Preparation of N‐doped graphene powders by cyclic voltammetry and a potential application of them: Anode materials of Li‐ion batteries

Nowadays, doped graphenes are attracting much interest in the field of Li‐ion batteries since it shows higher specific capacity than widely used graphite. However, synthesis methods of doped graphenes have secondary processes that requires much energy. In this study, in situ synthesis of N‐doped graphene powders by using of cyclic voltammetric method from starting a graphite rod in nitric acid solution has been discussed for the first time in the literature. The N‐including functional groups such as nitro groups, pyrrolic N, and pyridinic N have been selectively prepared as changing scanned potential ranges in cyclic voltammetry. The electrochemical performance as anode material in Li‐ion batteries has also been covered within this study. N‐doped graphene powders have been characterized by electrochemical, spectroscopic, and microscopic methods. According to the X‐ray photoelectron spectroscopy and Raman results, N‐doped graphene powders have approximately 16 to 18 graphene rings in their main structure. The electrochemical analysis of graphene powders synthesized at different potential ranges showed that the highest capacity was obtained 438 mAh/g after 10 cycles by using current density of 50 mA/g at N‐GP4. Furthermore, the sample having higher defect size shows better specific capacity. However, the more stable structure due to oxygen content and less defect size improves the rate capabilities, and thus, the results obtained at high current density indicated that the remaining capacity of N‐GP1 was higher than the others.     

The oxidative and lipolytic stability of Yayık butter produced from different species of mammals milk (cow,sheep, goat) yoghurt

Yay?k butter, made from yoghurt, is one of the traditional dairy products in Anatolia In this study, some properties of Yay?k butter produced from cow, sheep, and goat yoghurts have been observed during 30 days of storage at 4–5 °C. In this purpose yoghurts were produced from different species milks then these yoghurts were used as a raw material for production of Yay?k butters samples. On the first day of the storage, differences in pH of serum among the butter produced from different mammals were statistically significant. The highest value of lactic acid was measured in the sample of sheep butter (SB). The level of lactic acid in Yay?k butters was significantly different. Goat butter (GB) had weaker oxidative stability and significantly higher peroxide value than those of other samples. The highest accumulation of the free fatty acids has been detected in sample GB. All samples of Yay?k butter received almost the same score on the first day of the storage, but on day 30 some flavour defects in sample GB were noted by the panelists.     

Biodiversity and technological properties of yeasts from Turkish sourdough

Food Science and Biotechnology - In this study, yeasts were isolated and characterized from twelve traditional sourdough samples which belongs to Black Sea and Aegean regions of Turkey. Twenty six...     

Exergetic analysis of an LPG evaporator/regulator with thermal storage

In this study, the efficiency of an LPG evaporator/regulator (E/R) is investigated on both energy and exergy concept. The E/R, which is a key part of LPG conversion systems that enables gasoline engines to be operated on LPG when desired, has been transformed to a thermal energy storage (TES) system using an adequate amount of phase change material (PCM) to be able to store waste energy of the engine coolant, so that the engine can be operated on LPG rather than gasoline even at cold start to decrease fuel consumption and exhaust emissions. The engine has been tested at idle speed at 4 °C environment temperature. The PCM application provided the engine to be operated on LPG at cold start and increased the efficiency of the E/R in a considerable extent on both energy and exergy bases. It was observed that using PCM in the E/R for thermal storage, the net efficiency differences of the E/R with PCM application reach to the values of 20% and 10%, respectively for the energy and exergy calculations. The net 2nd law efficiencies were lower than the ones that of 1st law with the values of about 11% for gasoline operation, and 8% for LPG operation of the engine.     

The effects of maturation on early and late phases of phrenic neurogram during eupnea

In this paper, we investigate the effects of maturation on the early and late phases of the phrenic neurogram. We have used the matching pursuit (MP) method to examine the effects of maturation on breathing patterns in both time and frequency domains. The MP was chosen since the wavelet transform method may not represent signals whose Fourier transforms have a narrow high-frequency support. The phrenic neurogram was recorded from 25 piglets (3-35 days) during eupnea (normal breathing) at three postnatal age groups: young (3-7 days (n = 9)), (middle) 10-21 days (n = 6), and old (29-35 days (n = 10)). The energy percentage of atoms representing the nonperiodic neural activities (NPNAs) significantly decreased from young age to middle age groups (p<0.01) and from young age to old age groups (p<0.01), and from middle age to old age groups (p<0.055) in the early phase (the first half) of the phrenic neurogram, but these changes were not statistically significant in the late phase (the second half) of the phrenic neurogram as maturation proceeded. However, the energy percentage of atoms representing the periodic neural activities (PNAs) decreased with maturation, but these changes were not statistically significant in the early phase of the phrenic neurogram. The energy percentage of (PNAs) increased in the late phase of the phrenic neurogram as maturation proceeded although these changes were only significant between young and old age groups (p<0.01). These results suggest that the significant decrease of the NPNAs in the early phase and the increase in the late phase of the phrenic neurogram could be a sign of maturation in piglets.     

Characterization and corrosion behavior of ceramic coating on magnesium by micro-arc oxidation

In this study, the commercial pure magnesium was coated in different aqueous solutions of Na₂SiO₃ and Na₃PO₄ by the micro-arc oxidation method (MAO). Coating thickness, phase composition, surface and cross sectional morphology and corrosion resistance of coatings were analyzed by eddy current method, X-ray diffraction (XRD), scanning electron microscope (SEM) and tafel extrapolation method, respectively. The average thickness of the coatings ranged from 52 to 74 μm for sodium silicate solution and from 64 to 88 μm for sodium phosphate solution. The dominant phases on the coatings were detected as spinal Mg₂SiO₄ (Forsterite) and MgO (Periclase) for sodium silicate solution and Mg₃(PO₄)₂ (Farringtonite) and MgO (Periclase) for sodium phosphate solution. SEM images reveal that the coating is composed of two layers as of a porous outer layer and a dense inner layer. The corrosion results show the coating consisting Mg₂SiO₄ is more resistant to corrosion than that containing Mg₃(PO₄)₂.     

Synthesis and characterization of poly(N-(2-(thiophen-3-yl)methylcarbonyloxyethyl)maleimide) and its spectroelectrochemical properties

A new monomer; N-(2-(thiophen-3-yl)methylcarbonyloxyethyl) maleimide (NMT) was synthesized. The chemical structure of the monomer was characterized by Nuclear Magnetic Resonance (¹H-NMR) and Fourier Transform Infrared (FTIR) Spectroscopy. Electrochemical polymerization of NMT was performed in acetonitrile (AN)/borontrifloride ethylether (BFEE) solvent mixture (1:1, v/v) where tetrabutylammonium tetrafluoroborate (TBAFB) was utilized as the supporting electrolyte. The resulting conducting polymer was characterized by Fourier Transform Infrared (FTIR) Spectroscopy, thermal analyses and Scanning Electron Microscopy (SEM). Electrical conductivity was measured by the four-probe technique. The spectroelectrochemical behavior and switching ability of P(NMT) film were investigated by UV–Vis spectrophotometry. P(NMT) revealed color changes between yellow and blue in the reduced and oxidized states respectively.     

Optimum design of slurry pipelines by genetic algorithm

Various applications of slurry transportation through pipelines exist. A transportation problem is formulated to determine the pipe diameters and amounts of transported slurry from the production to the consumption points. The minimisation of the cost consisting of the pipe and energy cost terms is considered as the objective function. Pipe cost is given as the function of pipe diameters and the energy cost is defined as the function of pipe diameters and slurry amounts. Energy cost is obtained by using the relation that is previously determined after the experimental studies have been made for the magnetite ore. Genetic algorithm is used as the optimisation method and to apply this method a commercially available software written in the C language is used and modified. The proposed methodology to solve this non-linear programming problem is applied to a transportation system and it is found that the proposed methodology has made the complex, labour-intensive solution process very convenient for the users.