Effect of Phosphorus Ions on the Proton Conductivity in the Sol–Gel-Derived Porous Glasses

The effect of phosphorus ions on the proton conductivity was examined for the sol–gel-derived glasses. The porous glasses were prepared through hydrolysis of PO(OCH₃)₃ and Si(OC₂H₅)₄, in which the phosphorus ions consisted of the POH bonds and were dissolved into the silica matrix without any P-O-Si bond. The electrical conductivity increased in a humid atmosphere and reached ∼30 mS/cm at 50°C under 70% RH. High conductivity is achieved by both the POH bonds and the molecular water bonded to the POH bonds. The conductivity increased with a change in humidity from 40% to 80% RH. The phosphorus ions were selectively dissolved in water, resulting in a lower conductivity.     

Flow instability in capillary extrusion of plasticized poly(vinyl chloride)

Flow instability in a capillary extrusion is studied for a high molecular weight, plasticized poly(vinyl chloride) (PVC). The onset of melt fracture correlates with the long time relaxation ascribed to the generation and/or growth of PVC crystallites. An increase in the residence time in the cylinder leads to this long time relaxation and results in the melt fracture, although the apparent shear stress remains constant, irrespective of the residence time. The extrudate temperature and the species of the plasticizer also have a significant influence on the apparatus of the extruded products. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1277–1283, 2001     

Dielectric Depression and Dispersion in Electrophoretically Fabricated BaTiO3 Ceramic Films

Dielectric depression and dispersion were observed in BaTiO3 ceramic films fabricated by electrophoretic deposition followed by sintering. The dielectric constants were depressed down to 6800–4600 around the Curie point ( T _C ). The dielectric dispersion occurred above T _C . These dielectric properties are attributable to a surface layer formed during sintering. XRD analysis indicated that the surface layer was a hexagonal-like BaTiO₃ phase. A mixed solvent of acetylacetone and alcohol employed in the present work may have been responsible for the formation of the surface layer.     

不同的表面处理对针织碳纤维复合材料的影响分析(英文)

纤维复合材料已经研究了数十年了。他们有着比传统材料,如钢材,优秀的多的力学性能。然而,由于相对较低的产量,梭织、编织与其3D纤维结构的复合材料被认为较难大量生产。因此,近年来,针织物在复合材料界获得了较高的关注,它的高度可塑性使针织复合材料可以直接生产制造成各种复杂形状的复合材料如管状、圆锥型等,使得材料的浪费可以降到了最低。本文使用了有表面处理和没有表面处理的纬编平针碳纤维制成复合材料。对两种复合材料的经向和纬向分别做了拉伸试验。结果显示:有表面处理的材料具有更好的拉伸性能,尤其是在wale方向上,有表面处理的复合材料比没有表面处理的复合材料的拉伸强度提高75.68%。     

Synthetic Molecular Gear Based on Double-Decker Porphyrin Complexes

New rotary molecular machines (1 and 2) were synthetically constructed from two distinct porphyrin-based rotors, a cerium(IV) bis(porphyrinate)s double-decker (CeDD) and a porphyrinatorhodium(III)-based rotor. These rotors are adjacently mounted on rotational axes aligned to near vertical as resembling the bevel-gear-shaped structure. Structural study using NMR analysis reveals that these distinct rotors are connected through a coordination bond between rhodium(III) and a pyridyl group. At temperature from 193 to 393 K, each rotor represents rotational motion driven by heat fluctuation without decomposition into the corresponding precursors in dichloromethane-d ₂ and tetrachloroethane-d ₄. Importantly, the mechanical interaction between the teeth of these rotors is strongly dependent on the central metal atom in a DD rotor and the teeth structure in a porphyrinatorhodium(III)-based rotor. Understanding such relationship between the chemical structures and mechanical interaction is of importance for generating cooperative motion in the hybrid machinery system.     

Enhanced strain hardening in elongational viscosity for HDPE/crosslinked HDPE blend. I. Characteristics of crosslinked HDPE

Blending a crosslinked high‐density polyethylene (xHDPE) enhances melt strength and strain hardening behavior in elongational viscosity of high‐density polyethylene (HDPE) to a great degree. Gel fraction of xHDPE has a stronger effect on the strain hardening than sol fraction, although sol fraction also enhances the strain hardening to some degree. Further, the xHDPE crosslinked by peroxide in a compression mold exhibits more pronounced effect than xHDPE by radiation, which is attributed to the difference in the amount of the gel fraction. The xHDPE, which enhances the strain hardening, has sparse crosslink points in the network. Moreover, it was found from linear viscoelastic measurements, such as oscillatory modulus and relaxation modulus, that the xHDPE is characterized as a critical gel, which was also supported by the result of tensile testing. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 73–78, 2002     

Synthesis and electrode performance of layered nickel dioxide containing alkaline ions

Several polymorphs of layered nickel dioxide were prepared by using the chemical insertion of alkaline ions into Li_0.10NiO₂. We used aqueous AOH (A = Li, Na, K) solutions as reducing agents. Sodium and potassium insertion resulted in hydrated layered compounds that can be classified as γ-NiOOH with high crystallinity, while lithium insertion occurred without hydration. We discuss the coordination environment around the A⁺ ions for these inserted compounds. The thermal behavior, analyzed using high temperature (HT) X-ray diffraction (XRD) and thermogravimetric (TG) measurements, indicated that heating the hydrate at 150 °C yielded its dehydrate. The electrode performance of the nickelate was studied in lithium cells. We discuss the effect of interlayer water on cell rechargeability and the similarity between these nickelate and hydrated manganese dioxide (birnessite).     

Identification and Characterization of D‐Succinylase,and a Proposed Enzymatic Method for D‐Amino Acid Synthesis

Chiral amino acids are important intermediates for the pharmaceutical industry. We have developed a novel one‐pot enzymatic method for D ‐amino acid synthesis by the dynamic kinetic resolution of N‐succinyl‐dl ‐amino acids using D ‐succinylase (DSA) and N‐succinylamino acid racemase (NSAR, EC 4.2.1.113). The DSA from Cupriavidus sp. P4‐10‐C, which hydrolyzes N‐succinyl‐D ‐amino acids enantioselectively to their corresponding D ‐amino acids, was identified for the first time by screening soil microorganisms. Subsequently, the DSA gene was cloned and overexpressed in Escherichia coli. DSA was shown to comprise two subunits with molecular masses of 26 kDa and 60 kDa. Additionally, the NSAR gene from Geobacillus stearothermphilus NCA1503, which racemizes N‐succinylamino acids, was also cloned and overexpressed in E. coli. The highly purified DSA and NSAR prepared from each recombinant E. coli were characterized and used for D ‐amino acid synthesis. A one‐pot enzymatic method converted 100 mM N‐succinyl‐dl ‐phenylalanine to D ‐phenylalanine in 91.1% conversion with 86.7% ee. This novel enzymatic method may be useful for the industrial production of many D ‐amino acids.