Synthesis of a polyaminophosphonate and its evaluation as an antiscalant in desalination plant

The cationic monomer, N,N‐diallyl‐3‐(diethylphosphonato)propylammonium chloride, was cyclopolymerized in aqueous solutions using t‐butylhydroperoxide (TBHP) or ammonium persulfate (APS) as initiators to afford a cationic polyelectrolyte (CPE) having a (diethylphosphonato)propyl pendent. The CPE on acidic hydrolysis of the diester groups gave pH‐responsive polyzwitterionic acid (PZA) which on treatment with one and two equivalents NaOH gave zwitterionic/anionic polyelectrolyte (ZAPE) and dianionic polyelectrolyte (DAPE), respectively. The solution properties of the CPE, PZA, ZAPE, and DAPE were investigated in detail by viscometric technique. For the purpose of comparison, the solution properties of the polymers were correlated to a structurally similar polyzwitterion (PZ) having monoethylphosphonate and NH⁺ groups. When performance evaluation was carried out for application in reverse osmosis (RO) plants, DAPE at a concentration of 10 ppm in brackish water feed proved very effective as an inhibitor against calcium sulfate scale. POLYM. ENG. SCI., 54:166–174, 2014. © 2013 Society of Plastics Engineers     

Synthesis and characterization of functionalized carbon nanotubes with different wetting behaviors and their influence on the wetting properties of carbon nanotubes/polymethylmethacrylate coatings

The synthesis and characterization of hydrophobic functionalized multi-wall carbon nanotubes (MWCNTs) were investigated and their influence on the wetting properties of organic coatings and composites was studied. Functionalization was performed using oxidation, 1,3-dipolar cycloaddition, and silanization. Silanization was conducted using three hydrophobic silane precursors: 1H,1H,2H,2H-perfluorodecyltrimethoxysilane, 1H,1H,2H,2H-perfluorooctyltrimethoxysilane, and triethoxyoctylsilane. Functionalization was directly confirmed and characterized by Fourier transform infrared spectroscopy, thermal gravimetric analysis, and scanning electron microscopy. The water contact angle of the functionalized MWCNTs was 40–142° for different surface functionalities and the functionalized MWCNTs were incorporated into an acidic solution of polymethylmethacrylate. The effect of surface functionality and the concentration of the functionalized MWCNTs on the wetting properties of these composites were studied by measuring the water contact angle. Under optimum conditions, composite surfaces with water contact angles greater than 110° were obtained. Atomic force microscopy was used to determine the topography of the surface and energy dispersion spectroscopy was used to determine the distribution of the functionalized MWCNTs in the composite film. It was shown that the hydrophobic functionalized MWCNTs migrated to the surface; this was more pronounced for the more hydrophobic MWCNTs.     

Insertion of novel optically active poly(amide-imide) chains containing pyromellitoyl-bis-l-phenylalanine linkages into the nanolayered silicates modified with l-tyrosine through solution intercalation

In the present investigation, for the first time, functional optically active poly(amide-imide) (PAI)/organonanosilica bionanocomposite films were successfully fabricated through solution intercalation technique. At the start, Cloisite Na⁺ and protonated form of l-tyrosine amino acid were used for the preparation of the novel chiral organoclay via ion-exchange reaction. Then, PAI containing phenylalanine amino acid was synthesized via solution polycondensation of N,N’-(pyromellitoyl)-bis-phenylalanine diacid chloride (5) with 4,4′-diaminodiphenylsulfone (6). This polymer was end-capped with amine end groups near the completion of the reaction to interact chemically with organoclay. Finally, PAI/organ-nanosilica bionanocomposites films containing 5, 10 and 15% of organoclay were prepared via solution intercalation method through blending of organoclay with the PAI solution. The nanostructures and properties of the PAI/organoclay hybrids were investigated using Fourier transform infrared spectroscopy, X-ray diffraction (XRD), scanning electron microscopy, field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and thermogravimetry analysis (TGA) techniques. XRD, FE-SEM and TEM results revealed the formation of exfoliated and intercalated organoclay platelets in the PAI matrix. TGA results indicated that the addition of organoclay into the PAI matrix increases in the thermal decomposition temperatures of the resulted bionanocomposites. The transparency of the nanocomposite films decreased gradually by the addition of organoclay, and the films became semitransparent as well as brittle at high loading of organoclay. Mechanical data indicated improvement in the tensile strength and modulus with organoclay loading. The film containing a 10 wt.%. of organoclay had a tensile strength of the order of 85.24 MPa relative to the 67.52 MPa of the pure PAI.     

Modeling the oxidative coupling of methane using artificial neural network and optimizing of its operational conditions using genetic algorithm

The effect of some operating conditions such as temperature, gas hourly space velocity (GHSV), CH₄/O₂ ratio and diluents gas (mol% N₂) on ethylene production by oxidative coupling of methane (OCM) in a fixed bed reactor at atmospheric pressure was studied over Mn/Na₂WO₄/SiO₂ catalyst. Based on the properties of neural networks, an artificial neural network was used for model developing from experimental data. To prevent network complexity and effective data input to the network, principal component analysis method was used and the number of output parameters was reduced from 4 to 2. A feed-forward back-propagation network was used for simulating the relations between process operating conditions and those aspects of catalytic performance including conversion of methane, C₂ products selectivity, C2 yielding and C₂H₄/C₂H₆ ratio. Levenberg-Marquardt method is presented to train the network. For the first output, an optimum network with 4-9-1 topology and for the second output, an optimum network with 4-6-1 topology was prepared. After simulating the process as well as using ANNs, the operating conditions were optimized and a genetic algorithm based on maximum yield of C₂ was used. The average error in comparing the experimental and simulated values for methane conversion, C₂ products selectivity, yield of C₂ and C₂H₄/C₂H₆ ratio, was estimated as 2.73%, 10.66%, 5.48% and 10.28%, respectively.     

Palynological investigation of some selected species of family Fabaceae from Pakistan,using light and scanning electron microscopy techniques

Pollen morphology of 11 species of family Fabaceae that is, Trifolium alexandrinum, Trifolium resupinatum, Arachis hypogaea, Lathyrus aphaca, Medicago lupulina, Vicia sativa, Lathyrus odoratus, Pongamia pinnata, Melilotus indicus, Medicago polymorpha, Medicago sativa from Pakistan has been investigated by light and scanning electron microscopy. Pollen were generally tricolporate, radially symmetrical, isopolar, elliptic in equatorial view and triangular in polar view under LM. Results showed that pollens were per‐prolate (T. alexandrinum), prolate (T. resupinatum, V. sativa, L. odoratus, Melilotus indicus, M. polymorpha, M. sativa) and sub‐prolate (A. hypogaea, L. aphaca, M. lupulina, P. pinnata). The larger polar/equatorial (P/E) ratio was found in T. alexandrinum (2.26 μm) and the smallest was found in M. lupulina (1.21 μm). The exine of T. resupinatum was 3.00 μm in thickness while others posses smaller exine thickness. The larger pore diameter was found in P. pinnata (16.01 μm) while others have smaller. The length of colpi was larger in Arachis hypogaea (32.24) while others posses smaller. Eight types of surface ornamentation (Psilate, faintly rugulate). Perforate and rugulate to verrucate have been observed under SEM. The pollens were europalynous type. Pollen morphology proved to be useful for the specific delimitation and serve as a tool for the identification and classification of taxa at specific and generic levels and can also be used as a key for the taxonomic features. Diversity in exine sculpture is helpful indicative characters for the isolation of closely related species. Hence, it is clear that both qualitative and quantitative characters of pollen can be useful for differentiating between taxa at specific level.     

Solving the stochastic support vector regression with probabilistic constraints by a high-performance neural network model

This paper offers a recurrent neural network to support vector machine (SVM) learning in stochastic support vector regression with probabilistic constraints. The SVM is first converted into an equivalent quadratic programming (QP) formulation in linear and nonlinear cases. An artificial neural network for SVM learning is then proposed. The presented neural network framework guarantees obtaining the optimal solution of the SVM problem. The existence and convergence of the trajectories of the network are studied. The Lyapunov stability for the considered neural network is also shown. The efficiency of the proposed method is shown by three illustrative examples.

     

Selective dissolution of rare-earth element carbonates in deep eutectic solvents

Dissolution in choline-chloride based deep eutectic solvents(DES) of rare earth elements(REE) from high-purity single carbonate salts of Y, La, Ce, Nd and Sm and from their multicomponent mixtures and also bastn€asite mineral was assessed with a prospect to gain an understanding on the leaching behavior of bastn€asite ores as REE source from DES suspensions. Urea, malonic acid and citric acid were used in different proportions with choline chloride in order to form deep eutectic solvents with desired viscosity and functionality. The results obtained prove promising for use insolvato-metallurgical processes in terms of selective dissolution of the higher-atomic-number(Z) rare earth elements at the expense of the lower-ZREEs and the gangue-originating metal impurities, thus initiating separation among the different REE members from the early hydrometallurgical steps.     

Phosphorus Removal from Si-Fe Alloy Using SiO2-Al2O3-CaO Slag

Metallurgical and Materials Transactions B - Phosphorus removal from silicon using a combination of solvent and slag refining, with lower carbon footprint and lower energy requirement than the...     

Radiosynthesis and biodistribution of [^18F]-tetracosactide using a semi-automated [^18F]SFB production module

In order to prepare a specific melanocortin type 2 receptor (MC2R) ligand, b1-24-corticotrophin was pre-pared in one-step reaction with [18F] SFB and b-1-24-corticotrophin pharmaceutical solution (1 mg/mL, pH=6.5). [18F]SFB was prepared in a semi-automated module in two steps with an overall radiochemical yield of 47% to EOB (not-decay corrected) in 90 min. The 18F-labeled intermediates and 18F-labeled peptide was checked by RTLC and HPLC. The results show that the radiochemical purity is >95% and the yield to EOB (not-decay corrected) is 29% for final 18F-labeled peptide at optimized conditions. Preliminary in vivo studies in normal mice were performed to deter-mine biodistribution of the 18F-labeled peptide for 150 min. The results show that the major tracer uptake is consistent with the natural distribution of MC2R receptors in mammals. Testes/blood and testes/muscle ratios for 18F-labeled peptide at 150 min were 184 and 1.56, respectively, and adipocyte/blood and adipocyte/muscle ratios at 120 min were 221 and 142, respectively. The data support the specific receptor binding of the radiolabeled peptide as reported for MC2R receptor accumulation in adipocytes and testes and demonstrates the retention of biological activity of the pep-tide. This tracer can be used in detection of MC2R distribution in malignancies and sex organ diseases.     

Screening of Food Samples for Zearalenone Toxin Using an Electrochemical Bioassay Based on DNA–Zearalenone Interaction

This study was conducted to design a biosensor as a new, rapid, and sensitive tool for investigation of binding of zearalenone with double-stranded DNA (dsDNA). Polydiallyldimethylammonium chloride (PDDA) as a polycation and multiwall carbon nanotubes (MWCNTs) provide a positively charged surface with a high surface area for the immobilization of dsDNA as a polyanion on the surface of pencil graphite electrode (PGE). Using the dsDNA/MWCNT–PDDA-modified PGE, it was possible to detect the interaction of zearalenone with dsDNA, which allowed us to apply the dsDNA-modified electrode for trace determination of zearalenone. The changes at the oxidation signal of adenine were evaluated before/after each modification/immobilization step. By using dsDNA/PDDA–MWCNT/PGE, zearalenone could be detected as low as 0.005 ng mL^?1. The relative standard deviation of five measurements of 0.5 ng mL^?1 zearalenone was found to be 4.2 %. Finally, the highly stable electrochemical biosensor was applied to analyze the zearalenone concentration in milk and wheat samples.

Open image in new window

Graphical Abstract xElectrochemical DNA Biosensor for Zearalenone detection