Interface between electroless amorphous Ni–Cu–P coatings and Al substrate

The initial phase arising at the interface with aluminum substrate during electroless deposition of amorphous high phosphorus (16–19 at.%) Ni–Cu–P alloy with alloyed copper 1.7–3.4 at.% is studied. Stripped deposit foils are inspected by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy coupled with energy dispersive X-ray analysis (TEM-EDX). Depending on the plating conditions, various particles, some of them crystalline, are revealed at the foils sides formerly adhering to the substrate. EDX analysis of the crystallites shows diverse copper contents of about 34–64 at.%, without any phosphorus. Electron diffraction analysis indicates a lattice structure very close to that of Cu. The presence of a phase without phosphorus and enriched in copper at the interface with the Al substrate is also confirmed by Auger electron spectroscopy. This initially arising crystalline phase might exert a limited effect on the main properties of bulk Ni–Cu–P deposits: the composition uniformity through the thickness, amorphous structure and paramagnetic behavior. A modification of the plating process is recommended, which is decreasing the probability of inhomogeneities formation.     

Prediction of Core Losses of Three-Phase Distribution Transformer

Transformers are normally designed and built for use at rated frequency and sinusoidal load current. A non-linear load on a transformer leads to harmonic power losses which cause increased operational costs and additional heating in transformer parts. It leads to higher losses, early fatigue of insulation, premature failure and reduction of the useful life of the transformer. To prevent these problems, the rated capacity of transformer which supplies harmonic loads must be reduced. In this work, a typical 50 kVA three-phase distribution transformer with real practical parameters is taken under non-linear loads generated due to domestic loads. The core losses is evaluated using the three dimensional model of the transformer developed in FEM （finite element method） program based on valid model of transformer under high harmonic conditions. And finally a relation associated with core losses and amplitude of high harmonic order are reviewed ＆ analyzed and then a comparison is being carried out on the results obtained by different excitation current in transformer windings.     

Using the spectral asymmetry of TEA CO2 laser pulses to determine the Doppler-shift sign in coherent lidars with low frequency stability

We develop a method for determinating the relative positions of the lidar transmitter (LT) and the local oscillator (LO) frequencies in Doppler CO(2) lidars. It uses the weak spectral asymmetry of TEA CO(2) laser pulses, defined by a number of secondary peaks at the high-frequency side of the main spectrum peak. Depending on the sign of the beat frequency, these peaks may appear in the demodulated spectrum at either the high- or the low-frequency side. Each laser pulse spectrum is compared with reference spectra with two types of asymmetry, with the cross-correlation coefficients used as criteria. The performance of the method at different values of signal-to-noise ratio is analyzed numerically. The method is also applied to raw data from the lidar reference channel and demonstrates good performance at noise levels lower than the secondary peaks in the pulse spectrum or at a signal-to-noise ratio of >/=20 dB. Application of the pulse spectrum asymmetry for lidar frequency stabilization is analyzed. Lidar operation without frequency stabilization is considered as well. The method offers a simple Doppler lidar hardware for the creation of low-cost coherent lidars, velocimeters-rangefinders, etc.     

Effect of ion bombardment on the initial stages of thin film growth

The influence of ion bombardment on the initial stages of silver deposition onto amorphous substrates was investigated. Pronounced adatom-depleted zones arise around larger crystallites, and coalescence begins earlier in the deposition process. A defined crystal orientation appears from the beginning of the condensation. The results are explained using the assumption of enhanced surface mobilities of both adatoms and crystallites. The possibility of application of ion bombardment for surface decoration is qualitatively investigates and discussed.     

A modified matyas algorithm (MMA) for random process optimization

The adaptive random search (ARS) methods for optimization, owing to successive proposed improvements, present some favourable features such as simple handling of difficult functions and implicit non-linear constraints, and a high reliability in obtaining the global optimum. In order to confer more efficiency and reliability on the optimization solution for multimodal problems, the successive strategies of ARS techniques derived from the basic algorithm of Matyas [Automn remote Control 26, 224 (1965)] were coupled. A number of examples previously solved by means of other ARS methods provide an evaluation of the efficiency of the proposed algorithm. The optimum procedure parameter values and their significance for a favourable choice are discussed.     

Clustering in ordered dissimilarity data

This paper presents a new technique for clustering either object or relational data. First, the data are represented as a matrix D of dissimilarity values. D is reordered to D * using a visual assessment of cluster tendency algorithm. If the data contain clusters, they are suggested by visually apparent dark squares arrayed along the main diagonal of an image I( D *) of D *. The suggested clusters in the object set underlying the reordered relational data are found by defining an objective function that recognizes this blocky structure in the reordered data. The objective function is optimized when the boundaries in I( D *) are matched by those in an aligned partition of the objects. The objective function combines measures of contrast and edginess and is optimized by particle swarm optimization. We prove that the set of aligned partitions is exponentially smaller than the set of partitions that needs to be searched if clusters are sought in D . Six numerical examples are given to illustrate various facets of the algorithm. © 2009 Wiley Periodicals, Inc.     

Tree-Based Concurrency Control in Distributed Groupware

We present a novel algorithm, called dARB, forsolving the concurrency control problem indistributed collaborative applications. Themain issue of concurrency control is resolvingthe conflicts resulting from simultaneousactions of multiple users. The algorithmreduces the need for manual conflict resolutionby using a distributed arbitration scheme. Themain advantages of our approach are thesimplicity of use and good responsiveness, asthere are no lock mechanisms. Our algorithmrequires the applications to use a tree as theinternal data structure. This makes itapplication independent and suitable forgeneral collaborative applications. The treerequirement is reasonable since many newapplications use XML (extensible MarkupLanguage) for data representation and exchange,and parsing XML documents results in treestructures. Example applications of thealgorithm, a group text editor and acollaborative 3D virtual environment calledcWorld, are implemented and evaluated in theDISCIPLE collaboration framework. We alsointroduce awareness widgets that users avoidgenerating the conflicting events and help inmanual conflict resolution.     

Variable energy positron beam study of Xe-implanted uranium oxide

Doppler broadening of annihilation gamma-line combined with a slow positron beam was used to measure the momentum density distribution of annihilating pair in a set of sintered UO₂ samples. The influence of surface polishing, of implantation with 800-keV ¹³⁶Xe²⁺ at fluences of 1 × 10¹⁵ and 1 × 10¹⁶ Xe cm^?2, and of annealing were studied by following the changes of the momentum distribution shape by means of S and W parameters. The program used for this purpose was VEPFIT. At the two fluences in the stoichiometric as-implanted UO₂, formation of Xe bubbles was not detected. The post-implantation annealing and over-stoichiometry in the as-implanted sample caused Xe precipitation and formation of Xe bubbles.