Multi-sink load balanced forwarding with a multi-criteria fuzzy sink selection for video sensor networks

Congestion is a challenging problem in wireless sensor networks, which exacerbates with the high volume of data traffic imposed by video applications such as video surveillance and target tracking. Deployment of multiple sinks is a candidate solution for congestion and is also promising in terms of reliability and energy-efficiency. In order to gain the maximum benefit from multiple sinks, it is essential to distribute the load among them evenly. In this paper, we propose a cross layer geographic forwarding scheme MLBRF (Multi-Sink Load Balanced Reliable Forwarding) which aims to provide reliable and energy efficient video delivery in a multi-sinked sensor network for target tracking. In order to provide load balancing among the sinks, MLBRF proposes a sink selection mechanism based on fuzzy logic for the frame forwarding which evaluates the traffic density in the direction of each sink by combining two dynamic criteria which are the number of contenders and the buffer occupancy levels in the neighborhood with the static distance criterion. The performance of the fuzzy sink selection mechanism is compared using simulation with various sink selection mechanisms. The results show that MLBRF gains the maximum benefit from deploying multiple sinks in terms of reliability, latency and energy efficiency by using the proposed fuzzy sink selection mechanism.     

A novel method for determining effects of fire damage on the safety of the Type I pressure hydrogen storage tanks

Consumption of the fossil fuels causes greenhouse gas effect and environmental pollution, which are two basic problems of our age. As a result of this problem, clean and renewable alternative energy sources are beginning to replace fossil fuels. Nowadays, the use of hydrogen energy, which is one of the clean energy, is increasing in transportation and industrial areas. Increasing of hydrogen energy usage, scientists are attempting to solve the many safety problems (such as fire, burst, impact and hydrogen embrittlement) that can occur during the storage and consumption of hydrogen energy. In this study, during the event of fire, the safety of metallic Type I pressure hydrogen storage tanks is investigated by using a novel approach. In this new approach, the mechanical strength drops of the tank materials that is related with temperature rising are added to the safety calculations. In the study, 6061 T6 aluminum and SS 316L stainless steel alloys were used as hydrogen tank material. The safety of hydrogen tanks modelled using these alloys was investigated under different temperature conditions (22, 100, 200 and 300 °C) and internal pressure (15, 20 and 25 MPa).     

Graft copolymers from commercial chlorinated polypropylene via Cu(0)‐mediated atom transfer radical polymerization

Commercially available chlorinated polypropylene has been used as a macroinitiator for the Cu(0)‐mediated atom transfer radical polymerization of methyl methacrylate and tert‐butyl acrylate to obtain well‐defined graft copolymers. The relatively narrow molecular weight distribution in the graft copolymers and linear kinetic plots indicated the controlled nature of the copolymerization reactions. Both Fourier transform infrared and ¹H NMR studies confirmed that the graft reactions had taken place successfully. After graft copolymer formation, tert‐butyl groups of poly(tert‐butyl acrylate) side chains were completely converted into poly(acrylic acid) chains to afford corresponding amphiphilic graft copolymers. © 2016 Society of Chemical Industry     

Using Circular Conduits in Ozone Injection

Dissolved oxygen is the amount of oxygen dissolved in water corresponding to an important water quality parameter in rivers, streams, and lakes. Hydraulic structures can increase dissolved oxygen levels by creating turbulent conditions where small air bubbles are carried into the bulk of the flow. A gated conduit is a hydraulic structure that can be used efficiently in aeration and oxygen transfer. The subatmospheric pressure between the upstream and downstream of the gate is the reason for the air injection. Ozone is an unstable gas comprised of three oxygen atoms, and it can be used for water treatment. Ozone is thermodynamically unstable and spontaneously reverts back into oxygen. Ozone has been widely accepted as an effective disinfectant and a chemical oxidant. In this study a series of experiments was conducted to determine the ozone injection performance of circular conduits. Results showed that circular conduits are very effective for ozone injection.     

An eco-friendly process: Predictive modelling of copper adsorption from aqueous solution on Spirulina platensis

The adsorption of copper ions on Spirulina platensis was studied as a function of contact time, initial metal ion concentration, and initial pH regimes. Characterization of this adsorbent was confirmed by FTIR spectrum. Modified Gompertz and Logistic models have not been previously applied for the adsorption of copper. Logistic was the best model to describe experimental kinetic data. This adsorption could be explained by the intra-particle diffusion, which was composed of more than one sorption processes. Langmuir, Freundlich, and Redlich–Peterson were fitted to equilibrium data models. According to values of error functions and correlation coefficient, the Langmuir and Redlich–Peterson models were more appropriate to describe the adsorption of copper ions on S. platensis. The monolayer maximum adsorption capacity of copper ions was determined as 67.93 mg g^?1. Results indicated that this adsorbent had a great potential for removing of copper as an eco-friendly process.     

Photoinduced electron transfer mechanism between green fluorescent protein molecules and metal oxide nanoparticles

Green fluorescent protein (GFP) molecules are attached to titanium dioxide and cadmium oxide nanoparticles via sol–gel method and fluorescence dynamics of such a protein–metal oxide assembly is investigated with a conventional time correlated single photon counting technique. As compared to free fluorescent protein molecules, time-resolved experiments show that the fluorescence lifetime of GFP molecules bound to these metal oxide nanoparticles gets shortened dramatically. Such a decrease in the lifetime is measured to be 22 and 43 percent for cadmium oxide and titanium dioxide respectively, which is due to photoinduced electron transfer mechanism caused by the interaction of GFP molecules (donor) and metal oxide nanoparticles (acceptor). Our results yield electron transfer rates of 3.139×10⁸ s⁻¹ and 1.182×10⁸ s⁻¹ from the GFP molecules to titanium dioxide and cadmium oxide nanoparticles, respectively. The electron transfer rates show a marked decrease with increasing driving force energy. This effect represents a clear example of the Marcus inverted region electron transfer process.     

Neural extension of experimental data to investigate using phosphogypsume in light brick production

In this study, usability of wastes produced in phosphoric acid plants in structural brick manufacture has been investigated. There are several parameters involved in using these wastes in brick production namely the rate of added waste, firing speed and firing temperature. The performance of these parameters can be measured by several criteria such as natural drying shortening, water absorption and weight loss. Therefore, so many experiments are needed to investigate the effects of these parameters on the bricks produced with these wastes. The result of a series of experiments were utilized to achieve this end. The results have shown that the industrial wastes considered improve the performance of the bricks in terms of the criteria mentioned above. However, the results have also shown that further investigations are needed to explore the effects of interim values on the performance of the bricks. To achieve that end, a neural experimental study is adopted. For this purpose, the results of the experiments conducted were used to construct an artificial neural network. The trained and tested network was then used to check the effects of 280 different combinations for each type of material mixtures mentioned. The outcome of these artificial tests have provided the optimal values for the waste addition rate, firing speed and firing temperature based on the four criteria mentioned previously.     

Lateral stiffness of steel plate shear wall systems

The accuracy of the finite element method and strip method of analysis for calculating the lateral stiffness of steel plate shear wall (SPSW) systems is assessed by making comparisons with experimental findings. Comparisons revealed that while both methods provide acceptable accuracy, they also require the generation of sophisticated computer models. In this paper, two alternative methods are developed. The first one is an approximate hand method based on the deep beam theory. The classical deep beam theory is modified in the light of parametric studies performed on restrained thin plates under pure shear and pure bending. The second one is a computer method based on the truss analogy. Stiffness predictions using the two alternative methods are found to compare well with the experimental findings. In addition, lateral stiffness predictions of the alternate methods are compared against the solutions provided using finite element and strip methods of analysis for a class of test structures. These comparisons reveal that the developed methods provide estimates with acceptable accuracy and are simpler than the traditional analysis techniques.     

Compensating the effects of DC bias lines on terahertz photomixer antennas using resistively loaded lines

This paper proposed a method, namely resistively loaded lines (RLL), to compensate the effects of the DC bias lines after investigating its effects on several types of antennas for terahertz photomixers. The RLL is formed by placing lumped resistances periodically on the DC bias line in order to cease the leakage current virtually, which cause a significant amount of distortion on the antenna performance. The simulation results of the dipole, folded dipole, log-periodic, and spiral antennas show that RLL almost removes the effects of the bias lines and improves the antenna radiation resistance and radiation pattern notably compared with that of the commonly used bias line types, such as coplanar stripline and photonic bandgap type bias lines.