Hardware‐oriented ant colony optimization and its application to dynamic route guidance problem

Ant colony optimization (ACO) is based on the behavior of food gathering of ants and it is a powerful search tool particularly when applying it to combinatorial optimization problems. However, ACO has the inherent problem of substantial processing time, because it requires a lot of repetitive calculations. In this article, we propose novel hardware‐oriented ACO (H‐ACO) to reduce processing time. H‐ACO adopts new integer arithmetic instead of conventional floating point arithmetic in the optimization process and it achieves high‐speed processing while keeping the quality of solutions. In addition, H‐ACO reduces the hardware resources, accelerates the clock frequency, and improves the latency, if it is implemented as a dedicated hardware. Furthermore, we also propose a new route guidance algorithm which combines H‐ACO with Dijkstra's algorithm and it can be applied to a dynamic route guidance problem. Experiments using actual map data demonstrate the validity of the proposed route guidance algorithm. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Preparation and electrochemical properties of pure lithium cobalt oxide films by electron cyclotron resonance sputtering

Positive Li–Co–O films for all-solid-state thin-film lithium batteries were prepared by electron cyclotron resonance (ECR) sputtering using Li_xCoO₂ targets (x = 1.0, 1.2, 1.7 and 2.0). The Li–Co–O films prepared using the x = 1.0, 1.2 and 1.7 targets contained a Co₃O₄ impurity phase with high-temperature phase LiCoO₂. The film prepared using the x = 2.0 target was found to contain only a pure LiCoO₂ phase by Raman spectrometry and the inductively coupled plasma/atomic emission spectrometry (ICP/AES) method, and a thin-film battery using this film exhibited good electrochemical properties as a result of the improved utilization of the positive film.     

Performance evaluation of membrane on catalyst module for hydrogen production from natural gas

We have been developing a hydrogen production module with a Pd-based membrane on catalyst (MOC) from natural gas. The MOC module is expected to be more compact and cheaper than the conventional hydrogen production module. To evaluate the hydrogen production performance of the MOC module and to clear the factor that dominates the effective hydrogen production, we compared the reforming performance of the catalytic support without hydrogen permeable membrane and the MOC module at various reaction conditions. As a result, it was cleared that hydrogen permeation through the membrane improves the methane conversion drastically in the MOC module by comparing with the support only module and changing the experimental conditions.     

Characterization of electrical properties and photosensitivity of SnS thin films prepared by the electrochemical deposition method

Using the electrochemical deposition (ECD) method, we prepared tin sulfide thin films, which are suitable for the absorption layer in solar cells because of its bandgap energy (1 eV). We first optimized pulse-form biasing for ECD by characterizing deposited samples with scanning electron microscope, Auger electron spectroscopy and X-ray diffraction measurements. Then, we investigated the electrical properties of deposited SnS thin films and the properties of contacts with several different metals. Furthermore, we observed the photoconductivity of the films by means of photoelectrochemical measurements. From these results, we confirmed that the SnS thin films show p-type conduction.     

Epitaxial p-type SiC as a self-driven photocathode for water splitting

Solar-to-hydrogen conversion efficiencies of water-splitting photochathodes using epitaxially grown p-type 4H-, 6H- and 3C-SiC were estimated in a two-electrode system without applying any external bias. By using electrode materials with small oxygen overpotentials as counter electrodes, the photocurrent became comparable to that observed in a three-electrode system with a suitable bias. Estimated efficiencies seem to depend on the bandgap of the SiC polytypes. For the 3C-SiC, the obtained efficiency was 0.38%, which is so far the highest value reported for SiC. We confirmed that the hydrogen volumes estimated from the photocurrent were almost the same as actual volumes observed by gas chromatography.     

Performance of plastic gear made of carbon fiber reinforced poly-ether-ether-ketone

A carbon fiber (CF) reinforced poly-ether-ether-ketone (PEEK) gear was prepared by injection molding, and its gear performance was evaluated. It was found that the wear process of the CF reinforced PEEK gear significantly varied depending on the test conditions, such as the kind of the partner gear combined and whether a lubricant exists on the engagement region or not. It was assumed that the existence of transfer film at the engagement region, the affinity between PEEK and CF, the compression modulus as well as surface hardness of the partner gear, and the characteristics of CF play a role of differentiation in the wear depth.     

Microwave-assisted desulfurization of NOx storage-reduction catalyst

The activity of NO_x storage-reduction (NSR) catalysts is greatly reduced by sulfur poisoning, caused by the SO₂ present in the exhaust stream. Desorption of sulfur species from poisoned NSR catalysts occurs at temperatures in excess of 600 °C using reducing atmospheres and conventional heating. In this work, microwave (MW) heating has been used to promote desulfurization of poisoned NSR catalysts. The experiments were carried out by heating the catalyst with MW radiation and using hydrogen as the reducing gas. Desorption of H₂S at 200 °C was observed. Desorption at even lower temperatures (150 °C) was observed when water was introduced to the system. In the presence of water, sulfur species desorbed as both H₂S and SO₂. An overall reduction of sulfur species of about 60% was obtained. The use of MW heating proves to be an efficient way to achieve regeneration of poisoned NSR catalysts.     

Drying characteristics of porous material immersed in a bed of hygroscopic porous particles fluidized under reduced pressure

A relatively large wet material was immersed in a fluidized bed of hygroscopic porous particle (silica gel beads) under reduced pressure. And then the drying characteristics were compared with those in the case of inert particle (glass beads). The comparison of drying characteristics is performed experimentally and theoretically. In calculation, the water transfer from the sample to the fluidized bed was considered. The calculation results are in good agreement with the experimental data. The effects of the operational conditions (the pressure in the drying chamber and the temperature of the drying gas) on the drying characteristics were also examined in both fluidizing particles.The drying finishes earlier in the case of hygroscopic porous particle than in the case of inert particle regardless of pressure in the drying chamber, since the water transfer from the sample facilitates the drying in the case of hygroscopic porous particles. The temperature decrement in drying appears in the case of inert particle. This phenomenon is also observed in the case of hygroscopic porous particle, but the decrement degree of the temperature is much smaller than that in the case of inert particle. The difference of the minimum temperature in the sample in drying between the cases of hygroscopic porous particle and inert particle is very slight for different pressures in the drying chamber.     

Photocatalytic oxidation of CO with various oxidants by Mo oxide species highly dispersed on SiO2 at 293 K

The photocatalytic oxidation of CO into CO₂ with oxidants such as NO, N₂O and O₂ proceeded efficiently on a Mo/SiO₂ with high Mo dispersion under UV light irradiation. It was found that the reaction rate greatly depended on the kind and concentration of the oxidant. Photoluminescence investigations reveal the close relationship between the reaction rate and the relative concentration of the photo-excited Mo⁶⁺-oxide species, i.e. charge transfer–excited–triplet state (Mo⁵⁺–O⁻)^*, under steady-state reaction conditions. Moreover, the photocatalytic oxidation of CO with O₂ in excess H₂ was carried out to test suitability for applications to supplying pure H₂. This reaction was seen to proceed efficiently on Mo/SiO₂ with a high CO conversion of 100% and CO selectivity of 99% after 180 min under UV light irradiation, showing higher photocatalytic performance than TiO₂ (P-25) photocatalyst. UV–vis, XAFS, photoluminescence and FT-IR investigations revealed that the high reactivity of the charge transfer–excited–triplet state (Mo⁵⁺–O⁻)^*, with CO as well as the high reactivity of the photoreduced Mo-oxide species (Mo⁴⁺-species) with O₂ to produce the original Mo-oxide species (Mo⁶⁺O²⁻), played a crucial role in the reactions.     

Light Transmission by Lotus Plant Stem and Leaf Tissue: Natural Textiles for Optical Fibers

Application of plant stem for optical transmitting devices is considered. This research indicates a possibility of application of vascular bundles as natural textiles for optical fibers. Observations of lotus stem tissue were carried out. Laser beam transmission of lotus stem was confirmed. New functions of photoconduction through lotus stem and confinement of incident light on the leaf surface are discussed.