Microstructure and Thermal Shock Resistance of Molten Glass-Coated Carbon Materials Fabricated by Interfacial Control

Carbon substrates were coated completely with a molten silicate glass, where the wettability of carbon to glass was improved by infiltration and pyrolysis of perhydropolysilazane. Microstructures of the carbon–glass interface were dependent on P n ₂ during coating. Coating at lower P n ₂ induced the formation of cristobalite at the carbon–glass interface. When the coating was performed at higher P n ₂, the glass and carbon were strongly adhered, without the formation of cristobalite. Coating at higher P n ₂ improved the thermal shock resistance of the glass layer, because crack initiation was not induced by the phase transformation of cristobalite during the cooling process. In the case of coating at higher P n ₂, an oxynitride glass layer was formed at the glass subsurface by dissolution of N₂. A porous glass subsurface layer with uniform spherical micro-pores could be produced by soaking near the glass transition temperature in a steam environment. The porous layer with fine and homogeneous microstructure acts as a thermal shock absorbing layer, so that glass-coated carbon with a porous glass layer has excellent thermal shock resistance in addition to steam oxidation resistance.     

Effect of platelet-activating factor on lipoprotein lipase and blood lipids

We investigated the effect of platelet-activating factor (PAF) and of the PAF specific antagonist CV-6209 on plasma lipid metabolism, and particularly on post-heparin plasma lipolytic activity in male Wistar rats. Lipoprotein lipase (LPL) activity was enhanced by intravenous injection of PAF before intravenous injection of heparin when the PAF dose was low (0.2 μg/kg). PAF activated hepatic triacylglycerol lipase (HTGL) activity dose-dependently. Plasma triacylglycerols (TG) significantly decreased with the activation of LPL and/or HTGL. Plasma total cholesterol (TC) and phospholipid (PL) levels decreased at a low dose of PAF (0.2 μg/kg), but increased when higher doses were used. The PAF antagonist CV-6209 partially reversed the PAF induced effects on HTGL, TC and PL. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

Application of silica-containing nano-composite emulsion to wall paint: A new environmentally safe paint of high performance

A new emulsion-type paint was prepared by utilizing a nano-composite emulsion (NCE), which contained nano-size particles (ca. 60 nm in diameter) consisting of silica (inorganic core, ca. 30 nm in diameter) and polyacrylate (organic shell), and evaluated as wall paint. By applying NCE for the wall paint, about 35 wt.% of the organic content in the paint could be reduced in comparison with the commodity emulsion-type paint, which is highly effective to save the petroleum resources. The basic properties of the white NCE paint film on gloss, surface hardness, adhesion, and solvent resistance were evaluated and compared with those of acrylic emulsion-type paints as well as those of silica-containing paints which were prepared simply by blending the acrylic emulsion with silica sol. The NCE paint was especially excellent in solvent resistance. Then the practical tests were performed to evaluate its appropriateness as wall paint, which clarified the excellent antipollution property and the high flame resistance of the NCE paint.     

The Effectiveness of Latent Semantic Analysis for Building Up a Bottom-up Taxonomy from Folksonomy Tags

In this paper, we evaluate the effectiveness of a semantic smoothing technique to organize folksonomy tags. Folksonomy tags have no explicit relations and vary because they form uncontrolled vocabulary. We discriminates so-called subjective tags like “cool” and “fun” from folksonomy tags without any extra knowledge other than folksonomy triples and use the level of tag generalization to form the objective tags into a hierarchy. We verify that entropy of folksonomy tags is an effective measure for discriminating subjective folksonomy tags. Our hierarchical tag allocation method guarantees the number of children nodes and increases the number of available paths to a target node compared to an existing tree allocation method for folksonomy tags.     

Reduction of higher harmonic sequences in terminal voltage of an AC exciting synchronous generator using magnetically anisotropic slot wedges

This paper describes relationships between characteristics of a magnetically anisotropic slot wedge and voltage higher harmonics in an ac exciting synchronous generator terminal due to permeance ripple caused by an open-slot-type rotor. From the relationships obtained, practical guidelines were formulated for machine designs applying the magnetically anisotropic slot wedge. The results are as follows.

• 1 (1) Equivalent permeability of the magnetically anisotropic slot wedge became isotropic wedge permeability for air-gap flux ripple.
• 2 (2) Two ways were identified to reduce voltage-higher harmonics by using the slot wedges.
• 3 (3) The level of leakage flux passing through the anisotropic slot wedge was determined only by its permeability in the width direction.
• 4 (4) Effectiveness of the magnetic anisotropic slot wedges inserted into the stator slots was verified from experimental results using a model machine of the open- slot-type rotor.

     

Automatic detection of the topographical distribution of EEG rhythms based on an iterative adjustment of the averaged reference potential

Electroencephalogram (EEG) interpretation is important for the investigation of brain diseases. In this study, an automatic technique was developed to detect the topographical distribution of EEG rhythms. In order to obtain the topographical distribution, the amplitude of the EEG rhythm was analyzed based on the referential derivation where the reference potential was adjusted iteratively. The result of the automatic detection of the topographical distribution was helpful in highlighting the EEG rhythms of interest for automatic EEG interpretation. The technique developed has application significance for real clinics.     

Interactive multiobjective fuzzy random programming through the level set-based probability model

This paper considers a multiobjective linear programming problem involving fuzzy random variable coefficients. A new fuzzy random programming model is proposed by extending the ideas of level set-based optimality and a stochastic programming model. The original problem involving fuzzy random variables is transformed into a deterministic equivalent problem through the proposed model. An interactive algorithm is provided to obtain a satisficing solution for a decision maker from among a set of newly defined Pareto optimal solutions. It is shown that an optimal solution of the problem to be solved iteratively in the interactive algorithm is analytically obtained by a combination of the bisection method and the simplex method.     

Nonlinear adaptive control system design and experiment for a 3-DOF model helicopter

This paper deals with model following control of a model helicopter with three degree-of-freedom. Since the decoupling matrix is singular, a nonlinear structure algorithm is used to design the controller. Furthermore, since the model dynamics are described linearly by unknown system parameters, a well-known parameter estimation technique is introduced. The integral type of estimation model is proposed here since the use of the derivative type of model cannot obtain the desired estimation result. The experimental results show the effectiveness of the proposed method. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Inchworm robot grippers for clothes manipulation

Manipulating deformable objects like clothes, plastic, and paper by a robot is very challenging. This paper focuses on clothes manipulation as an example. A tracing manipulation method is used here to find a corner of the clothes. In this paper, tracing refers to tracing the clothes’ edge, with the robot’s movement based on feedback from sensors. One difficulty during this edge tracing is to make the robot trace smoothly and speedily without dropping the clothes in the process. This is due to the fact that deformable objects are sensitive to contact forces. A solution to this problem is to design a special robot gripper that can trace the clothes without having to worry about the clothes slipping away. In this paper, the development of inchworm-type grippers is proposed. Two sets of grippers inside a robot hand will allow the robot to trace the clothes more freely because there will always be a gripper firmly holding the clothes at any time. A unique tracing method for towel spreading using the inchworm grippers is also discussed. Experimental results have demonstrated the effectiveness of both the proposed grippers and also the algorithm. This work was presented in part at the 12th International Symposium on Artificial Life and Robotics, Oita, Japan, January 25–27, 2007