Effect of various surface preparation techniques on the delamination properties of vacuum infused Carbon fiber reinforced aluminum laminates (CARALL): Experimentation and numerical simulation

Carbon fiber reinforced aluminum laminates (CARALL) are one of the aluminum based Fiber metal laminates (FMLs) which, due to their high strength to weight ratio and good impact resistance are greatly replacing aluminum alloys in aircraft structures. In this research work, interlaminate shear strength of Vacuum assisted resin transfer molding (VARTM) manufactured CARALL has been investigated. Numerical simulation model incorporated with real time material data has been developed to predict the delamination behavior of CARALL laminates. Standard CARALL specimens with different surface morphologies were prepared by electric discharge machining, mechanical, chemical and electrochemical surface treatments. T-peel tests were carried out according to standard ASTM D1876-08 to find out inter laminate shear strength. FMLs made out of mechanically, chemically and electrochemically cleaned metal sheets depicted high interlaminate shear strength. SEM micrographs of failed surfaces verify the high adhesive strength of epoxy. Developed numerical simulation model accurately predicts the delamination behavior of CARALL as observed during experimentation.     

Static and low order anti-windup synthesis for cascade control systems with actuator saturation: An application to temperature-based process control

In this paper, a new framework for designing static and low order anti-windup compensator (AWC) for industrial cascade control systems with actuator saturation constraint is presented. Based on less conservative block diagonal quadratic Lyapunov function, sector boundedness, decoupled architecture, norm reduction and cascade loop compensation, linear matrix inequalities are developed which guarantee stability and suitable performance for overall closed-loop system. Static AWC parameters are obtained by comparing the full order AWC architecture with generalized architecture for cascade control system. Low order AWC is designed by sub-optimal approach in which AWC weights are tuned by designer. Anti-windup compensator is divided into inner and outer loop compensators which compensate the effect of saturation at each level. It is observed that the proposed methodology is less conservative than the traditional AWC schemes when applied to cascade control systems. The proposed scheme is successfully tested experimentally on a temperature-based process control system and results are outlined.     

Flexible and Autonomous Integrated System for Characterizing Metal Oxide Gas Sensor Response in Dynamic Environment

Characterization and calibration of gas sensor is a complex problem due to the dynamic behavior of gases and the limitations of current technology. This article reports a flexible, robust, and autonomous integrated system that is able to perform characterization on metal oxide-based gas sensors in dynamic environments. The system controls the concentration and flow of the relevant gases into the gas chamber and simultaneously measuring the sensor response. This feature allows the characterization of the sensor under continuous dynamic flow of gases similar to conditions on a robot or flow pipes. Several experiments have been performed on the system using hydrogen sulfide. The results provide information on the general characteristics of the sensor as well as its sensitivity. The noise levels were studied with different reference voltages. Overall, the results verify that the system is reliable and able to produce repeatable measurements.     

EXPERIMENTAL INVESTIGATIONS INTO THE INFLUENCE OF MAJOR OPERATING PARAMETERS DURING MICRO-ELECTRO DISCHARGE DRILLING OF CEMENTED CARBIDE

Present study investigates the influence of major operating parameters on the performance of micro-EDM drilling of cemented carbide (WC-10wt%Co) and identifies the ideal values for improved performance. The operating parameters studied were electrode polarity, gap voltage, resistance, peak current, pulse duration, pulse interval, duty ratio, electrode rotational speed and EDM speed. The performance of micro-EDM drilling process was evaluated by machining time, material removal rate (MRR), relative electrode wear ratio (RWR), spark gap, surface finish and dimensional accuracy of micro-holes. It has been found that there are two major conflicting issues in the micro-EDM of carbide. If the primary objective is to obtain better surface finish, it can be obtained by the sacrifice of high machining time, low MRR and high RWR. However, for faster micro-EDM, the surface roughness is higher and electrode wear is again much higher. It is concluded that negative electrode polarity, gap voltage of 120 V, resistance of 33 Ω, peak current of 8 A, pulse duration of 21 μs, pulse interval of 30 μs, duty cycle of 0.47, electrode rotational speed of 700 rpm and EDM speed of 10 μm/s can be considered as ideal parameters to provide improved performances during the micro-EDM of WC-Co.     

Continuous reverse k nearest neighbors queries in Euclidean space and in spatial networks

In this paper, we study the problem of continuous monitoring of reverse k nearest neighbors queries in Euclidean space as well as in spatial networks. Existing techniques are sensitive toward objects and queries movement. For example, the results of a query are to be recomputed whenever the query changes its location. We present a framework for continuous reverse k nearest neighbor (RkNN) queries by assigning each object and query with a safe region such that the expensive recomputation is not required as long as the query and objects remain in their respective safe regions. This significantly improves the computation cost. As a byproduct, our framework also reduces the communication cost in client–server architectures because an object does not report its location to the server unless it leaves its safe region or the server sends a location update request. We also conduct a rigid cost analysis for our Euclidean space RkNN algorithm. We show that our techniques can also be applied to answer bichromatic RkNN queries in Euclidean space as well as in spatial networks. Furthermore, we show that our techniques can be extended for the spatial networks that are represented by directed graphs. The extensive experiments demonstrate that our techniques outperform the existing techniques by an order of magnitude in terms of computation cost and communication cost.     

MTPSO algorithm for solving planar graph coloring problem

In this paper, we proposed a modified turbulent particle swarm optimization (named MTPSO) model for solving planar graph coloring problem based on particle swarm optimization. The proposed model is consisting of the walking one strategy, assessment strategy and turbulent strategy. The proposed MTPSO model can solve the planar graph coloring problem using four-colors more efficiently and accurately. Compared to the results shown in Cui et al. (2008), not only the experimental results of the proposed model can get smaller average iterations but can get higher correction coloring rate when the number of nodes is greater than 30.     

Structure and reversibility of 2D hexagonal cellular automata

Cellular automata are used to model dynamical phenomena by focusing on their local behavior which depends on the neighboring cells in order to express their global behavior. The geometrical structure of the models suggests the algebraic structure of cellular automata. After modeling the dynamical phenomena, it is sometimes an important problem to be able to move backwards in order to understand it better. This is only possible if cellular automata is reversible. In this paper, 2D finite cellular automata defined by local rules based on hexagonal cell structure are studied. Rule matrix of the hexagonal finite cellular automaton is obtained. The rank of rule matrices representing the 2D hexagonal finite cellular automata via an algorithm is computed. It is a well known fact that determining the reversibility of a 2D cellular automata is a very difficult problem in general. Here, the reversibility problem of this family of 2D hexagonal cellular automata is also resolved completely.     

SNELM: SqueezeNet-Guided ELM for COVID-19 Recognition

(Aim) The COVID-19 has caused 6.26 million deaths and 522.06 million confirmed cases till 17/May/2022. Chest computed tomography is a precise way to help clinicians diagnose COVID-19 patients. (Method) Two datasets are chosen for this study. The multiple-way data augmentation, including speckle noise, random translation, scaling, salt-and-pepper noise, vertical shear, Gamma correction, rotation, Gaussian noise, and horizontal shear, is harnessed to increase the size of the training set. Then, the SqueezeNet (SN) with complex bypass is used to generate SN features. Finally, the extreme learning machine (ELM) is used to serve as the classifier due to its simplicity of usage, quick learning speed, and great generalization performances. The number of hidden neurons in ELM is set to 2000. Ten runs of 10-fold cross-validation are implemented to generate impartial results. (Result) For the 296-image dataset, our SNELM model attains a sensitivity of 96.35 ± 1.50%, a specificity of 96.08 ± 1.05%, a precision of 96.10 ± 1.00%, and an accuracy of 96.22 ± 0.94%. For the 640-image dataset, the SNELM attains a sensitivity of 96.00 ± 1.25%, a specificity of 96.28 ± 1.16%, a precision of 96.28 ± 1.13%, and an accuracy of 96.14 ± 0.96%. (Conclusion) The proposed SNELM model is successful in diagnosing COVID-19. The performances of our model are higher than seven state-of-the-art COVID-19 recognition models.     

A robust and efficient convolutional deep learning framework for age-invariant face recognition

Extensive research has been carried out in the past on face recognition, face detection, and age estimation. However, age-invariant face recognition (AIFR) has not been explored that thoroughly. The facial appearance of a person changes considerably over time that results in introducing significant intraclass variations, which makes AIFR a very challenging task. Most of the face recognition studies that have addressed the ageing problem in the past have employed complex models and handcrafted features with strong parametric assumptions. In this work, we propose a novel deep learning framework that extracts age-invariant and generalized features from facial images of the subjects. The proposed model trained on facial images from a minor part (20–30%) of lifespan of subjects correctly identifies them throughout their lifespan. A variety of pretrained 2D convolutional neural networks are compared in terms of accuracy, time, and computational complexity to select the most suitable network for AIFR. Extensive experimental results are carried out on the popular and challenging face and gesture recognition network ageing dataset. The proposed method achieves promising results and outperforms the state-of-the-art AIFR models by achieving an accuracy of 99%, which proves the effectiveness of deep learning in facial ageing research.     

Bangla language modeling algorithm for automatic recognition of hand-sign-spelled Bangla sign language

Because of using traditional hand-sign segmentation and classification algorithm,many diversities of Bangla language including joint-letters,dependent vowels etc.and representing 51 Bangla written characters by using only 36 hand-signs,continuous hand-sign-spelled Bangla sign language(BdSL)recognition is challenging.This paper presents a Bangla language modeling algorithm for automatic recognition of hand-sign-spelled Bangla sign language which consists of two phases.First phase is designed for hand-sign classification and the second phase is designed for Bangla language modeling algorithm(BLMA)for automatic recognition of hand-sign-spelled Bangla sign language.In first phase,we have proposed two step classifiers for hand-sign classification using normalized outer boundary vector(NOBV)and window-grid vector(WGV)by calculating maximum inter correlation coefficient(ICC)between test feature vector and pre-trained feature vectors.At first,the system classifies hand-signs using NOBV.If classification score does not satisfy specific threshold then another classifier based on WGV is used.The system is trained using 5,200 images and tested using another(5,200×6)images of 52 hand-signs from 10 signers in 6 different challenging environments achieving mean accuracy of 95.83%for classification with the computational cost of 39.972 milliseconds per frame.In the Second Phase,we have proposed Bangla language modeling algorithm(BLMA)which discovers allhidden charactersbased onrecognized charactersfrom 52 hand-signs of BdSL to make any Bangla words,composite numerals and sentences in BdSL with no training,only based on the result of first phase.To the best of our knowledge,the proposed system is the first system in BdSL designed on automatic recognition of hand-sign-spelled BdSL for large lexicon.The system is tested for BLMA using hand-sign-spelled 500 words,100 composite numerals and 80 sentences in BdSL achieving mean accuracy of 93.50%,95.50%and 90.50%respectively.