A provable and secure mobile user authentication scheme for mobile cloud computing services

The mobile cloud computing (MCC) has enriched the quality of services that the clients access from remote cloud‐based servers. The growth in the number of wireless users for MCC has further augmented the requirement for a robust and efficient authenticated key agreement mechanism. Formerly, the users would access cloud services from various cloud‐based service providers and authenticate one another only after communicating with the trusted third party (TTP). This requirement for the clients to access the TTP during each mutual authentication session, in earlier schemes, contributes to the redundant latency overheads for the protocol. Recently, Tsai et al have presented a bilinear pairing based multi‐server authentication (MSA) protocol, to bypass the TTP, at least during mutual authentication. The scheme construction works fine, as far as the elimination of TTP involvement for authentication has been concerned. However, Tsai et al scheme has been found vulnerable to server spoofing attack and desynchronization attack, and lacks smart card‐based user verification, which renders the protocol inapt for practical implementation in different access networks. Hence, we have proposed an improved model designed with bilinear pairing operations, countering the identified threats as posed to Tsai scheme. Additionally, the proposed scheme is backed up by performance evaluation and formal security analysis.     

Ground plane impact on quadrifilar helix antenna performance with respect to deployment heights

Quadrifilar helix antenna (QHA) has its applications in satellite communications. This paper presents the performance optimisation of input and radiation characteristics of QHA in the presence of infinite and finite metallic ground planes. For the infinite ground plane, it has been observed that input parameters such as impedance and voltage standing wave ratio (VSWR) are stable, and the antenna has broader half power beamwidth (HPBW). Smaller metallic platforms that act as finite ground planes produce better 3‐dB axial ratio beamwidth and boresight axial ratio. Deployment of QHA on smaller metallic platforms such as nanosatellites and CubeSats enhances the circularly polarised beamwidth of the antenna with improved boresight axial ratio. However, on large low earth orbit (LEO) satellites, stable input characteristics and broader HPBW have been achieved at the cost of narrow circularly polarised beamwidth and degraded boresight axial ratio.     

基于K个最近邻点的遗传程序的数字调制样式自动分类

在许多不同的民用和军用领域,调制样式自动分类都是一个非常有趣的问题。本文提出了一种基于K个最近邻点(K-Nearest Neighbor,KNN)的遗传程序(Genetic Programming,GP)算法。该算法采用了基于K个最近邻点的遗传程序,用来识别BPSK、QPSK、16QAM和64QAM调制信号。该算法用高阶累积量作为输入特征,并使用一种分两个阶段的分类方法来改善分类精度。计算机仿真将所提出算法与已有的算法进行了比较,从而证明了该算法的优异性能。     

On-chip high voltage charge pump in standard low voltage CMOS process

An on-chip high voltage tolerant 4VDD charge pump with symmetrical architecture in a standard low voltage 1.8 V 0.18 /spl mu/m CMOS process is presented. For a 250 k/spl Omega/ load, circuit efficiency of the charge pump is approximately 71%. All the MOS transistors satisfy typical voltage stress related reliability requirements for standard low voltage CMOS devices.     

Autocorrelation model-based identification method for ARMA systems in noise

A novel method for parameter estimation of minimum-phase autoregressive moving average (ARMA) systems in noise is presented. The ARMA parameters are estimated using a damped sinusoidal model representation of the autocorrelation function of the noise-free ARMA signal. The AR parameters are obtained directly from the estimates of the damped sinusoidal model parameters with guaranteed stability. The MA parameters are estimated using a correlation matching technique. Simulation results show that the proposed method can estimate the ARMA parameters with better accuracy as compared to other reported methods, in particular for low SNRs.     

High-performance FIR filter design based on sharing multiplication

Finite impulse response (FIR) filtering can be expressed as multiplications of vectors by scalars. We present high-speed designs for FIR filters based on a computation sharing multiplier which specifically targets computation re-use in vector-scalar products. The performance of the proposed implementation is compared with implementations based on carry-save and Wallace tree multipliers in 0.35-/spl mu/m technology. We show that sharing multiplier scheme improves speed by approximately 52 and 33% with respect to the FIR filter implementations based on the carry-save multiplier and Wallace tree multiplier, respectively. In addition, sharing multiplier scheme has a relatively small power delay product than other multiplier schemes. Using voltage scaling, power consumption of the FIR filter based on computation sharing multiplier can be reduced to 41% of the FIR filter based on the Wallace tree multiplier for the same frequency of operation.     

Piezoelectric Sensors Operating at Very High Temperatures and in Extreme Environments Made of Flexible Ultrawide-Bandgap Single-Crystalline AlN Thin Films

Extreme environments are often faced in energy, transportation, aerospace, and defense applications and pose a technical challenge in sensing. Piezoelectric sensor based on single-crystalline AlN transducers is developed to address this challenge. The pressure sensor shows high sensitivities of 0.4–0.5 mV per psi up to 900 °C and output voltages from 73.3 to 143.2 mV for input gas pressure range of 50 to 200 psi at 800 °C. The sensitivity and output voltage also exhibit the dependence on temperature due to two origins. A decrease in elastic modulus (Young's modulus) of the diaphragm slightly enhances the sensitivity and the generation of free carriers degrades the voltage output beyond 800 °C, which also matches with theoretical estimation. The performance characteristics of the sensor are also compared with polycrystalline AlN and single-crystalline GaN thin films to investigate the importance of single crystallinity on the piezoelectric effect and bandgap energy-related free carrier generation in piezoelectric devices for high-temperature operation. The operation of the sensor at 900 °C is amongst the highest for pressure sensors and the inherent properties of AlN including chemical and thermal stability and radiation resistance indicate this approach offers a new solution for sensing in extreme environments.     

A Robust Wearable Point-of-Care CNT-Based Strain Sensor for Wirelessly Monitoring Throat-Related Illnesses

Point-of-care testing (POC) has the ability to detect chronic and infectious diseases early or at the time of occurrence and provide a state-of-the-art personalized healthcare system. Recently, wearable and flexible sensors have been employed to analyze sweat, glucose, blood, and human skin conditions. However, a flexible sensing system that allows for the real-time monitoring of throat-related illnesses, such as salivary parotid gland swelling caused by flu and mumps, is necessary. Here, for the first time, a wearable, highly flexible, and stretchable piezoresistive sensing patch based on carbon nanotubes (CNTs) is reported, which can record muscle expansion or relaxation in real-time, and thus act as a next-generation POC sensor. The patch offers an excellent gauge factor for in-plane stretching and spatial expansion with low hysteresis. The actual extent of muscle expansion is calculated and the gauge factor for applications entailing volumetric deformations is redefined. Additionally, a bluetooth-low-energy system that tracks muscle activity in real-time and transmits the output signals wirelessly to a smartphone app is utilized. Numerical calculations verify that the low stress and strain lead to excellent mechanical reliability and repeatability. Finally, a dummy muscle is inflated using a pneumatic-based actuator to demonstrate the application of the affixed wearable next-generation POC sensor.     

Hybrid wideband transceiver design for achievable rate maximization in millimeter-wave MIMO systems

Telecommunication Systems - This paper proposes two algorithms for hybrid (Analog–Digital) beamforming in a single-user millimeter-wave (mm-wave) multi-input multi-output (MIMO) systems under...     

Emulating Software Defined Network using Mininet-ns3-WIFI Integration for Wireless Networks

SDN enables a new networking paradigm probable to improve system efficiency where complex networks are easily managed and controlled. SDN allows network virtualization and advance programmability for customizing the behaviour of networking devices with user defined features even at run time. SDN separates network control and data planes. Intelligently controlled network management and operation, such that routing is eliminated from forwarding elements (switches) while shifting the routing logic in a centralized module named SDN Controller. Mininet is Linux based network emulator which is cost effective for implementing SDN having in built support of OpenFlow switches. This paper presents practical implementation of Mininet with ns-3 using Wi-Fi. Previous results reported in literature were limited upto 512 nodes in Mininet. Tests are conducted in Mininet by varying number of nodes in two distinct scenarios based on scalability and resource capabilities of the host system. We presented a low cost and reliable method allowing scalability with authenticity of results in real time environment. Simulation results show a marked improvement in time required for creating a topology designed for 3 nodes with powerful resources i.e. only 0.077 sec and 4.512 sec with limited resources, however with 2047 nodes required time is 1623.547 sec for powerful resources and 4615.115 sec with less capable resources respectively.