Size dependence of crystallization within spherical microdomain structures

We have investigated the size dependence of crystallization within spherical microdomains formed in various poly(ε-caprolactone)-block-polybutadiene diblock copolymers (PCL-b-PB). The crystallinity (χ) and melting temperature (T_m) of the PCL block are considerably lower than those of PCL homopolymer, and χ decreases steadily and T_m decreases only slightly with decreasing radius of PCL spheres (R) for a series of PCL-b-PB with a same molecular weight (M_n). When PCL-b-PB is compared with the similar R but different M_n, χ is significantly different, suggesting that the sphere size is not the unique factor to control crystallization within spherical microdomains.     

Steam Reforming of Methanol on Copper Catalysts Supported on Large-Surface-Area ZnAl2O3

Steam reforming of methanol on various supported Cu catalysts was examined. Supports strongly affected catalyst activity and, among the catalysts tested, Cu catalyst supported on large-surface-area ZnAl₂O₄ showed the highest activity, which, to the best of our knowledge, was higher than those for the supported catalysts reported so far. For supported Cu catalysts, two species were observed. One was a dispersed Cu species having strong interaction between Cu and support, and the other was an isolated Cu species. The activity of the former species strongly depended on supports.     

Development of AAS resin by the emulsion–suspension polymerization method

In order to improve the weatherability of acryonitrile—styrene—butadiene rubber graft polymer (ABS resin), an attempt was made to develop a resin (AAS resin) in which acrylic rubber of good weatherability was used instead of butadiene rubber. First, by copolymerizing dicyclopentenyl-methacrylate (DCP-MA,3%) with butyl acrylate, crosslinked acrylic rubber was obtained. This also introduced grafting sites into the rubber. Next, methods of graft copolymerizing styrene and acrylonitrile with this rubber were examined. An emulsion–suspension polymerization method was developed in which the initial stage of the polymerization, emulsion polymerization, changed into suspension polymerization during the process. By this method of polymerization, rubber particles were combined and enlarged, bringing about a graft-type resin with high impact resistance. This polymerization method is industrially useful because particle-shaped resins are obtained without the need of a salting-out process. The AAS resin, obtained in this way, has much improved weatherability over ABS resin and shows strength equal to that of ABS resin. © 1992 John Wiley & Sons, Inc.     

Efficacy of Chemical Mimicry by Aphid Predators Depends on Aphid-Learning by Ants

Chemical mimicry is an effective strategy when signal receivers recognize and discriminate models by relying on chemical cues. Some aphid enemies mimic the cuticular chemicals of aphids through various means thus avoiding detection and attack by aphid-tending ants. However, because ants have been reported to learn the chemical signatures of aphids in order to distinguish the aphids, the efficacy of chemical mimicry is predicted to depend on the experience of the ants that had tended aphids. The present study tested this hypothesis using two predator species: larvae of the green lacewing Mallada desjardinsi, and larvae of the ladybeetle Scymnus posticalis. Lacewing larvae carry the carcasses of aphids on which they have preyed upon their backs, and these function via chemical camouflage to reduce the aggressiveness of aphid-tending ants toward the larvae. Ladybeetle larvae reportedly produce a covering of wax structures, and their chemicals appear to attenuate ant aggression. We examined whether the behavior of the ant Tetramorium tsushimae toward these predators changed depending on their aphid-tending experience. Ants moderated their aggressiveness toward both predators when they had previously tended aphids, indicating that chemical mimicry by both aphid predators is dependent on previous experience of the ants in tending aphids. Chemical mimicry by the predators of ant-tended aphids is therefore considered to exploit learning-dependent aphid recognition systems of ants.     

Oxygen-Deficient Anatase Precipitated from High-Temperature Plasma

Feeding atomized aqueous solutions containing TiCl₄ into an argon high-temperature inductively coupled plasma (ICP) resulted in the formation of mixtures of white and blue particles. The mixtures consisted of anatase and an extra phase of rutile. Adding oxygen to the ICP led to the production of a single phase of white anatase. The blue particles could be characterized as oxygen-deficient anatase. Electrophoretic mobility measurements indicated that Na+ participated in determining the surface potential of the mixtures. The oxygen defects may provide the adsorption sites to Na+.     

Synthesis of Thermally Stable χ-Alumina by Thermal Decomposition of Aluminum Isopropoxide in Toluene

Thermal decomposition of aluminum isopropoxide in toluene at 315°C resulted in χ-alumina that had high thermal stability, whereas the reaction at lower temperatures resulted in formation of an amorphous product. The χ-alumina thus obtained directly transformed to α-alumina at ∼1150°C, bypassing the other transition alumina phases, whereas the amorphous product transformed to γ-alumina and then to θ-alumina before final transformation to α-alumina. When the χ-alumina, solvothermally synthesized at 315°C, was recovered by the removal of the solvent at the reaction temperature, thermal stability of the product was improved further. This procedure is convenient because it avoids bothersome work-up processes that yield large-surface-area and large-pore-volume alumina.     

Effect of glass transition temperature on heat‐responsive gas bubbles formation from polymers containing tert‐butoxycarbonyl moiety

Various types of polymers containing tert‐butoxycarbonyl (BOC) moiety as the typical protecting group of functional moieties have been used for the design of stimuli‐responsive polymer materials. In this study, we investigated the heat‐responsive deprotection behavior of BOC‐containing polymers obtained by radical polymerization of 4‐(tert‐butoxycarbonyloxy)styrene (BSt) and copolymerizations of BSt with styrene and methyl acrylate. The deprotection of BOC groups accompanying the evolution of isobutene and carbon dioxide as gaseous products was monitored by thermogravimetric analyses at different temperature circumstances; that is, on heating at a rate of 10 °C/min and under isothermal conditions at various temperatures. The deprotection resulted in a significant decrease in the transmittance of visible light due to the formation of a large number of gas bubbles, that is, foaming, in the polymer films when a heating temperature was close to the glass transition temperature of the used polymer. The potential of BOC‐containing polymers was also evaluated as the heat‐responsive adhesive polymers for dismantlable adhesion. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46252.     

Stereoselective partitioning of organic substrates by thermoresponsive polymers in aqueous phases

Partitioning of organic substrates by thermoresponsive polymer having N‐acryloylaminoalcohol moieties in aqueous phase has been studied. Thermoresponsive polymers, such as poly(N‐isopropylacrylamide) (PNIPAAm) and poly(NIPAAm‐co‐N‐acryloyl‐(±)‐alaninol) (poly(NIPAAm‐co‐HIPAAm)), were found to concentrate several organic substrates into the hydrophobic field generated during their phase transition. The amount of the substrates recoverd from the polymer phase mainly depended on the hydrophobicity of the substrates. Aqueous solutions of PNIPAAm (lower critical solution temperature, LCST = 33°C) and poly(NIPAAm‐co‐HIPAAm) (LSCT = 41°C) containing 1‐phenylethanol showed LCSTs at 22°C and 33°C, respectively. The changes of LCSTs indicate that specific interactions such as hydrogen bonding between the side chain functionalities of the polymers and the substrates influence the phase transition behavior. Moreover, new optically active polymers having chiral aminoalcohol moieties have been synthesized by copolymerizations of NIPAAm with N‐acryloylaminoalcohols such as N‐acryloyl‐(S)‐alaninol and N‐acryloyl‐(S)‐prolinol. The (R)/(S) ratio of 1‐phenylethanol recovered from poly(NIPAAm‐co‐N‐acryloyl‐(S)‐alaninol) and poly(NIPAAm‐co‐N‐acryloyl‐(S)‐prolinol) were determined to be 75/25 and 68/32, respectively. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3458–3464, 2013     

Tetra-Repeat Microsatellite Markers for the Masu Salmon (Oncorhynchus masou masou) and Its Application in Cross-Subspecies Amplification

We developed tetranucleotide-repeat microsatellite markers for the masu salmon (Oncorhynchus masou) complex. 454 pyrosequencing was used to discover repeat motifs, and seven polymorphic microsatellite-primer sets were identified. The number of alleles detected at each locus ranged from four to 24 and the expected heterozygosity varied from 0.57 to 0.92. Cross-subspecies amplification for O. m. masou, O. m. ishikawae and O. m. subsp. was successful. These microsatellites can be utilized in studies of genetic structure, genetic diversity, and intra- and inter-subspecific hybridization, making a contribution to conservation and management of the Oncorhynchus masou complex.