Finishing works after welding of structures made of rust-resistant,high-alloy steels

In this paper, problems that occur when working with welds formed of high-alloy steels to restore their passive layers, damaged as a result of temperature impact, are discussed. Particular attention was paid to the procedures concerning aggressive etching agents during and after completion of the passivation processes (waste neutralization and utilization).     

Stem Photosynthesis—A Key Element of Grass Pea (Lathyrus sativus L.) Acclimatisation to Salinity

Grass pea (Lathyrus sativus) is a leguminous plant of outstanding tolerance to abiotic stress. The aim of the presented study was to describe the mechanism of grass pea (Lathyrus sativus L.) photosynthetic apparatus acclimatisation strategies to salinity stress. The seedlings were cultivated in a hydroponic system in media containing various concentrations of NaCl (0, 50, and 100 mM), imitating none, moderate, and severe salinity, respectively, for three weeks. In order to characterise the function and structure of the photosynthetic apparatus, Chl a fluorescence, gas exchange measurements, proteome analysis, and Fourier-transform infrared spectroscopy (FT-IR) analysis were done inter alia. Significant differences in the response of the leaf and stem photosynthetic apparatus to severe salt stress were observed. Leaves became the place of harmful ion (Na⁺) accumulation, and the efficiency of their carboxylation decreased sharply. In turn, in stems, the reconstruction of the photosynthetic apparatus (antenna and photosystem complexes) activated alternative electron transport pathways, leading to effective ATP synthesis, which is required for the efficient translocation of Na⁺ to leaves. These changes enabled efficient stem carboxylation and made them the main source of assimilates. The observed changes indicate the high plasticity of grass pea photosynthetic apparatus, providing an effective mechanism of tolerance to salinity stress.     

Luminescent Amphiphilic Aminoglycoside Probes to Study Transfection

We report the characterization of amphiphilic aminoglycoside conjugates containing luminophores with aggregation-induced emission properties as transfection reagents. These inherently luminescent transfection vectors are capable of binding plasmid DNA through electrostatic interactions; this binding results in an emission “on” signal due to restriction of intramolecular motion of the luminophore core. The luminescent cationic amphiphiles effectively transferred plasmid DNA into mammalian cells (HeLa, HEK 293T), as proven by expression of a red fluorescent protein marker. The morphologies of the aggregates were investigated by microscopy as well as ζ-potential and dynamic light-scattering measurements. The transfection efficiencies using luminescent cationic amphiphiles were similar to that of the gold-standard transfection reagent Lipofectamine® 2000.     

Influence of apple purée preparation and storage on polyphenol contents and antioxidant activity

The polyphenolic components of Idared and Shampion apple purées were determined by HPLC; chlorogenic acid was the most abundant acid (20.0 mg/100 g in microwaved Idared); other polyphenols identified in high concentrations included (−)-epicatechin, procyanidin B1 and B2; quercetin and cyanidin glycosides were found in minor concentrations. The Shampion purées had higher total phenolics (142 mg/100 g) and procyanidin B2 concentrations (17.3 mg/100 g) than the Idared ones, and polymeric procyanidins represented 41% of all polyphenols. Antioxidant capacities of the samples, determined by spectrophotometric methods and EPR spectroscopy, correlated well with the concentration of polyphenols. The antioxidant properties could be better represented by EPR than by UV–vis measurements. The latter require transparent (clear) samples whereas EPR can be a method of choice in the assessment of radical-scavenging activity of dense and cloudy apple purées. Our results support the putative high antioxidant value of apple purées and define their capacity in terms of the major constituents. Apple purées are a rich source of natural antioxidants, especially of chlorogenic acid and procyanidins.     

Interactive software for estimating the efficacy of non-isothermal heat preservation processes

The most commonly used methods to generate microbial inactivation curves are based on the assumptions that microbial mortality follows first order kinetics and that the temperature effect on the 'D value' or exponential rate constant is determined by the log linear model or the Arrhenius equation, respectively. However, many bacterial cells and spores follow the Weibull-Log Logistic (WeLL) model and software to simulate pasteurization and sterilization processes using this model has been available for some years as free downloadable programs written in MS Excel. According to this model, an organism's heat resistance parameters are T(c), a marker of the temperature level where the inactivation accelerates, k, the steepness of the Weibullian rate parameter in the lethal regime where T>T(c) and n, a measure of the semi logarithmic isothermal survival curve's concavity and its direction. Because the traditional first order kinetics is just a special case of the Weibullian model with n=1.0, the software is applicable to both linear and non-linear inactivation. Recently, Wolfram Research Inc., the maker of Mathematica, has made its interactive program Mathematica Player free downloadable software. A user, who need not have a copy of Mathematica, can view and download any of the numerous graphic demonstrations from the Wolfram Demonstrations Project web site, and continuously manipulate their dynamic parameters with sliders on the screen. One set of five such demonstrations allows the user to generate and adjust the temperature profile of heat processes, modify the targeted organism's Weibullian survival parameters and immediately observe the corresponding semi-logarithmic survival curve and the equivalent time at a reference temperature, which can also be manipulated by a slider. This free program enables food microbiologists, technologists and engineers to examine a large number of heat processing options and assess their potential safety implications. It can also serve as a training and educational tool in industry and academia.     

Water Balance of the Upper Jordan River Basin

Sharing water in the Jordan basin has been a key topic in the recent peace talks between Israel and its neighbors. Knowing the quantity of water available is a prerequisite to water sharing. Many different values have been published in recent years. Different sources report Jordan's discharge flow into Lake Kinneret anywhere from 460 to 800 Mm³/year. The aim of this article is to present a water balance for the Jordan basin for a 15-year period. The years 1977–1978 to 1991–1992 were studied for the basin's water budget, as they represent the present day (1998) land use. The results show that Lake Kinneret has a yearly average input (= output) of 770 Mm³. Israel uses some 800 Mcm³/year from the entire Jordan basin, of which 440 Mm³ is used within the basin and the rest outside. There is about 100 Mm³ for future utilization in the watershed. The yearly Jordan's discharge to the Dead Sea is 220–250 Mm³. Reporting by various secondary data sources is compared to primary data findings to illustrate the great variability of data reporting and to provide annual flow estimates, based largely on primary sources, for the Upper Jordan River.     

Expressing the equivalence of non‐isothermal and isothermal heat sterilization processes

Currently, the sterility of heat‐processed food and pharmaceuticals is assessed in terms of an F₀ value, based on the equivalence of the heat treatment to an isothermal process at a reference temperature. This F₀ value, however, has a meaning if, and only if, the inactivation kinetics of the targeted spores (or cells) follow a first‐order relationship and the temperature dependence of the D value, the reciprocal of the rate constant, is log‐linear. There is growing evidence that these conditions are not satisfied by many spores, including those of Clostridium botulinum and vegetative cells. Consequently, a replacement for the F₀ value is proposed in the form of a momentary equivalent time at the reference temperature based on the actual survival pattern of the spores, which need not be log‐linear. This equivalent time can be calculated together with the theoretical survival ratio in real time, thus enabling an operator to monitor the lethality of ongoing industrial heat processes. The concept is demonstrated with published survival data of C. botulinum, for which the Weibullian and log‐logistic models served as primary and secondary models, respectively. The safety factor according to the proposed method is in the number of added minutes of processing, beyond the theoretical time needed to reduce the survival ratio of the targeted spores or cells to a level that would produce practical (or commercial) sterility. Copyright © 2006 Society of Chemical Industry     

Long-Term Changes in the Course of Ice Phenomena on the Oder River along the Polish–German Border

Ice phenomena are a major component of the hydrological regime of east-central and northern European rivers. However, their occurrence disturbs inland water transportation, particularly affecting the major rivers of the Central European Plain that are part of Europe’s international waterways. The Oder is one of these rivers, and is located on the boundary between the much warmer and the much colder part of the temperate climatic zone. This makes the course of ice phenomena on the river difficult to predict. The main purpose of this work is to document and analyse the dynamic of changes occurring for over 60 years (1956–2015) in the ice phenomena of a river that demonstrates a transitional ice regime. It was found that the duration of all ice phenomena decreased (by up to 0.58 days·year^?1) and so did the duration of ice cover (by up to 0.46 days·year^?1). The rates and trends of the two parameters were, however, different in different parts of the lower stretch of the river. This fact is especially important in the context of climate changes whose characteristics include an increased incidence of extreme weather situations, both meteorological and hydrological. There was also found to be a strong correlation (R² from 0.69 to 0.81) between the duration of ice phenomena and the mean air temperature in winter (December to February) and a much weaker correlation between the duration of ice phenomena and the NAO index (R² from 0.42 to 0.48). Such a little correlation of ice phenomena with NAO is likely to result from the pollution of the Oder River (in particular in the second half of the twentieth century) and icebreaking operations on the river.

     

Evaluation of the mechanical behavior of W7-X central support connections by means of semi-automated FE analysis

The stellarator Wendelstein 7-X is under construction at the Max-Planck-Institut für Plasmaphysik in Greifswald. Its superconducting coil system is fixed by a massive structure. During machine operation the coils exert high forces and moments against each other and the central support structure (CSS). Therefore, the detailed analysis of the coil to CSS connections, the so-called central support elements (CSE), is a critical item. The major details of the design have been frozen; nevertheless, there is still need for detailed analysis of the CSEs due to assembly issues, and later on for exploring operational limits of the machine. These analyses have to be performed quickly, reliably, and shall provide results in a standardized form to enable timely responses to the assembly team. Special numerical tools – finite element (FE) parametric models of CSEs – have been developed for the purpose of such analyses. In the models, the geometry, material properties, contact conditions, loads as well as results presentation are defined in a parametric way. The use of the developed models for the definition of the final weld parameters, bolt preloads, assessment of acceptable tolerances, and optimal positions of the CSE-wedges before welding is also discussed.     

XPS studies of perovskites surface instability caused by Ar+ ion and electron bombardment and metal deposition

X-ray Photoelectron Spectroscopy (XPS) was used to study the influence of low energy Ar⁺ ion bombardment, electron bombardment and Pt deposition on the SrTiO₃ (STO) single crystal electronic structure. Atomic composition changes were found and attributed to chemical reconstruction of the STO surface. A clear correlation between the presence of conducting, low Ti oxidation states in valence band and core level changes was detected. A strong effect caused by electron irradiation was ascribed to the electroreduction process. The influence of lanthanum doping on surface instability of STO was also discussed. The La doped sample (STO: 3,75% La) was found to be modified upon Pt metal deposition to a higher degree than pure STO crystal.