Tensile properties of ultrahigh strength PAN-based, ultrahigh modulus pitch-based and high ductility pitch-based carbon fibers

The tensile properties and fracture behavior of ultrahigh tensile strength PAN-based (T1000GB), ultrahigh modulus pitch-based (K13D) and high ductility pitch-based (XN-05) carbon fibers have been investigated. The statistical distributions of the tensile strength were characterized. The Weibull modulus for the T1000GB, K13D and XN-05 fibers were calculated to be 5.9, 4.2 and 7.9, respectively. The results clearly show that for PAN- and pitch-based carbon fibers, the Weibull modulus decreases with an increase in the tensile modulus and the mean tensile strength.     

Autotaxin May Have Lysophosphatidic Acid-Unrelated Effects on Three-Dimension (3D) Cultured Human Trabecular Meshwork (HTM) Cells

Purpose: The objective of the current study was to evaluate the effects of the autotaxin (ATX)–lysophosphatidic acid (LPA) signaling axis on the human trabecular meshwork (HTM) in two-dimensional (2D) and three-dimensional (3D) cultures of HTM cells. Methods: The effects were characterized by transendothelial electrical resistance (TEER) and FITC-dextran permeability (2D), measurements of size and stiffness (3D), and the expression of several genes, including extracellular matrix (ECM) molecules, their modulators, and endoplasmic reticulum (ER) stress-related factors. Results: A one-day exposure to 200 nM LPA induced significant down-sizing effects of the 3D HTM spheroids, and these effects were enhanced slightly on longer exposure. The TEER and FITC-dextran permeability data indicate that LPA induced an increase in the barrier function of the 2D HTM monolayers. A one-day exposure to a 2 mg/L solution of ATX also resulted in a significant decrease in the sizes of the 3D HTM spheroids, and an increase in stiffness was also observed. The gene expression of several ECMs, their regulators and ER-stress related factors by the 3D HTM spheroids were altered by both ATX and LPA, but in different manners. Conclusions: The findings presented herein suggest that ATX may have additional roles in the human TM, in addition to the ATX–LPA signaling axis.     

Optical properties of alumina ceramics as a substrate of thin film solar cells

For full understanding of the optical properties of alumina ceramics which are used as a substrate of thin film c-Si solar cells, we carried out computer simulations of diffuse reflectance and measurements of angle-resolved reflectance. As the result of the computer simulations, we obtained a theoretical expression for the reflectance properties of alumina ceramics with flat surface. The expression can be applied for the measured reflectance of alumina ceramics with rough surface when an effect of surface condition was taken into account.     

Optimization of antireflection coating for VO2-based energy efficient window

Vanadium dioxide (VO₂) films have been proposed as energy efficient window coatings for their thermochromism, with which the solar energy transmission in the IR region may be controlled passively. These coatings suffer from low visible (or luminous) transmission (380–760 nm in wavelength), which hinders their practical uses. We here consider an antireflection (AR) coating for the VO₂-based window. Optical calculation was first performed upon a basic structure for thermochromic window composed of a VO₂ layer on glass with an AR layer of refractive index n and thickness d. Optimization was carried out on n and d for a maximum integrated luminous transmittance (T_lum). The calculation demonstrates that the optimal n value changes with thickness of VO₂, and at n≈2.2 it gives the highest T_lum enhancement from 32% (without AR coating) to 55% for 50-nm VO₂. Experiment was done on a structure of 50-nm VO₂ on quartz glass using ZrO₂, of which n≈2.2 matching the best n value, as AR coating. Formation of an optimized structure, ZrO₂ (56 nm)/VO₂ (50 nm)/quartz, was done by sputtering, and its optical properties were characterized with spectrophotometry. An improvement of T_lum from 32.3% to 50.5% was confirmed for the semiconductor phase with similarity also for the metallic one. The IR switching properties were not much deteriorated.     

Molecular dynamics simulation of dislocation nucleation and motion at γ/γ′ interface in Ni-based superalloy

Molecular dynamics simulations are conducted on the dislocation behavior at the apices and edges of cuboidal Ni₃Al precipitate in a pure Ni matrix, or the idealized γ/γ′ microstructure in a Ni-based superalloy. A tensile simulation of the [001] direction is implemented with a periodic cell that has eight cubic precipitates in order to investigate the nucleation site of dislocation in the idealized microstructure with no defects other than the γ/γ′ interfaces. The effect of residual internal stresses on the stability of the interfaces is also discussed. Other simulations are conducted on the behavior of edge dislocations nucleated from a free surface and proceeding in the γ matrix toward γ′ precipitates under shear force. Dislocation pinning at γ′ precipitates, bowing-out in the γ channel, pile-up and nucleation of superdislocation in the γ′ precipitate are simulated and inspected in detail. Discussions on the size of the γ/γ′ microstructure and the sharpness of the edge of the γ′ precipitate are also presented.     

A useful method for observing intracellular structures of free and cultured cells by scanning electron microscopy

Scanning electron microscopy (SEM) using osmium-maceration methods has been used for analyzing the three-dimensional structure of cell organelles in tissue samples, but it has been quite difficult to observe free and cultured cells with this technique. The present study was performed to develop a method that can be applied to free and cultured cells for SEM studies of intracellular structures after osmium maceration. The method was also applied to light microscopy (LM) and to transmission electron microscopy (TEM). HeLa cells and human leukocytes were fixed with a mixture of 0.5% paraformaldehyde and 0.5% glutaraldehyde followed by an additional fixation with 1% osmium tetroxide. These cells were embedded in low-melting-point agarose. A temperature-responsive dish was also used for collection of cultured cells before embedding. For LM and TEM, the cell-embedded agarose was further embedded in epoxy resin, and semi- and ultrathin sections were examined conventionally. For SEM, the agarose was freeze-fractured in 50% dimethyl sulfoxide, processed for osmium maceration and observed in a high-resolution SEM. Low-melting-point agarose was useful as an embedding medium for SEM, because it was well preserved during prolonged osmication for SEM. Thus, the fine structure of cell organelles was clearly analyzed by SEM after osmium-maceration treatment. These SEM images could also be compared with those of LM and TEM of the agarose-embedded tissues.     

Dielectric properties of woven fabric glass fiber reinforced polymer-matrix composites in the THz frequency range

Electromagnetic wave transmittances of plain woven fabric glass fiber reinforced epoxy matrix composite (PW-GFRP) and eight-harness-stain fabric glass fiber reinforced polyimide matrix composite (8H-GFRP) with 1.0 mm thickness were measured in a terahertz (THz) frequency range. The transmittance values for both composites are nearly zero at a frequency of 1.0 THz. The real parts of the complex dielectric constant, ε′(ω) are 4.45 and 3.87 for PW-GFRP and 8H-GFRP, respectively, in the frequency range from 0.2 to 1.0 THz, and they are almost frequency independent. Conversely, the imaginary parts of the dielectric constant, ε′′(ω) for both composites linearly increases with increase of the frequency from 0.13 to 0.37 for PW-GFRP, and from 0.12 to 0.33 for 8H-GFRP.     

Linkage between polarisation characteristics over two different patterns of instantaneous large DGD occurrence

Through long-term field fibre PMD measurement, two occurrence patterns of large instantaneous differential group delays (DGDs), of less than 10^-5 probability, were observed. Most high DGD occurrences, which continue more than hours in limited bandwidth, clearly show positive correlation with ambient temperature even though most of the fibres are buried; and only an emergent spike, which seems not to relate to temperature, was also recorded. In both patterns, second-order polarisation mode dispersion on the wavelength at the same timing has local maximum values with the same occurrence patterns, but PDL does not have local maximum values on the wavelength at the same timing.     

Effect of Contact Stiffness on Creep-Groan Occurrence on a Simple Caliper-Slider Experimental Model

In this paper, a fundamental mechanism for creep-groan generation is investigated by adopting a simple yet effective caliper-slider experimental model. Contact condition, which is a function of three parameters, namely normal force, contact roughness, and material combination, is connected with the creep-groan phenomenon in terms of contact stiffness. Creep-groan generation is determined by analyzing the frequency characteristic of the generated vibration acceleration when the sliding commences due to a simultaneous application and release of force in the tangential and normal directions, respectively. As per the obtained results, creep-groan occurrence or absence in the employed experimental model may be classified into three regions based upon the value of the contact stiffness, i.e., occurrence, non-occurrence, and mixed regions. The results also indicate that creep-groan occurrence in this caliper-slider experimental model can be avoided by controlling the value of contact stiffness in an effective manner.