Work-hardening and recovery mechanisms in gamma-based titanium aluminides

The work-hardening mechanisms in two-phase γ-titanium aluminide alloys were characterized in terms of the glide obstacles determining the velocity and slip path of dislocations, utilizing transmission electron microscopy (TEM) observations and thermodynamic-glide parameters. There was clear evidence that short-range obstacles in the form of dislocation debris and dipoles were produced during plastic deformation at room temperature. These dislocation obstacles contributed significantly to work hardening. The observed strong strain hardening arose from long-range elastic dislocation interactions and the production of dipole and debris defects. The thermal stability of these deformation-induced defects was assessed by isothermal and isochronal annealing. The results indicated that the dipole and debris defects were relatively unstable upon annealing at moderately high temperatures, which led to significant recovery of work hardening. This article is based on a presentation made in the symposium entitled “Fundamentals of Structural Intermetallics,” presented at the 2002 TMS Annual Meeting, February 21–27, 2002, in Seattle, Washington, under the auspices of the ASM and TMS Joint Committee on Mechanical Behavior of Materials.     

Behaviour of ±45° glass/epoxy filament wound composite tubes under quasi-static equal biaxial tension–compression loading: experimental results

The primary aim of this paper is to present results describing in detail the behaviour of ±45° E-glass/MY750 (GRP) tubes, of various wall thicknesses, subjected to equal biaxial tension–compression loading, generated under combined internal pressure and axial compression. The role played by the non-linear lamina shear has also been assessed by comparing various shear stress–strain curves for embedded laminae (extracted from tests on ±45° tubes subjected to circumferential: axial stress ratios SR=1:0, 1:−1 and 2.3:−1) with that of an ‘isolated’ lamina (measured from torsion of 90° tubes). Extracted shear failure strains, for embedded laminae, were more than four fold larger than those measured at ultimate failure for an ‘isolated’ lamina. Soft characteristics were observed in the embedded lamina and these were believed to be due to interaction between early matrix damage initiation (and propagation) and shear. Factors affecting the behaviour of the tubes, such as bulging, scissoring, thermal stresses and stress variation through the thickness are discussed.     

An alcohol expectancy-challenge prevention program for at risk college women.

Alcohol expectancy-challenge programs are effective in changing expectancies and reducing drinking in college men (J. Darker & M. S. Goldman. 1993. 1998); however, recent evidence suggests this protocol might not be effective for women (M. E. Dunn, C. Lau, & I. Y. Cruz, 2000). This study was designed to reevaluate the effectiveness of a social/sexual expectancy-challenge intervention in college women reporting moderate to heavy alcohol use. Forty-six undergraduate women were randomly assigned to the prevention or control condition. Participants reported alcohol expectancies at pre- and posttest and monitored their drinking patterns daily for 6 weeks. The program was effective in changing some expectancies but did not reduce drinking. This further confirms differences in the mechanisms by which expectancy-challenge programs function for men and women. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Compositions of Co – Cr – Mo Alloys Examined by Glow-Discharge Mass Spectrometry

A method has been developed for the quantitative elemental analysis of Co – Cr – Mo alloys which are used for making surgical implants, and which is done by glow-discharge mass spectrometry. There is a discussion of the effects of molecular ions and an estimate is made of the sensitivity limits in the detection of traces of toxic elements. A method has been devised for calculating the concentrations of molecular ions that increases the analysis reliability. It is shown that raising the argon pressure and discharge current substantially reduces the relative concentrations of molecular ions and allows one to raise the analysis sensitivity.     

Turning software into a service

The software as a service model composes services dynamically, as needed, by binding several lower-level services-thus overcoming many limitations that constrain traditional software use, deployment, and evolution.     

Allocation of Scarce Water Resources Using Deficit Irrigation in Rotational Systems

On irrigation schemes with rotational irrigation systems in semiarid tropics, the existing rules for water allocation are based on applying a fixed depth of water with every irrigation irrespective of the crops, their growth stages, and soils on which these crops are grown. However, when water resources are scarce, it is necessary to allocate water optimally to different crops grown in the irrigation scheme taking account of different soils in the command area. Allocating water optimally may lead to applying less water to crops than is needed to obtain the maximum yield. In this paper, a three stage approach is proposed for allocating water from a reservoir optimally based on a deficit irrigation approach, using a simulation-optimization model. The allocation results with a deficit irrigation approach are compared for a single crop (wheat) in an irrigation scheme in India, first with full irrigation (irrigation to fill the root zone to field capacity) and second with the existing rule. The full irrigation with a small irrigation interval was equivalent to adequate irrigation (no stress to the crop). It is found that practicing deficit irrigation enables the irrigated area and the total crop production in the irrigation scheme used for the case study to be increased by about 30–45% and 20–40%, respectively, over the existing rule and by 50 and 45%, respectively, over the adequate irrigation. Allocation of resources also varied with soil types.     

Atomic hydrogen flux density measured using thin metal films

Using one-or two-layer films of transition metals, it is possible to determine the atomic hydrogen flux density under reduced gas pressure conditions (10⁻¹–10⁻³ Pa). The method consists in monitoring a change in the film resistance caused by selective dissolution of atomic hydrogen in the metal during exposure of the film in a mixed atomic-molecular flow, followed by determining a characteristic time τ required for the hydrogen concentration in the film to reach 63% of the maximum possible level. The hydrogen flux density is then calculated within the framework of a simple mathematical model of the film saturation with hydrogen described by a relaxation law. The proposed method is characterized by a high selective sensitivity to atomic hydrogen. The atomic hydrogen flux density in a mixed atomic-molecular flow can be determined in a range from 5×10¹³ to 10¹⁶ cm⁻² s⁻¹.     

Deposition and Properties of Superconducting MgB2 Thin Films

The recently discovered superconductor MgB₂ with T _c at 39 K has great potential in superconducting electronics. In this paper, we review the deposition techniques used for MgB₂ thin films in the light of a thermodynamic study of the Mg-B system with the calculation of phase diagrams (CALPHAD) modeling technique. This thermodynamic study identifies a growth window in the pressure–temperature phase diagram, in which the magnesium pressure is very high for likely in situ growth temperatures. A Hybrid Physical–Chemical Vapor Deposition (HPCVD) technique that successfully achieves such a high Mg pressure is shown to produce in situ epitaxial MgB₂ thin films with bulk superconducting properties.     

Interstate forensic psychology consultations: A call for reform and proposal of a model rule.

Forensic psychology has made important gains in professional recognition and stature in the courts, resulting in increasing demands for mobility of expertise. Current regulations regarding the interjurisdictional temporary forensic practice of psychology, however, are characterized by variability of regulations, ambiguity and inaccessibility, and continuing total barriers. A uniform, well-reasoned policy is needed. A conceptual basis for such a policy is provided by a discussion of licensing rationales and the application of these to forensic practice. Uniformity, public and professional protection, and practicability are identified as fundamental regulatory criteria. A Model Rule Regarding the Temporary Forensic Practice of Psychology is proposed for adoption by state licensing boards on a nationwide basis. (PsycINFO Database Record (c) 2010 APA, all rights reserved)