much attention. This review consists of three parts: 1) toxic effects of indium compounds on animals, 2) toxic effects of indium compounds on humans, and 3) recommendations for preventing exposure to indium compounds in the workplace.Available data have indicated that insoluble form of indium compounds, such as ITO, indium arsenide (InAs) and indium phosphide (InP), can be toxic to animals. Furthermore, InP has demonstrated clear evidence of carcinogenic potential in long-term inhalation studies using experimental animals. As for the dangers to humans, some data are available concerning adverse health effects to workers who have been exposed to indium-containing particles. The Japan Society for Occupational Health recommended the value of 3 μg/L of indium in serum as the occupational exposure limit based on biological monitoring to preventing adverse health effects in workers resulting from occupational exposure to indium compounds. Accordingly, it is essential that much greater attention is focused on human exposure to indium compounds, and precautions against possible exposure to indium compounds are most important with regard to health management among indium-handling workers.     

Strategic planning for CIM to enhance the competitive ability

A method of developing strategic CIM is described. Relationship between CIM and firm's competitive power is clarified, and a fundamental planning procedure for CIM is developed for enhancing the competitiveness. In the procedure, the system configuration of CIM is analyzed using 0–1 goal programming techniques. A numerical example is also demonstrated to show the effectiveness of the procedure.     

Three-Dimensional Numerical Simulation of Helically Propagating Combustion Waves

In the present paper, by using a mathematical model for self-propagating high-temperature synthesis, we reveal the three-dimensional structure of so-called spin combustion wave on the inside of cylindrical sample. It is shown that an isothermal surface of regular spin combustion wave has some wings of which number is the same as that of reaction spots on the cylindrical surface and that the isothermal surface with helical wings rotates down with time. Because of this propagating pattern, in this paper, we adopt the more suitable term helical wave. We also obtain the following existence conditions of a helical wave: If physical parameters are set so that a pulsating wave exists stably for the one-dimensional problem, then a helical wave takes the place of a pulsating wave when the radius of cylindrical sample becomes large.