Fuzzy conditional inference under max-⊙ composition

This paper shows that the majority of fuzzy inference methods for a fuzzy conditional proposition “If x is A then y is B,” with A and B fuzzy concepts, can infer very reasonable consequences which fit our intuition with respect to several criteria such as modus ponens and modus tollens, if a new composition called “max-⊙ composition” is used in the compositional rule of inference, though reasonable consequences cannot always be obtained when using the max-min composition, which is used usually in the compositional rule of inference. Furthermore, it is shown that a syllogism holds for the majority of the methods under the max-⊙ composition, though they do not always satisfy the syllogism under the max-min composition.     

Gas analysis of the CVD process for high yield growth of carbon nanotubes over metal-supported catalysts

Changes in the gas composition during the methane chemical vapor deposition growth of single- and double-walled carbon nanotubes over metal-supported MgO catalysts were investigated in an attempt to increase the nanotube yield. Monitoring the gas composition by gas chromatography as a function of the reaction time provides information on the activity and lifetime of the catalyst. The degree of methane decomposition, i.e., the C-H bond dissociation, was closely related to the nanotube yield, and the Fe-Mo binary catalyst exhibited a high activity. The effects of water vapor on the catalytic nanotube growth were also studied by introducing water vapor in the inlet gas. An appropriate amount of water prolonged the lifetime of the catalyst and increased the nanotube yield by 35%.     

Experimental studies of core flow fluctuations and neutron noise in a BWR

Using the instrumented fuel assemblies (IFA) installed in the Japan Power Demonstration Reactor (JPDR)-II core, fluctuations of the inlet and outlet channel flow rates were observed under both conditions of at-power operation and cold core flow circulation. The correlation analysis revealed that the flow fluctuations in any IFA channel showed almost uncorrelated cross-covariance function with other IFA channel flow. To explain the mechanism of the channel flow fluctuations, some hypothetical idea is introduced.     

Review of pulmonary toxicity of indium compounds to animals and humans

Due to the increased production of ITO, the potential health hazards arising from occupational exposure to this material have attracted much attention. This review consists of three parts: 1) toxic effects of indium compounds on animals, 2) toxic effects of indium compounds on humans, and 3) recommendations for preventing exposure to indium compounds in the workplace.Available data have indicated that insoluble form of indium compounds, such as ITO, indium arsenide (InAs) and indium phosphide (InP), can be toxic to animals. Furthermore, InP has demonstrated clear evidence of carcinogenic potential in long-term inhalation studies using experimental animals. As for the dangers to humans, some data are available concerning adverse health effects to workers who have been exposed to indium-containing particles. The Japan Society for Occupational Health recommended the value of 3 μg/L of indium in serum as the occupational exposure limit based on biological monitoring to preventing adverse health effects in workers resulting from occupational exposure to indium compounds. Accordingly, it is essential that much greater attention is focused on human exposure to indium compounds, and precautions against possible exposure to indium compounds are most important with regard to health management among indium-handling workers.     

Effective Characterization of DNA Ligation Kinetics by High-Resolution Melting Analysis

High-resolution melting (HRM) analysis has been improved and applied for the first time to quantitative analysis of enzymatic reactions. By using the relative ratios of peak intensities of substrates and products, the quantitativity of conventional HRM analysis has been improved to allow detailed kinetic analysis. As an example, the ligation of sticky ends through the action of T4 DNA ligase has been kinetically analyzed, with comprehensive data on substrate specificity and other properties having been obtained. For the first time, the kinetic parameters (k_obs and apparent K_m) of sticky-end ligation were obtained for both fully matched and mismatched sticky ends. The effect of ATP concentration on sticky-end ligation was also investigated. The improved HRM method should also be applicable to versatile DNA-transforming enzymes, because the only requirement is that the products have T_m values different enough from the substrates.     

Strategic planning for CIM to enhance the competitive ability

A method of developing strategic CIM is described. Relationship between CIM and firm's competitive power is clarified, and a fundamental planning procedure for CIM is developed for enhancing the competitiveness. In the procedure, the system configuration of CIM is analyzed using 0–1 goal programming techniques. A numerical example is also demonstrated to show the effectiveness of the procedure.     

High-temperature deformation and fracture behaviour of Cu-SiO2 bicrystals

Bicrystals of CU-SiO₂ dispersion-hardened alloys and of pure copper were tensile tested at various temperatures between 450 and 1050 K at a strain rate of 1.5 x 10^–4 sec^–1. In the case of pure copper bicrystals, elongation to fracture did not depend significantly on temperature and the fracture mode was invariably transgranular up to 850 K. On the other hand, the ductility of CU-SiO₂ bicrystals decreased with increase in temperature and the transition in the fracture mode from transgranular to intergranular occurred at around 450 K. SiO₂ particles on grain boundaries play an important role on intergranular fracture by suppressing grain-boundary sliding and also on the retardation of recrystallization during deformation. Two types of Cu-SiO₂ bicrystals having different crystal orientation relationships show quite different deformation and fracture behaviour. This can be explained in terms of the contribution of lattice dislocations to the grain-boundary sliding.     

The fracture behaviors of non-irradiated zircaloy-4 fuel cladding with a pinhole under simulated LOCA conditions

In a case where a pinhole leak occurs in a fuel rod incidentally, it is possible that coolant enters the fuel rod through the pinhole. Since knowledge about the behavior of the fuel rod with a pinhole under LOCA conditions is limited, semi-integral quench tests were performed with non-irradiated zircaloy-4 fuel cladding tubes with a pinhole in order to investigate the difference in the fracture behaviors between normal and leaker fuels under LOCA conditions. Isothermal oxidation temperature and time ranged from 1100 to 1225 °C and 0 to 4200 seconds, respectively. Ballooning and rupture during the heat-up process did not occur in the case of test rods with a pinhole and initially injected water. Initially injected water affected the oxidation behavior of the inner surface of cladding during the test, and the fracture boundary of the test rod was dependent on not only the axial restrained condition during the test but also the existence of a pinhole and initially injected water. This tendency seemed to be related to the amount of oxidation of cladding inner surface caused by the steam which remained in or entered the test rod during the test.     

Elevated Expression of CCN3 in Articular Cartilage Induces Osteoarthritis in Hip Joints Irrespective of Age and Weight Bearing

Osteoarthritis (OA) occurs not only in the knee but also in peripheral joints throughout the whole body. Previously, we have shown that the expression of cellular communication network factor 3 (CCN3), a matricellular protein, increases with age in knee articular cartilage, and the misexpression of CCN3 in cartilage induces senescence-associated secretory phenotype (SASP) factors, indicating that CCN3 promotes cartilage senescence. Here, we investigated the correlation between CCN3 expression and OA degenerative changes, principally in human femoral head cartilage. Human femoral heads obtained from patients who received total hip arthroplasty were categorized into OA and femoral neck fracture (normal) groups without significant age differences. Gene expression analysis of RNA obtained from femoral head cartilage revealed that CCN3 and MMP-13 expression in the non-weight-bearing part was significantly higher in the OA group than in the normal group, whereas the weight-bearing OA parts and normal cartilage showed no significant differences in the expression of these genes. The expression of COL10A1, however, was significantly higher in weight-bearing OA parts compared with normal weight-bearing parts, and was also higher in weight-bearing parts compared with non-weight-bearing parts in the OA group. In contrast, OA primary chondrocytes from weight-bearing parts showed higher expression of CCN3, p16, ADAMTS4, and IL-1β than chondrocytes from the corresponding normal group, and higher ADAMTS4 and IL-1β in the non-weight-bearing part compared with the corresponding normal group. Acan expression was significantly lower in the non-weight-bearing group in OA primary chondrocytes than in the corresponding normal chondrocytes. The expression level of CCN3 did not show significant differences between the weight-bearing part and non-weight-bearing part in both OA and normal primary chondrocytes. Immunohistochemical analysis showed accumulated CCN3 and aggrecan neoepitope staining in both the weight-bearing part and non-weight-bearing part in the OA group compared with the normal group. The CCN3 expression level in cartilage had a positive correlation with the Mankin score. X-ray analysis of cartilage-specific CCN3 overexpression mice (Tg) revealed deformation of the femoral and humeral head in the early stage, and immunohistochemical analysis showed accumulated aggrecan neoepitope staining as well as CCN3 staining and the roughening of the joint surface in Tg femoral and humeral heads. Primary chondrocytes from the Tg femoral head showed enhanced expression of Ccn3, Adamts5, p16, Il-6, and Tnfα, and decreased expression of Col2a1 and -an. These findings indicate a correlation between OA degenerative changes and the expression of CCN3, irrespective of age and mechanical loading. Furthermore, the Mankin score indicates that the expression level of Ccn3 correlates with the progression of OA.