Guinea pig bone marrow cells treated with platelet-activating factor generate factor(s) which affects their DNA synthesis and microbicidal activity

We have previously reported that platelet-activating factor (PAF) induces proliferation and microbicidal activity of guinea pig bone marrow cells. In the present study, we have found that the conditioned medium of PAF- or nonmetabolizable PAF agonist-treated guinea pig bone marrow cells augmented DNA synthesis and induced microbicial activity of bone marrow cells. A PAF specific antagonist, CV-6209, inhibited generation of the active conditioned medium by PAF. Addition of the PAF antagonist only partially suppressed the augmentative effect of the active conditioned medium on DNA synthesis; this is consistent with the fact that, because of the rapid breakdown, no appreciable amount of PAF remained in the conditioned medium of PAF-treated cells. Although mouse bone marrow cells did not respond to PAF unlike guinea pig cells, their DNA synthesis was significantly enhanced by the conditioned medium of PAF-treated guinea pig bone marrow cells. Thus, some newly generated factor(s) distinct from the originally inoculated PAF seemed to modulate the bioactions of PAF on bone marrow cells. An appreciable amount of PAF was produced by calcium ionophore-treated guinea pig bone marrow cells. These findings indicate that PAF synthesized in guinea pig bone marrow cells induces generation in the cells of some factor(s) which affects proliferation or microbicidal activity. Presented at The Third International Conference on Platelet-Activating Factor and Structurally Related Ether Lipids, Tokyo, Japan, May 1989.     

Synthesis of γ-Ga2O3–Al2O3 Solid Solutions by the Glycothermal Method

The reaction of mixtures of aluminum isopropoxide and gallium acetylacetonate in 1,4-butanediol or 1,5-pentanediol at high temperatures (glycothermal reaction) directly gave the γ-Ga₂O₃–Al₂O₃ solid solutions, which had high catalytic activities for selective reduction of NO using methane as the reducing agent. However, the reaction with a higher Al/(Ga+Al) charged ratio yielded the glycol derivative of boehmite as a by-product and the catalytic activity of the solid solution decreased. Therefore, synthesis of the solid solution using various glycols was examined and it was found that solid solutions with high Al contents without contamination of the glycol derivative of boehmite were obtained by using 1,6-hexanediol as a reaction medium. The solid solution exhibited a higher NO conversion than that synthesized in other glycols.     

Effect of reaction kinetics of polymer electrolyte on the ion‐conductive behavior for poly(oligo oxyethylene methacrylate)–LiTFSI mixtures

The effect of the reaction kinetics on the ionic conductivity for a comblike‐type polyether (MEO) electrolyte with lithium bis(trifluoromethane sulfonyl)imide (LiTFSI) was characterized by DSC, complex impedance measurements, and ¹H pulse NMR spectroscopy. The ionic conductivity of these electrolytes was affected by the reaction condition of the methacrylate monomer and revealed by the glass transition temperature (T_g), spin–spin relaxation time (T₂), steric effects of the terminal groups, and the number of charge carriers indicated by the VTF kinetic parameter. In this system, the electrolytes prepared by the reaction heating rate of 10°C/min of MEO–H and 15°C/min of MEO–CH₃ showed maximum ionic conductivity, σ_i, two to three times higher in magnitude than that of the σ_i of the others at room temperature. As experimental results, the reaction kinetic rate affected the degree of conversion, the ionic conductivity, and the relaxation behaviors of polyether electrolytes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2149–2156, 2003     

Heat transfer to laminar flow with temperature — dependent heat generation

Two problems were solved theoretically on the heat transfer to circular tube flow with internal heat source. The one problem is to maintain the mixed-mean temperature of fluid at the inlet temperature. The other is a conjugated problem with a uniformly specified temperature at the outside surface of the wall, accounting for the wall conduction. From the numerical example for the former, it is shown that the mixed-mean temperature can be controlled within 15% error under the estimated condition. From the numerical results for the latter, it is concluded that the influence of wall conduction is more serious than the case without heat generation.     

Sedimentation equilibrium study on preferential interaction of protein with solvent components

A sedimentation equilibrium equation was derived in weight-per-volume concentration units to evaluate the degree of preferential binding of one solvent component to a homogeneous neutral macromolecule in a mixture of two components. Using the equation, the preferential binding of chloroethanol to β-lactoglobulin A was calculated from sedimentation equilibrium data, and the result showed good agreement with values obtained by light scattering and refractive index increment experiments. It was also demonstrated that the preferential interaction can in principle be determined by density increment measurements under different conditions: at constant molality and at constant chemical potential of solvent.     

High-strength–high-modulus polyimide fibers II. Spinning and properties of fibers

The polyimides based on 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) described in Part I of this series were dissolved in p-chlorophenol and spun into fibers using a coagulating bath of ethanol. The fibers as spun had in general low tenacities and low moduli, but a heat treatment at 300–500°C under tension produced a remarkable increase in strength and modulus, and fibers with a tensile strength of 26 g/den (3.1 GPa) and an initial modulus higher than 1,000 g/den (120 GPa) could be obtained. Thus, the annealed fibers of polyimides are comparable to aramid fibers in mechanical properties. To heating in air and in the saturated steam, the polyimide fibers showed higher resistance than the aramid fibers. The polyimide fibers surpassed the aramid fibers in resistance to acid treatment and ultraviolet (UV) irradiation, but were inferior in resistance to alkali treatment. The annealed fibers of polyimides displayed distinct X-ray diffraction patterns. The chain repeat distance of 20.5 Å determined on the fibers of polyimide prepared from BPDA and o-tolidine, and 20.6 Å determined on the fibers of polyimide derived from BPDA and 3,4′-diaminodiphenyl ether are reasonable when the dimensions of monomeric units and the shapes of the molecular chains are considered. The X-ray reflections of both polyimide fibers were indexed satisfactorily on the basis of postulated unit cells.     

Toughening of cycloaliphatic epoxy resins by poly(ethylene phthalate) and related copolyesters

Poly(ethylene phthalate) (PEP) and poly(ethylene phthalate–co‐ethylene terephthalate) were used to improve the brittleness of the cycloaliphatic epoxy resin 3,4‐epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate (Celoxide 2021?), cured with methyl hexahydrophthalic anhydride. The aromatic polyesters used were soluble in the epoxy resin without solvents and effective as modifiers for toughening the cured epoxy resin. For example, the inclusion of 20 wt % PEP (MW, 7400) led to a 130% increase in the fracture toughness (K_IC) of the cured resin with no loss of mechanical and thermal properties. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviors of the modified epoxy resin system. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 388–399, 2002; DOI 10.1002/app.10363     

Synthesis, structure and mechanical properties of Zr-Cu-based bulk metallic glass composites

The unusual glass-forming ability(GFA) of the Zr_(48)Cu_(36)Ag_8Al_8 alloy and the high ductility of the Zr_(48)Cu_(36)Ag_8Al_8 metallic glass-matrix composites containing Ta powder were reported.The bulk metallic glass rod with a diameter of 25 mm was successfully synthesized using copper mold casting for the Zr_(48)Cu_(36)Ag_8Al_8 alloy.High GFA of this alloy was found to be related to a large supercooled liquid region and a quaternary eutectic point with low melting temperature.The bulk metallic glass...     

Synthesis of diameter-controlled carbon nanotubes using centrifugally classified nanoparticle catalysts

Iron-based nanoparticles, centrifugally classified by size, with variation of subnanometer order, have been used for the growth of diameter-controlled carbon nanotubes (CNTs) for the first time via catalytic chemical vapor deposition. The centrifugal classification of nanoparticles is facilitated by fractional precipitations through the sequential addition of ethanol to a hexane solution containing the nanoparticles. Three different nanoparticle sizes were obtained, which have average diameters and standard deviations of 3.9 ± 0.8 nm, 3.3 ± 0.6 nm, and 2.8 ± 0.4 nm. By the classification process of nanoparticles, the standard deviation of the average diameter of the fractionated nanoparticles decreased by around one half of that of the as-synthesized nanoparticles. In addition, we demonstrate a technique for estimating the average diameter of each classified nanoparticle using conventional low-angle X-ray diffraction, without the need for time-consuming TEM observation and analysis. From the three classified nanoparticle sizes, with average diameters of 2.8, 3.3, and 3.9 nm, CNTs with average diameters of 3.1, 3.6, and 4.5 nm were obtained by changing growth temperatures, respectively. Therefore, centrifugally classified nanoparticles are one of the most promising ‘seeds’ for use in the diameter-selective growth of CNTs.     

Novel synthesis of microcrystalline titanium(IV) oxide having high thermal stability and ultra-high photocatalytic activity: thermal decomposition of titanium(IV) alkoxide in organic solvents

Thermal decomposition of titanium(IV) tetra-tert-butoxide (TTB) in inert organic solvents at 573 K yielded microcrystalline anatase (titanium(IV) oxide, TiO₂) powders with a crystallite size of ca. 9 nm and a surface area of <100 m² g^-1. Primary and secondary alkoxides of titanium(IV), however, were not decomposed under similar conditions, indicating that the thermal stability of C-O bonds in the alkoxides was a decisive factor for their decomposition. The TiO₂ prepared from TTB by this manner was thermally stable upon calcination in air and retained high surface area of ca. 100 m² g^-1 even after calcination at 823 K. The as-prepared TiO₂ powders, without calcination, exhibited much higher rate of carbon dioxide formation than any other active photocatalysts such as Degussa P-25 and Ishihara ST-01 in the photocatalytic mineralization of acetic acid in aerated aqueous solutions. The higher activity of the present TiO₂ photocatalysts is attributed to both high crystallinity and large surface of the present product. The calcination of the as-prepared TiO₂ in air reduced the photocatalytic activity, but it was still higher than the other commercially available TiO₂'s. This revised version was published online in July 2006 with corrections to the Cover Date.