Structural and hydration properties of amorphous tricalcium silicate

Mechanical milling was carried out to synthesize amorphous tricalcium silicate (Ca₃SiO₅) sample, where Ca₃SiO₅ is the most principal component of Portland cement. The partial phase transformation from the crystalline to the amorphous state was observed by X-ray and neutron diffractions. Moreover, it was found that the structural distortion on the Ca-O correlation exists in the milled Ca₃SiO₅. The hydration of the milled Ca₃SiO₅ with D₂O proceeds as follows: the formation of hydration products such as Ca(OD)₂ rapidly occurs in the early hydration stage, and then proceeds slowly after about 15 h. The induction time for the hydration of the milled Ca₃SiO₅ is approximately one half shorter than that for the hydration of the unmilled one. This result means that the mechanical milling brings about the chemical activity of Ca₃SiO₅ for hydration, and may be particularly useful for increasing the reactivity in the early hydration stage.     

Epitaxial growth of WOx nanorod array on W(001)

Nanorods of substoichiometric tungsten oxide (WO_x) were grown on W(001) substrates. Two methods for the growth of nanorods were used: oxidation of the substrate under appropriate conditions and the deposition of tungsten oxide from a tungsten foil heated in the presence of oxygen. The grown nanorods were observed using a scanning electron microscope and an atomic force microscope. The diameters of the nanorods were 5–20 nm. The nanorods were slightly inclined from the directions parallel or normal to the surface. The inclination of nanorods was explained in terms of the epitaxial relationship between WO₃ crystals and the W(001) substrate. The WO₃ crystals formed at the initial stage of growth act as the nuclei of WO_x nanorods. We observed selective enhancement of the growth in a certain epitaxial direction depending on the method of growth, and an array of WO_x nanorods was produced on the W(001) substrate.     

Growth of AgGaTe2 and AgAlTe2 Layers for Novel Photovoltaic Materials

AgGaTe₂ and AgAlTe₂ layers were grown on a-plane sapphire substrates by closed-space sublimation. These compounds replace Cd in CdTe with group I and III elements, and are, hence, expected to be ideal novel candidate materials for solar cells. The grown layers were confirmed to be stoichiometric AgGaTe₂ and AgAlTe₂ by x-ray diffraction (XRD). The AgAlTe₂ layers had strong preference for the (112) orientation. The XRD spectrum of the AgGaTe₂ layer was different from that of the AgAlTe₂ layer, and strong peaks were observed for (103) and (110) diffraction. The variation in orientations of the grown layers was analyzed in detail by use of XRD pole figures, which revealed that the AgGaTe₂ layers had an epitaxial relationship with the a-plane sapphire substrates.     

Investigation on twisting distortion of thin plate stiffened structure under welding

The welding distortion of thin plate was selected as research subject, which causes loss of dimensional control, structural integrity and increases fabrication costs for straightening. To study the characteristic of the welding distortion on thin plate structures, experiments were conducted. The test model was a thin plate stiffened structure and a large twisting distortion was observed. The welding distortion of the same structure was analyzed as a large deformation problem using a thermal elastic plastic FEM and an elastic FEM based on the concept of inherent deformation. The computed results by both methods showed the twisting distortion which is a typical buckling type deformation and the magnitude of this distortion agreed well with the experimental measurement.     

Short communication: Temporal changes in the skin morphology of dairy cows during the periparturient period

Management of dairy cow productivity requires monitoring of their nutritional status by visual observation. It has been suggested that changes in hair coat appearance are among the indicators of nutritional state in dairy cows. Temporal changes in the skin morphology in cows, however, have not been reported. In this study, we examined the changes in the skin of dairy cows that occur during the peripartum period. Seven pluriparous cows were used. Skin samples were collected at 28 d before the due date and 28 d and 56 d after calving for morphological examination. Hair follicle width was 108.8 ± 5.9 µm (±SD) in the dry period, 95.5 ± 5.5 µm at 28 d after calving, and 104.2 ± 5.3 µm at 56 d postpartum. The percentages of anagen hair follicles during these 3 periods were 41.4 ± 3.4, 18.5 ± 3.4, and 32.3 ± 3.3%, respectively. The corresponding sebaceous gland sizes were 8,362.0 ± 707.6, 7,800.0 ± 831.4, and 9,186.8 ± 962.6 µm², respectively. Hair follicle width was positively correlated with percentage of anagen hair follicles. The thickness of epidermal and proliferation rate of epidermal cell were also correlated. However, the hair follicle width, sebaceous gland size and cell proliferation rate, and thickness and proliferation rate of epidermal cells did not show any marked changes.     

Evaluation of Two Sets of Sorghum Bagasse Samples as the Feedstock for Fermentable Sugar Recovery via the Calcium Capturing by Carbonation (CaCCO) Process

Abstract: Sorghum bagasse samples from two sets (n6 and bmr6; n18 and bmr18) of wild-type and corresponding “brown midrib” (bmr) mutant strains of sweet sorghum were evaluated as the feedstock for fermentable sugar recovery via the calcium capturing by carbonation (CaCCO) process, which involves Ca(OH)₂ pretreatment of bagasse with subsequent neutralization with CO₂ for enzymatic saccharification. Saccharification tests under various pretreatment conditions of the CaCCO process at different Ca(OH)₂ concentrations, temperatures or residence periods indicated that bmr strains are more sensitive to the pretreatment than their counterparts are. It is expected that variant bmr6 is more suitable for glucose recovery than its wild-type counterpart because of the higher glucan content and better glucose recovery with less severe pretreatment. Meanwhile, bmr18showed higher scores of glucose recovery than its counterpart did, only at low pretreatment severity, and did not yield higher sugar recovery under the more severe conditions. The trend was similar to that of xylose recovery data from the two bmr strains. The advantages of bmr strains were also proven by means of simultaneous saccharification and fermentation of CaCCO-pretreated bagasse samples by pentose-fermenting yeast strain Candida shehatae Cs 4R. The amounts needed for production of 1 L of ethanol from n6, bmr6, n18, and bmr18samples were estimated as 4.11, 3.46, 4.03, and 3.95 kg, respectively. The bmr strains seem to have excellent compatibility with the CaCCO process for ethanol production, and it is expected that integrated research from the feedstock to bioprocess may result in breakthroughs for commercialization.     

Hydrophobic Tagged Dihydrofolate Reductase for Creating Misfolded Glycoprotein Mimetics

In the endoplasmic reticulum (ER), nascent glycoproteins that have not acquired the native conformation are either repaired or sorted for degradation by specific quality‐control systems composed by various proteins. Among them, UDP‐glucose:glycoprotein glucosyltransferase (UGGT) serves as a folding sensor in the ER. However, the molecular mechanism of its recognition remains obscure. This study used pseudo‐misfolded glycoproteins, comprising a modified dihydrofolate reductase with artificial pyrene–cysteine moiety on the protein surface (pDHFR) and Man₉GlcNAc₂‐methotrexate (M9‐MTX). All five M9‐MTX/pDHFR complexes, with a pyrene group at different positions, were found to be good substrates of UGGT, irrespective of the site of pyrene modification. These results suggest UGGT's mode of substrate recognition is fuzzy, thus allowing various glycoproteins to be accommodated in the folding cycle.