A simulation approach for evaluation and improvement of organisational planning in collaborative product development projects

Human behaviour and organisational structure impact collaborative product development outcome on a large scale. Therefore, companies are continuously seeking new opportunities to increase the efficiency, effectiveness and predictability of their collaborative product development projects, and to develop innovative principles for organisational design and management such as multi-functional teams. However, there are many factors which have to be considered and assessed to systematically optimise organisational planning in respect of team configuration, structure organisation, and human behaviour. This paper proposes an agent-based simulation methodology to evaluate and improve the organisational planning in complex product development projects. An agent-based integrated simulation model is formulated which can explicitly represent human behaviour, organisational interactions, and tasks networks. Based on the model, the design agent structure and behaviour protocols are studied in detail, and a simulation platform is developed. Finally, the methodology is evaluated in a collaborative roadway design project, and several management insights are established, which are proven to be effective for the organisational optimisation. The results of the case study also show that the methodology can effectively support the evaluation and improvement of organisational planning.     

Mueller matrix measurements of algae with different shape and size distributions

The full Mueller matrix was measured to obtain the polarization state of the scattered light for a variety of algae with different shapes, wall compositions, sizes, and refractive indices. The experimental setup was a multiple laser Mueller matrix ellipsometer, by which measurements were performed for scattering angles from 16° to 160° sampled at every second degree for wavelengths of 473?nm and 532?nm. Previously, the polarization of light scattered from microalgae was investigated only for a few species, and the Mueller matrix was found to have little variation between the species. In our work a total of 11 algal species were investigated, representing diatoms, dinoflagellates, coccolithophorids, green algae, and a cryptophyte. The selection of species was made to obtain high variability in shape, size, cell wall, and refractive index. As in previous investigations, very small variations were found between species for most of the Mueller matrix elements, but noticeable variations were found for M(11), (M(12)+M(21))/2 and (M(33)+M(44))/2.     

Current status of biobased and biodegradable food packaging materials: Impact on food quality and effect of innovative processing technologies

Fossil-based plastic materials are an integral part of modern life. In food packaging, plastics have a highly important function in preserving food quality and safety, ensuring adequate shelf life, and thereby contributing to limiting food waste. Meanwhile, the global stream of plastics into the oceans is increasing exponentially, triggering worldwide concerns for the environment. There is an urgent need to reduce the environmental impacts of packaging waste, a matter raising increasing consumer awareness. Shifting part of the focus toward packaging materials from renewable resources is one promising strategy. This review provides an overview of the status and future of biobased and biodegradable films used for food packaging applications, highlighting the effects on food shelf life and quality. Potentials, limitations, and promising modifications of selected synthetic biopolymers; polylactic acid, polybutylene succinate, and polyhydroxyalkanoate; and natural biopolymers such as cellulose, starch, chitosan, alginate, gelatine, whey, and soy protein are discussed. Further, this review provides insight into the connection between biobased packaging materials and innovative technologies such as high pressure, cold plasma, microwave, ultrasound, and ultraviolet light. The potential for utilizing such technologies to improve biomaterial barrier and mechanical properties as well as to aid in improving overall shelf life for the packaging system by in-pack processing is elaborated on.     

Identifying and evaluating suitable tasks for autonomous industrial mobile manipulators (AIMM)

This paper investigates the application potential for the technology-push manufacturing technology (TPMT) autonomous industrial mobile manipulation (AIMM), in order to link the conceptual ideas (academia) to actual manufacturing requirements (industry). The approach is based on the proposed TPMT methodology in a comprehensive industrial case study. More than 566 manufacturing tasks have been analyzed according to three main application areas (logistics, assistance, and service) to find their suitability for the AIMM technology. The conducted TPMT analysis shows that AIMM has great potential within the manufacturing industries. More than two thirds of the analyzed manufacturing tasks are solvable with AIMM within the next few years. The AIMM technology, at its current stage, finds most suitable applications within logistics (e.g., transportation and part feeding), moving toward assistance (e.g., (pre)assembly and machine tending), and in the future more service-minded tasks (e.g., maintenance and cleaning). Based on the identified real-world applications, it is possible to raise the AIMM technology to the next levels of industrial maturation, integration, and commercialization.     

Susceptibility of Lactobacillus spp. to antimicrobial agents

Bacteria used as probiotics or in starter cultures may serve as hosts of antibiotic resistance genes, which can be transferred to pathogenic bacteria. Before launching a starter culture or a probiotic product into the market, it is therefore important to verify that the single bacterial isolates (strains) do not contain transferable resistance genes. A study has been undertaken to establish the levels of susceptibility of Lactobacillus spp. to various antimicrobial agents. This is a prerequisite for differentiating putative transferable resistance from natural resistance. A selection of 62 strains has been screened with the use of the Etest (ABBiodisk, Stockholm, Sweden) for their susceptibility to 25 antimicrobial agents. The strains belonged to the following species: Lactobacillus plantarum/pentosus, L. rhamnosus, L. paracasei, L. sakei, L. curvatus and species of the L. acidophilus group: L. johnsonii, L. crispatus, L. gasseri, and L. acidophilus.The results from the Etests have shown that the level of susceptibility to the antimicrobial agents is species-dependent. For the following antimicrobial agents, susceptibility varied several folds between species: vancomycin, teicoplanin, tetracycline, norfloxacin, ciprofloxacin, fusidic acid, and clindamycin. The differences between the species were more subtle for the rest of the tested antimicrobial agents. On the basis of the result, it was possible to suggest minimal inhibition concentrations (MICs) for the individual Lactobacillus species to be used as a microbiological breakpoint when screening strains for transferable resistance genes.     

Validation of the EUROP system for lamb classification in Norway; repeatability and accuracy of visual assessment and prediction of lamb carcass composition

The EUROP classification system is based on visual assessment of carcass conformation and fatness. The first objective was to test the EUROP classification repeatability and accuracy of the national senior assessors of the system in Norway. The second objective was to test the accuracy of the trained and certified abattoir EUROP classifiers in Norway relative to EU Commission's supervising assessors. The third and final objective was to test the accuracy of the EUROP classification system, as assessed by the National senior assessors, for prediction of lean meat, fat and bone percentage and lean meat in relation to bone ratio. The results showed that the repeatability and accuracy of the national senior assessors was good, achieving high correlations both for conformation and fatness. For the abattoir assessors, there were some systematic differences compared to EU Commission's assessors, but these differences were within limits accepted by EU Commission. The relationship between abattoir and national senior assessors was good, with only small systematic differences. This may suggest that there also is a systematic difference between the national senior assessors of the system and EU Commission's assessors. The EUROP system predicted lean meat percentage poorly (R(2)=0.407), with a prediction error for 3.027% lean. For fat and bone percentage, the results showed a fairly good prediction of fat percentage, but poorer for bone percentage, R(2)=0.796 and R(2)=0.450, respectively. The prediction error for fat and bone percentage was 2.300% and 2.125%, respectively. Lean: bone ratio was predicted poorly (R(2)=0.212), with a prediction error of 0.363 lean: bone ratio.     

Risk of cross-infection in a hospital ward with downward ventilation

A two-bed hospital ward with one standing healthcare person and a ceiling-mounted lowimpulse semicircular inlet diffuser is simulated in a full-scale room. Tracer gas is used for simulating gaseous contaminants, and the concentration is measured at different air change rates and different postures of the patients. A textile partition between the beds, which is typical in a hospital ward, is used for protection of the patients in some of the experiments. Three different layouts of return openings are tested. One layout with one opening at the ceiling, another with four openings at the wall opposite to the inlet diffuser, and one with a high location of these four openings. The downward recirculating flow is on average parallel with the partition, and in most cases the partition does not decrease cross-infection. A high location of the four return openings decreases the risk of cross-infection.     

Thermodynamic Studies on the AlN Sintering Powders Treated With Phosphate Species

The processing of aluminum nitride (AlN) ceramics in aqueous media requires the use of a surface layer to protect the surface of the particles against hydrolysis. This surface layer might influence the densification, affecting the reactions between AlN and sintering additives. The present paper describes a thermodynamic and experimental approach to evaluate the effects of a phosphate-based protecting surface layer on the densification of AlN in the presence of YF₃–CaF₂ as sintering aids, and to predict the densification behavior during sintering using thermodynamic assessments. Based on thermodynamic calculations and the measured weight loss of the samples during heating to sintering temperature, the chemical reactions occurring during firing were proposed. The proposed reactions were related to the experimental results as well as the final properties of the AlN samples, namely, thermal conductivity, microstructure, secondary phases, and density.