Crack Growth in Solid Oxide Fuel Cell Materials: From Discrete to Continuum Damage Modeling

This paper addresses the damage and fracture issues of glass and ceramic materials used in solid oxide fuel cells. Analyses of an internal crack and of an interface crack between dissimilar materials were conducted using a modified boundary layer modeling approach. In this approach, fracture is allowed to occur in a small process window situated at an initial crack tip. Elastic displacement crack-tip fields are prescribed as remote boundary conditions. Crack propagation was first modeled discretely. Next, a continuum damage mechanics (CDM) model for brittle materials was developed to capture damage and crack growth in the process window. In particular, the damage model was applied to a glass-ceramic material that had been developed in-house for sealing purposes. Discrete and continuum damage solutions were then compared. Finally, the CDM model was used to determine the crack propagation direction as a function of a mode mixity measure.     

Water-soluble Copolymers of N-vinylpyrrolidone and Vinyl Acetate: Synthesis, Characterization, and Monomer Reactivity at High Conversions

Homogeneous copolymers of N-vinylpyrrolidone (VP) and vinyl acetate (VA) which form clear aqueous solutions were prepared by free radical polymerization in a solution of isopropanol alcohol, using 2,2-azobisisobutyronitrile as an initiator. They were characterized by FTIR, ¹H-NMR, and element analysis studies. The reactivity ratios of the monomer were computed by the Extended Kelen–Tüdós method at high conversions, using data from both ¹H-NMR and elemental analysis studies. The reactivity ratios of VP and VA in a homogenous copolymer were observed to be very different from that of a heterogeneous copolymer. Additional information was obtained by finding out the sequence length distribution for copolymers.     

Low‐velocity impact of nanocomposite and polymer plates

Nanocomposites are more widely studied today because of higher stiffness, decreased permeability, thermal stability, and many other properties superior to those of regular polymers. However, manufacturers are concerned about implementing nanocomposites because of their lower impact properties with respect to the base polymer. This study focused on low‐velocity impact tests of a thermoplastic olefin by itself and with 5 wt % nanoclay. The impact tests were conducted at ?40, 23.9, and 65.6°C until the polymer and nanocomposite plates experienced complete striker penetration. The force–time and force–deflection responses obtained from the impact testing provided a means of comparing the impact performances of the two materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2309–2315, 2005     

Desalination in the gaza strip: drinking water supply and environmental impact

More than 90% of the population of the Gaza Strip depends on desalinated water for drinking purposes. About 90% of the groundwater is unacceptable for drinking as a result of contamination by nitrate and chloride. One of the major options for resolving the water problems is the utilization of desalination technology for both sea and brackish water. The objective of this article is to address desalination water management in its embryonic stage in the Gaza Strip. The sources of drinking water supply, distribution system and the environmental impact of brine water will be fingered in detail. Desalination facilities range from large seawater plants to small brackish desalination units on a home scale. Governmental, non-governmental and private desalination plants are common. The distribution system of desalinated water is a responsibility of governmental, non-governmental, private small community bodies and even individuals. Disposal of brine water is made either directly or indirectly into the sea, sewage system, poor land, channels, wadies, etc. Brine constituents have an adverse impacton the surrounding environment, e.g., sea life, soil, wastewater treatment plants and the groundwateraquifer. The lack of real environmental impact assessments, especially for mid- and home-scale units may lead to a deterioration of the environment. The fragmentation of the responsibilities of water desalination, distribution of desalinated water and the disposal of brine water suggest that urgent action should be taken (e.g., legislation or establishment of a supervisory body). In other words, strict policies and management actions are to be taken in order to alleviate the health and environmental impact of an important and uncontrolled new system.     

Alternating active-phase algorithm for multimaterial topology optimization problems: a 115-line MATLAB implementation

Structural and Multidisciplinary Optimization - A new algorithm for the solution of multimaterial topology optimization problems is introduced in the present study. The presented method is based on...     

Buoyancy effects on gaseous slip flow in a vertical rectangular microchannel

Consideration is given to the buoyancy effects on the fully developed gaseous slip flow in a vertical rectangular microduct. Two different cases of the thermal boundary conditions are considered, namely uniform temperature at two facing duct walls with different temperatures and adiabatic other walls (case A) and uniform heat flux at two walls and uniform temperature at other walls (case B). The rarefaction effects are treated using the first-order slip boundary conditions. By means of finite Fourier transform method, analytical solutions are obtained for the velocity and temperature distributions as well as the Poiseuille number. Furthermore, the threshold value of the mixed convection parameter to start the flow reversal is evaluated. The results show that the Poiseuille number of case A is an increasing function of the mixed convection parameter and a decreasing function of the channel aspect ratio, whereas its functionality on the Knudsen number is not monotonic. For case B, the Poiseuille number is decreased by increasing each of the mixed convection parameter, the Knudsen number, and the channel aspect ratio.     

Study of the High‐Pressure Vapour‐Liquid Equilibria for Strongly Non‐ideal Binary and Ternary Mixtures

High‐pressure vapour‐liquid equilibria for binary and ternary high polar and asymmetric systems are calculated using the Peng‐Robinson‐Stryjek‐Vera equation of state coupled with the Twu‐Coon (TWMR), the Orbey‐Sandler (OSMR) and the Wong‐Sandler (WSMR) mixing rules. Modified UNIFAC model is used for determining the activity coefficient and excess Gibbs free energy. The calculated results are compared with the experimental data and good agreement is observed. The average absolute deviation percents (AAD%)s indicated that the WSMR has less AAD% than other mixing rules in most of cases.     

Extraction of 2-hydroxyphenol by surfactant coated nanosized magnetic particles

A colloidal suspension of magnetic particles coated with double layer surfactant molecules was prepared, characterized and used for separation of some chemicals. The aqueous magnetic fluid was prepared by chemical precipitation method and characterized by total organic carbon analyzer (TOC), thermogravimetric analysis (TGA) and transmission electron microscopy (TEM). The TOC and TGA measurements indicate that the prepared magnetic particles are coated with surfactant molecules in double layers. The outer surfactant layer has free polar heads. TEM measurement results show that magnetic particles are nanosized. A mixture of 2-hydroxyphenol (strong polar) and 2-nitrophenol (weak polar) was chosen as the target system. Results show that the magnetic fluid can selectively adsorb 2-hydroxyphenol from the mixture, whereas the adsorption of 2-nitrophenol is insignificant. For 2-hydroxyphenol, the adsorption equilibrium can be described well by Langmuir isotherm, and the adsorption kinetic can be fitted well by a linear driving force mass transfer model.     

Eco-friendly electronics,based on nanocomposites of biopolyester reinforced with carbon nanotubes: a review

ABSTRACT

Fabrication of electronic materials from nanocomposite of biopolyesters reinforced with carbon nanotubes can be regarded as the effective alternative for conventional nanocomposites consisting of non-biodegradable polymers. Commercial availability of biopolyester-based nanocomposites is limited because of their high cost compared to other polymers, but the factor of their compostable nature is worthless for environmental protection. Such nanocomposites have potential applications in biodegradable sensors, EMI materials, etc. In this review, the current progress of biopolyester/CNTs nanocomposites in the field of biodegradable electronics is reviewed and also the impact of CNTs dispersion on electrical, thermal and mechanical properties of eco composites is stipulated.     

An enhanced LBP-based technique with various size of sliding window approach for handwritten Arabic digit recognition

Many variations of local binary pattern (LBP) were proposed to enhance its performance, including uniform local binary pattern (ULBP), center-symmetric local binary patterns (CS-LBP), center symmetric local ternary patterns (CS-LTP), center symmetric local multilevel pattern (CS-LMP), etc. In this paper, the accuracies of LBP technique and its variations are enhanced using four different sizes of a sliding window approach. This approach is used for investigating whether the features extracted by LBP are significant enough or its versions are needed as well. Five LBP-based techniques have been used including LBP, CS-LBP, CS-LTP, CS-LMP, and U2LBP. They have been applied to an Arabic digit image dataset called MAHDBase. Support vector machine (SVM) and random forests are utilized as classifiers. The experimental results show that the obtained accuracies have been improved by 19.56%, 21.43%, 5.63%, 6.51% and 5.62% for CS-LBP, CS-LMP, U2LBP, CS-LTP, and LBP, respectively, when the sliding window approach has been applied and SVM with linear kernel has been used as a classifier. Moreover, the results show that there is no need to use LBP variations to enhance the accuracy if the sliding window is applied because the highest accuracy has been acquired using LBP. At the end, the accuracy of proposed systems has been compared against other state-of-the-art LBP-based techniques showing the significance of the proposed systems.