In this study, analytical modeling of the tensile strength of hot-mix asphalt (HMA) mixtures at low temperatures was developed. To do this, HMA mixtures were treated as a two-phase composite material with aggregates (coarse and fine) dispersed in an asphalt mastic matrix. A two-phase composite model, which was similar to Papanicolaou and Bakos's [J. Reinforced Plast. Compos. 11 (1992) 104] model with a particle embedded in an infinite matrix, was proposed. Unlike Papanicolaou and Bakos's model, an axial stress was introduced to the fiber end to consider the load transferred from the asphalt mastic the aggregate. Efforts were also made to consider the effect of aggregate gradation, asphalt mastic degradation, and interfacial damage between the aggregates and asphalt mastic matrix on the tensile strength of the HMA mixtures. Experimental investigations were conducted to validate the developed theoretical relations. A reasonable agreement was found between the predicted tensile strength and the experimental results at low temperatures. Parameters affecting the tensile strength of asphalt mixtures were discussed based on the calculated results. 相似文献
A study of radiation effects on various types of glasses, dielectric optical coatings, cemented optics and fiber was undertaken with a view to select them for extreme radiation environments. Samples were exposed to different radiation doses in the Pakistan Research Reactor-I (PARR-I) for neutron and Cobalt 60 source for gamma irradiation. Transmissions were measured before and after irradiation. The dielectric coatings were subjected to additional tests (adhesion, abrasion and humidity, etc.) as per MIL-M-13508C and MIL-C-675C. All 15 glasses studied showed varying amounts of transmission loss as expected, with negligible degradation for three types. Recovery of transmissions with time/ageing was also studied, with more or less complete recovery with temperature annealing. A faster bleaching of darkened/brown glasses was achieved by using UV lamps or UV laser. The dielectric coatings (HR, AR) and one of the two commercial optical cements showed excellent resistance to neutrons and gamma radiations, and could be good candidates for the fabrication and utilization of optical components in extreme radiation environments. The data allowed several Chinese glasses to be studied for the first time. 相似文献
Estimation of locations of sudden changes in a steplike signal has many signal processing applications; e.g., well-log signal segmentation, ionic-channel signal classification, edge detection, and segmentation of images. In this work, the Cramer-Rao lower bound (CRLB) on locations of steps in one-dimensional (1-D) steplike signals is calculated. The calculation is based on the use of a sigmoidal function to model a sudden-change (step) in the signal. The introduced model has an adjustable parameter that can be used to fit the CRLB calculation to a particular class of steplike signals 相似文献
A theoretical framework is presented to study the consistency of robust estimators used in vision problems involving extraction of fine details. A strong correlation between asymptotic performance of a robust estimator and the asymptotic bias of its scale estimate is mathematically demonstrated where the structures are assumed to be linear corrupted by Gaussian noise. A new measure for the inconsistency of scale estimators is defined and formulated by deriving the functional forms of four recent high-breakdown robust estimators. For each estimator, the inconsistency measures are numerically evaluated for a range of mutual distances between structures and inlier ratios, and the minimum mutual distance between the structures, for which each estimator returns a non-bridging fit, is calculated. 相似文献
This study deals with the neuro-fuzzy (NF) modelling of a real industrial winding process in which the acquired NF model can be exploited to improve control performance and achieve a robust fault-tolerant system. A new simulator model is proposed for a winding process using non-linear identification based on a recurrent local linear neuro-fuzzy (RLLNF) network trained by local linear model tree (LOLIMOT), which is an incremental tree-based learning algorithm. The proposed NF models are compared with other known intelligent identifiers, namely multilayer perceptron (MLP) and radial basis function (RBF). Comparison of our proposed non-linear models and associated models obtained through the least square error (LSE) technique (the optimal modelling method for linear systems) confirms that the winding process is a non-linear system. Experimental results show the effectiveness of our proposed NF modelling approach. 相似文献
Water Resources Management - Reference evapotranspiration (ET0) is a crucial element for deriving irrigation scheduling of major crops. Thus, precise projection of ET0 is essential for better... 相似文献
One of the most important analysis in many hydrological and agricultural studies is to convert the daily rainfall data into sub-daily (hourly) because in many rainfall stations, only the daily rainfall data are available and for a comprehensive rainfall analysis, these data should be converted to sub-daily. Many experimental and analytical methods are available for this conversion but one of the simplest yet accurate ones has been proposed by the Indian Meteorological Department (IMD). Since the IMD method has shown low accuracy in some regions, in this study, the IMD method is modified to a single parameter equation, called Modified Indian Meteorological Department (MIMD) in order to improve the accuracy of the conversion. For this reason, the parameter is calibrated so that the maximum correlation between observed and estimated values is achieved. Five stations in different regions with different climatic conditions were selected so that the daily and sub-daily rainfall data were available in each of them. Then, the parameter of the MIMD method was derived for each station. The results were compared with both observed data and IMD method and it was shown that the mean correlation coefficient of MIMD and IMD methods were 0.9 and 0.73 respectively for 12-h rainfall depth which indicated that the accuracy of the MIMD method in estimation of sub-daily rainfall depths was significantly increased. Moreover, the results showed that the accuracy of the MIMD method decreases as rainfall duration decreases.
A hybrid analytical-intelligent approach is proposed for fuzzy reliability analysis of the composite beams reinforced by zinc oxide (ZnO) nanoparticle. The fuzzy reliability index corresponding to buckling failure mode of nanocomposite beam under thickness-direction external voltage is computed based on three-levels: (1) fuzzy analysis, (2) reliability analysis and (3) analytical buckling analysis. In fuzzy analysis level, an improved gravitational search algorithm has been applied to determine uncertainty interval for membership levels of reliability index. The adaptive formulation with a dynamical self-adjusting process is used for reliability analysis level based on conjugate first-order reliability method (FORM). The self-adjusting term in conjugate sensitivity vector is used to satisfy the sufficient descent condition for controlling instability of FORM formula while the proposed conjugate scalar factor is computed less than the original conjugate FORM, thus it may be provided with the efficient results for the convex problem. The new and previous sensitivity vectors obtained by conjugate and steepest descent vectors dynamically adjusted the proposed conjugate factor. In the buckling analysis level, an exponential theory in conjunction with the method of energy is utilized. Fuzzy random variables including applied voltage, the volume fraction of ZnO, thickness of beam, spring constant and shear constant of the foundation are considered in studied nanocomposite beam. Survey results indicated that the proposed method can provide stable and acceptable fuzzy membership functions for parametric study. Moreover, the ratio of length to thickness and spring constant of foundation are the more sensitive parameters which affect fuzzy reliability index significantly.
Shear connectors play a prominent role in the design of steel-concrete composite systems. The behavior of shear connectors is generally determined through conducting push-out tests. However, these tests are costly and require plenty of time. As an alternative approach, soft computing (SC) can be used to eliminate the need for conducting push-out tests. This study aims to investigate the application of artificial intelligence (AI) techniques, as sub-branches of SC methods, in the behavior prediction of an innovative type of C-shaped shear connectors, called Tilted Angle Connectors. For this purpose, several push-out tests are conducted on these connectors and the required data for the AI models are collected. Then, an adaptive neuro-fuzzy inference system (ANFIS) is developed to identify the most influencing parameters on the shear strength of the tilted angle connectors. Totally, six different models are created based on the ANFIS results. Finally, AI techniques such as an artificial neural network (ANN), an extreme learning machine (ELM), and another ANFIS are employed to predict the shear strength of the connectors in each of the six models. The results of the paper show that slip is the most influential factor in the shear strength of tilted connectors and after that, the inclination angle is the most effective one. Moreover, it is deducted that considering only four parameters in the predictive models is enough to have a very accurate prediction. It is also demonstrated that ELM needs less time and it can reach slightly better performance indices than those of ANN and ANFIS.