Using MPC to control middle-vessel continuous distillation columns

The use of model predictive control (MPC) in middle-vessel continuous distillation column (MVCC) is discussed. It is shown that using a 5 × 5 MPC implementation (where all levels are included in MPC as integral process variables) allows using a smaller middle-vessel, particularly when disturbances can be measured: a good performance is ensured without having the middle vessel drained or overfilled. Also, it is shown that MPC practically circumvents the issue of tuning the middle-vessel level controller. Furthermore, the MVCC design makes conventional decentralised control perform comparably to MPC.     

Selective CO-oxidation over Ru-based catalysts in H2-rich gas for fuel cell applications

Topics in Catalysis - Ru-based catalysts supported on A zeolites and alumina were synthesised, characterised (XRD, SEM-EDS, TPR) and tested under realistic conditions for the preferential oxidation...     

Mn‐peroxidase production by Panus tigrinus CBS 577.79: response surface optimisation and bioreactor comparison

This study reports the statistical optimisation through response surface methodology of the growth medium for Panus tigrinus manganese‐dependent peroxidase (MnP) production in shaken culture. Three crucial variables, including carbon source, malonic acid and Mn²⁺, were optimised in a nitrogen‐limited medium. Sucrose was the best carbon source for MnP production. Mn²⁺ ions and malonic acid significantly stimulated MnP production at an optimal concentration of 53 mg dm^?3 and 8.2 mmol dm^?3, respectively, resulting in 0.83 U cm^?3. Further experiments were performed in lab‐scale stirred tank (STR) and bubble‐column (BCR) reactors using the previously optimised liquid medium. BCR proved to be more adequate than STR in supporting MnP production, leading to 3700 U dm^?3 after 144 h with a productivity of 25.7 U dm^?3 h^?1. On a comparative basis with other production data in lab‐scale reactors, these results appear to be compatible with scale transfer. Copyright © 2006 Society of Chemical Industry     

The influence of dietary lipid source on quality characteristics of raw and processed chicken meat

The influence of dietary lipid source [animal fats (AF) and vegetable oils (VO)] on quality characteristics of raw chicken meat (breast, thigh and meat batter) and cooked breaded patties prepared using a conventional technology (CT; forming, battering, breading, frying and convection cooking) or innovative technology (IT; forming, pre-dusting, steam cooking, battering and frying) was evaluated. Overall, dietary lipid source did not influence the chemical composition of raw meat while it modified its colour (L*, a*, b*). With respect to AF, VO produced higher breast and thigh meat cooking losses as well as a lower moisture and higher protein content of cooked breaded patties. VO also determined an increase of polyunsaturated-to-saturated fatty acid ratio of both raw and processed meat. Despite the different fatty acid profiles, the oxidative status of lipids was not affected by dietary lipid source and was acceptable in both raw meat and cooked patties as indicated by peroxide and thiobarbituric acid reactive substance values. As for the processing technology, IT determined a higher moisture and lower lipid content of the cooked breaded patties. Moreover, lipolysis degree was slightly higher in the products coming from IT. Finally, patties from AF group were lighter and more yellow than products belonging to VO group whereas IT led to lighter, less red and more yellow patties in comparison to CT.     

New photoactive oligo- and poly-alkylthiophenes

A new type of ω-methoxy-functionalized oligo-(OCT) and poly-(PQ) hexylthiophene characterized by a tetrameric repeating unit was synthesized and characterized. The configurational regularity and the mean degree of functionalization per thiophenic ring, lower than in commonly synthesized PATs, permitted the obtainment of more ordered chain conformations especially in the solid (film) state. Solar cells based on OCT and PQ films (as p-donor polymeric layer) mixed with Single-walled Carbon Nanotubes (SWCNTs, used as electron-acceptor system) were prepared and investigated. A power conversion efficiency of 0.52% with a fill factor of 0.42, an open-circuit voltage of 0.48 V and a short-circuit current of 1.93 mA/cm² under 70 mW/cm² white light illumination is reported for the polymeric sample. The obtained performance is comparable with that of devices made with regioregular P3HT but the easiness of the monomer synthesis and polymer preparation, giving OCT and PQ with good yields, as well as the enhanced workability and filmability of the latters from diluted solutions of common organic solvents together with their low sensitivity to the environmental conditions (air oxygen, moisture, temperature) makes the synthesized materials very promising for the set-up of polymer photovoltaic cells.     

TP-9201, a glycoprotein IIb/IIIa platelet receptor antagonist, prevents rethrombosis after successful arterial thrombolysis in the dog

BACKGROUND AND PURPOSE: We examined the ability of TP-9201, a platelet glycoprotein IIb/IIIa receptor antagonist, to prevent carotid artery rethrombosis in the anesthetized dog. METHODS: Occlusive thrombosis was induced by electrolytic injury of the left carotid artery. Thirty minutes later, 0.05 U/kg of anisoylated plasminogen streptokinase activator complex (APSAC) was infused locally to achieve clot lysis. Carotid artery recanalization was followed immediately by the infusion of either saline (10 mL/h, 240 minutes; n = 9), low-dose TP-9201 (120 micrograms/kg plus 3 micrograms.kg-1.min-1, 240 minutes; n = 7), or high-dose TP-9201 (185 micrograms/kg plus 5 micrograms.kg-1.min-1, 240 minutes; n = 7). Ex vivo platelet aggregation responses to ADP or arachidonic acid were determined. RESULTS: TP-9201 produced complete inhibition of platelet aggregation in citrated platelet-rich plasma but a partial and dose-dependent inhibition in heparinized platelet-rich plasma. A twofold and eightfold increase in the template bleeding time was associated with the infusion of low-dose and high-dose TP-9201, respectively. There were frequent cyclic flow reductions in both the saline and low-dose TP-9201-treated groups after thrombolysis. However, the high-dose TP-9201-treated group exhibited a sustained flow with minimal evidence of cyclic flow reductions. At the conclusion of the protocol, patent vessels were found more frequently in the high-dose TP-9201 (5/7; P = .0048) than in the low-dose TP-9201 treatment group (2/7; P = .17) when compared with the saline group (0/9). Infusion of high-dose TP-9201 was associated with a significant reduction in the thrombus mass as compared with the control vessels. CONCLUSIONS: Administration of TP-9201 in conjunction with successful thrombolysis inhibited ex vivo platelet aggregation and prevented rethrombosis of the canine carotid artery. This study demonstrates that TP-9201, an inhibitor of the platelet GPIIb/IIIa receptor, can inhibit platelet-vessel wall interaction and thus prevent rethrombosis.     

Advances in Lee–Schetzen Method for Volterra Filter Identification

This paper concerns the identification of nonlinear discrete causal systems that can be approximated with the Wiener–Volterra series. Some advances in the efficient use of Lee–Schetzen (L–S) method are presented, which make practical the estimate of long memory and high order models. Major problems in L–S method occur in the identification of diagonal kernel elements. Two approaches have been considered: approximation of gridded data, with interpolation or smoothing, and improved techniques for diagonal elements estimation. A comparison of diagonal elements estimated, with different methods has been shown with extended tests on fifth order Volterra systems.First Online Version Published in July, 2005     

On learning vector-valued functions

In this letter, we provide a study of learning in a Hilbert space of vectorvalued functions. We motivate the need for extending learning theory of scalar-valued functions by practical considerations and establish some basic results for learning vector-valued functions that should prove useful in applications. Specifically, we allow an output space Y to be a Hilbert space, and we consider a reproducing kernel Hilbert space of functions whose values lie in Y. In this setting, we derive the form of the minimal norm interpolant to a finite set of data and apply it to study some regularization functionals that are important in learning theory. We consider specific examples of such functionals corresponding to multiple-output regularization networks and support vector machines, for both regression and classification. Finally, we provide classes of operator-valued kernels of the dot product and translation-invariant type.     

Robots in a domestic setting: a psychological approach

The study presented in this paper aims at improving the current understanding of human-robot interaction by adopting a psychological approach. The acceptability of robotic devices in home settings, especially by elderly people, does not depend only on the practical benefits they can provide, but on complex relationships between the cognitive, affective and emotional components of peoples images of robots. This study has investigated the main dimensions of these representations, by comparing the attitudes towards technology in general, and domestic robots in particular, held by people at different stages of the lifespan. The results confirm that age is a critical variable.