Dynamically vulcanized thermoplastic elastomer nanocomposites based on linear low-density polyethylene/styrene-butadiene rubber/nanoclay/bitumen: morphology and rheological behavior

Dynamically crosslinked thermoplastic elastomer nanocomposites were synthesized as modifier for the bitumen binder-based asphalts. Linear low-density polyethylene (LLDPE) and styrene-butadiene rubber (SBR), with the ratio of 80/20, bitumen, and organically modified clay (OC) were all melt mixed in the presence of the sulfur curing system. The proposed mixing was carried out in an internal mixer at 160 °C with a rotor speed of 120 rpm. To enhance the molecular interactions between the polymer phases and the clay silicate layers, maleic anhydride-grafted LLDPE (PE-g-MA) with the maleiation degree of 50% was also incorporated into the mixture. Observation of the composite samples, using the scanning electron microscopy (SEM), revealed the matrix dispersed type of morphology for all dynamically vulcanized samples. X-ray diffraction (XRD) and transmission electron microscopy (TEM) examinations evidenced the exfoliation of the clay silicate layers with good dispersion. Rheomechanical spectrometry (RMS) was performed on the prepared nanocomposites. All dynamically vulcanized nanocomposites comprising 2.5% of OC exhibited shear-thinning behavior and non-terminal characteristics with a low frequency range. These indicate the formation of three-dimensional physical networks by the clay nanolayers throughout the LLDPE matrix. The presence of the bitumen in the composition of the prepared nanocomposites improved the flowability of the samples. This is a promising feature of the prepared nanocomposites to be used as an elastic and resistant modifier in the composition of the bitumen-based asphalts.

     

Computational analysis of citric acid pertraction in emulsion liquid membranes

Citric acid is one of the most widely used acids in industry, and its recovery from waste streams is critical. Emulsion liquid membrane (ELM) is one of the most effective recovery methods that has been investigated in recent years. Numerous transport phenomena parameters affect the efficiency of this process. From the process equipment design point of view, optimization based on overall cost is of great importance, and important equipment sizing decisions/constraints must be considered. A physics-based model for a full-scale simulation of ELM systems is very useful. This work is focused on developing and verifying such a model. A coupled particle/mixture simulation was carried out in this work, and the modelling results were fitted on the experimental data. The novelty of this modelling work is physics-based results based on the system's geometry and its effects on the mass transfer resistances. Since the model is physics-based, the model is capable of simulating similar systems with any geometry or experimental conditions.     

Inhibition Studies on Carbonic Anhydrase Isoforms I,II, IX,and XII with a Series of Sulfaguanidines

Two novel sulfaguanidine series, six N-(N,N′-dialkyl/dibenzyl-carbamimidoyl) benzenesulfonamide derivatives and nine N-(N-alkyl/benzyl-carbamimidoyl) benzenesulfonamide derivatives, were obtained by desulfidative amination of easily accessible dimethyl arylsulfonylcarbonimidodithioates under catalyst- and base-free conditions. The newly synthesized compounds were tested for the inhibition of four different isozymes of human carbonic anhydrase (hCA I, II, IX and XII, EC 4.2.1.1). Both series reported here were inactive against the off-target isozymes hCA I and II (K_i>100 μM). Interestingly, all investigated compounds inhibited both target isozymes hCA IX and XII in the submicromolar to micromolar ranges in which K_i values spanned from 0.168 to 0.921 μM against hCA IX and from 0.335 to 1.451 μM against hCA XII. The results indicated that N-(N-alkyl/benzyl-carbamimidoyl) benzenesulfonamides were slightly more potent inhibitors than N-(N,N′-dialkyl/dibenzyl-carbamimidoyl) benzenesulfonamides. Among the evaluated compounds, N-n-octyl-substituted N-carbamimidoylbenzenesulfonamide showed the most significant activity with a K_i value of 0.168 μM against hCA IX, which was four-fold more selective toward this isozyme versus hCA XII. Again, another derivative from N-(N-alkyl/benzyl-carbamimidoyl) benzenesulfonamide series, N-p-methylbenzyl-substituted N-carbamimidoylbenzenesulfonamide, demonstrated superior inhibitory activity against hCA XII with a K_i value of 0.335 μM.     

Mangrove-mediated synthesis of silver nanoparticles using native Avicennia marina plant extract from southern Iran

The development of eco-friendly and nontoxic processes for the synthesis of nanoparticles is one of the most important discussed issues in nanotechnology science. This study reports the green synthesis of silver nanoparticles (AgNPs) using aqueous extract of leaf, stem, and root of Avicennia marina, the native and dominant mangrove plant in southern Iran. Among the different plant parts, the extract of leaves yielded the maximum synthesis of AgNPs. Synthesized AgNPs were investigated using UV–visible spectrophotometry, transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), and Fourier transform infrared (FTIR) spectroscopy. Absorption spectrum in 420?nm confirmed the synthesis of AgNPs. TEM images revealed that the synthesized AgNPs had the same spherical morphology with a size range between 0 and 75?nm. The distribution size histogram indicated that the most frequent particles were in the range of 10–15?nm and the mean size of nanoparticles was 17.30?nm. The results of SEM image showed nanoparticles with a size range between 15 and 43?nm. XRD pattern indicated the crystalline nature of synthesized nanoparticles. EDS results confirmed the presence of elements like silver, carbon, chlorine, nitrogen, and oxygen in the nanoparticles produced from leaf extract. Silver had the maximum percentage of formation, 51.6%. FTIR indicated the presence of different functional groups such as amines, alcohol, alkanes, phenol, alkyl halides, and aromatic loops in the synthesis process. Green biosynthesis of AgNPs using aqueous extract of native A. marina appears rapid, reliable, nontoxic, and eco-friendly.     

Plasticized poly(vinyl chloride) composites: Influence of different nanofillers as antimigration agents

In this study, plasticized poly(vinyl chloride) (PVC) composites with different nanofillers, including single‐walled carbon nanotubes (SWCNTs), organoclay, TiO₂, and ZnO nanoparticles, were prepared, and their effects on plasticizer migration were investigated. Scanning electron micrographs revealed the dispersion quality of the nanofillers in the polymer matrix. It had a significant influence on the performance of the nanofillers in the process of plasticizer migration. Migration and exudation tests showed that the nanofillers could efficiently hinder plasticizer migration. On the basis of these results, we concluded that carbon nanotubes were the best antimigration agent in the plasticized system. This was ascribed to the high aspect ratio of the SWCNTs and the good interactions between them and the plasticizer. Also, TiO₂ nanoparticles showed a better performance compared to the ZnO nanoparticles. This was due to the more homogeneous dispersion of the TiO₂ in the polymer matrix and the higher surface area of the particles. The differential scanning calorimetry thermograms were in good agreement with the migration tests. The lowest change in the glass‐transition temperature was observed for the composite filled with SWCNTs. This indicated that a lower amount of the plasticizer migrated from PVC. The thermogravimetric analysis curves showed that the incorporation of the nanofillers improved the thermal stability of the PVC. The results could be useful for determining the efficiency of plasticized PVC in applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42559.     

Al2O3 Colloidal Nanocrystals with Strong UV Emission

A facile sol–gel procedure has been developed for the synthesis of colloidal alumina nanocrystals. For the first time, optical characterization procedures were employed to study the quantum confinement effects in optical properties of the prepared Al₂O₃ sol. Accordingly, the hyperbolic band model was used to determine the optical band gap of colloidal alumina nanocrystals. X‐Ray diffraction pattern was used to study the crystallographic phase of the dried gel. Morphological characterization was performed using scanning electron microscopy (SEM). Inductively Coupled Plasma (ICP) emission spectroscopy was used to determination purity of the Al₂O₃ powder. High‐resolution TEM showed that the diameter of colloidal nanocrystals is about 10 nm. Photoluminescence spectroscopy demonstrated that quantum yields for colloidal nanocrystals are 68% with 300 nm excitation wavelength. The experimental observations confirm that highly stable alumina sol with strong UV emission was synthesized. The mentioned optical properties have not been reported before.