Superconductivity in W-containing diamond-like nanocomposite films

Superconductivity in a tungsten-containing carbon-oxide film was reported. The film with 500 nm thickness was deposited onto polycrystalline silicon oxides using chemical vapor deposition and the co-sputtering of a tungsten metal target. The bonding state of the carbon atoms and the macroscopic and microscopic crystal structure of the film were investigated by Raman spectroscopy, X-ray diffraction and transmission electron microscopy measurements. From the experimental results, we determined that this film essentially had an amorphous structure. The temperature dependence on resistivity was measured in the temperature range of 2–300 K. Resistive superconducting transition was observed at 3.8 K. The dc magnetizations were measured in the temperature range of 1.8–6.5 K. The diamagnetism resulting from a superconductive state was observed below 3.75 K, which is consistent with a resistive superconducting transition. It is thought that the finite sized clusters of the different superconductive transition temperatures cooperatively produce a macroscopic superconducting phenomenon.     

Investigation for Necessity of Dispersivity and Tortuosity in the Dusty Gas Model for a Binary Gas System in Soil

Diffusion, dispersion, and advection are important processes in multi-gas systems in soils. To date, both Fick's model and the Dusty Gas (DG) model have been used to model the movement of gases in these systems. Dispersion is included in the dispersion-advection equation with Fick's Model for the movement of gases in gas-phase of soil, yet the movement of gases in multi-component gas-soil systems is considered to be expressed more accurately by the DG model than by Fick's model. However to date, no study has investigated the necessity of considering dispersion in the Dusty Gas (DG) model. We carried out column experiments for nitrogen-methane, nitrogen-carbon dioxide, and carbon dioxide-methane binary gas systems in sandy soil, and also did simulations on the same systems using both Fick's model and the DG model. A comparison of the results of the column experiments with our simulations confirmed that there was no need to consider the dispersion in the advection-diffusion equations with the DG model when the velocity of gas was 0.05-0.4 cm/s in Toyoura sand. Furthermore, our experiments and simulations with the DG model showed that, rather than dispersion, tortuosity should be taken into account in application of the DG model to the above condition.     

半醉行歌半坐禅京都GIONSYA酒吧/工作室

町屋是日本传统的联排别墅形式,从江户时代起盛行,目前京都还保留了一些町屋.京都町屋的特征之一是狭窄的正面和被称为"鳗鱼床"(Unaginonedoko)的深处.京都现在的町屋经常被改造成商店或旅馆.     

TiAl单晶中〈011]超点阵位错滑移的临界分切应力(CRSS)与晶体取向的关系

γ—ＴｉＡｌ单晶中,＜０１１］超点阵位错的运动方向同晶体取向有关、当沿极射投影图００１一１１０—０１０单位三角形的００１－１１１－０２１区域中的取向变形时,ＳＩＳＦ偏位错为领先位错;而沿三角形中其余区域中的取向变形时,ＡＰＢ偏位错为领先位错．在反常温度区域中（即超点阵位错开动的温度范围内）,前者的ＣＲＳＳ较高,形变的热激活焓也较高,＜０１１超点陈位错的脱钉过程更为困难,造成ＣＲＳＳ反常上升的速率较快．     

Cementation of Sands Due to Microbiologically-Induced Carbonate Precipitation

In this study, microbial precipitation of carbonate was observed using high microbial urease activity, and it was found that the ratio of Mg/Ca affected the types of crystals produced. Without Mg²⁺, calcite was produced using only CaCl₂, while the presence of Mg produced Mg-calcite, magnesite and/or possibly dolomite of round, spherical or fibrous shapes, depending on reaction time, pH and Mg/Ca ratio. The carbonate produced contributed to the development of cementation for sands. The presence of Mg showed a relatively strong cementation of the carbonate.     

Three-Dimensional Numerical Simulation of Helically Propagating Combustion Waves

In the present paper, by using a mathematical model for self-propagating high-temperature synthesis, we reveal the three-dimensional structure of so-called spin combustion wave on the inside of cylindrical sample. It is shown that an isothermal surface of regular spin combustion wave has some wings of which number is the same as that of reaction spots on the cylindrical surface and that the isothermal surface with helical wings rotates down with time. Because of this propagating pattern, in this paper, we adopt the more suitable term helical wave. We also obtain the following existence conditions of a helical wave: If physical parameters are set so that a pulsating wave exists stably for the one-dimensional problem, then a helical wave takes the place of a pulsating wave when the radius of cylindrical sample becomes large.     

A general steady state mathematical model for fin-and-tube heat exchanger based on graph theory

Fin-and-tube heat exchangers are widely used in air conditioners, chillers, etc. A lot of factors, including arrangement of refrigerant circuits, configure specification of fins and tubes, and operating conditions, have significant influence on the performance of fin-and-tube heat exchangers. For the purpose of fast design of high performance heat exchangers, a simulator reflecting the influence of these factors is necessary. In this paper, a general steady state mathematic model based on the graph theory is presented. With the help of the directed graph and graph-based traversal methods (Breadth-first search and Depth-first search), this model is capable to describe any flexible refrigerant circuit arrangement, and quantify the refrigerant distribution in the refrigerant circuit and heat conduction through fins. An alternative iteration method is also developed to solve the conservation equations, which can shorten the simulating time effectively. The model is verified with the experimental results, and the maximum error is within ±10.0%. A simulator based on this model has been used for designing practical fin-and-tube heat exchangers.     

Problem pharmaceutical patents

These days, the number of pharmaceutical patent applications which do not specify the principal active ingredient in the form of a chemical name or structure is increasing. These patents are difficult to retrieve in retrospective on-line searches using chemical structures or keywords. Furthermore, even if you could find them, the situation with regard to patentability is obscure and this causes considerable problems for the experts in charge of the patent search. If you are a searcher for a large pharmaceutical company, you might already be apprehensive of infringing such patents. We, the JFA,^* gathered these patents together and studied the differences between their patentability in Japan, the US and the EPO.     

Te concentration dependent photoemission and inverse-photoemission study of FeSe1?xTex

We have characterized the electronic structure of FeSe_1−xTe_x for various x values using soft x-ray photoemission spectroscopy (SXPES), high-resolution photoemission spectroscopy (HRPES) and inverse photoemission spectroscopy (IPES). The SXPES valence band spectral shape shows that the 2 eV feature in FeSe, which was ascribed to the lower Hubbard band in previous theoretical studies, becomes less prominent with increasing x. HRPES exhibits systematic x dependence of the structure near the Fermi level (E_F): its splitting near E_F and filling of the pseudogap in FeSe. IPES shows two features, near E_F and approximately 6 eV above E_F; the former may be related to the Fe 3d states hybridized with chalcogenide p states, while the latter may consist of plane-wave-like and Se d components. In the incident electron energy dependence of IPES, the density of states near E_F for FeSe and FeTe has the Fano lineshape characteristic of resonant behavior. These compounds exhibit different resonance profiles, which may reflect the differences in their electronic structures. By combining the PES and IPES data the on-site Coulomb energy was estimated at 3.5 eV for FeSe.     

Surface patterning of glass via electrostatic imprinting using a platinum mold

Electrostatic imprinting is a highly suitable process for patterning large area and high efficiency glasses because it enables glass patterning at low temperatures with low pressures. Because high DC voltage bias is applied to the mold and glass during the thermal imprinting, the mold materials should have electrical conductivity, appropriate glass adhesion properties, and excellent thermal and electrochemical stability. In this study, thin Pt/Ni molds were fabricated via Si micromachining and electroforming techniques and were then used in the electrostatic imprint process in order to evaluate their feasibility as molds. Under the investigated process conditions, the pattern transfer to glass was accomplished without noticeable degradation of the mold. Furthermore, the process parameter effects on replication fidelity and potential defects were investigated.