Study on the Components and Performance of GCrlS Bearing Steel Surface by Gas Multi-elements Penetrating

GAS multi-elements penetrating technology is a newsurface hardening technology developed on the basisof carbonitriding technology.It can not only shortenthe production period,but also improve the mechanicalperformances of the parts,such as torsional strength,flexural strength,wear resistance,and fatigue resistance"'.It features low-temperature multi-elementspenetration that the physical chemistry process ofoxidation-reduction generates the active atoms in thepart surface.In the beginning,the …     

紫外光快速固化的树枝状丙烯酸酯齐聚物的制备和性能

通过乙二胺(EDA)和三羟甲基丙烷三丙烯酸酯(TMPTA)，以甲醇为催化剂，在30℃进行6小时Michael加成反应，可制得含多个双键的树枝状丙烯酸酯齐聚物(DAO)．与相似分子量的线性丙烯酸酯齐聚物相比，DAO粘度低，用作紫外光固化树脂，其固化速度快，且固化产物硬度好，耐溶剂性好．     

丙烯酸酯三元共聚物酸掺杂改性聚苯胺的研究

选择丙烯酸 (AA)、丙烯酸丁酯 (BA)和甲基丙烯酸甲酯 (MMA)三元共聚物对聚苯胺 (PAn)进行改性 ,研究了BA的用量和引发剂浓度对PAn导电率的影响 ,对样品进行DSC、FTIR和SEM测试。结果表明 ,丙烯酸酯三元共聚物酸对PAn有良好的掺杂改性作用 ,当共聚单体 (AA -BA -MMA)组成为 10∶45∶45 (质量比 ) ,引发剂浓度为0 0 5 48mol·L-1时 ,可制得电导率达 1 42 1S·cm-1的导电PAn。     

环形截面提升管内颗粒的运动行为

采用PDPA(phase Doppler particle analyzer system)及磷光颗粒示踪技术对环形截面提升管中颗粒的运动行为进行了研究。与传统提升管相比，环形截面提升管中颗粒速度分布的均匀性有所改善，其最高速度与最低速度之差变小。环形截面提升管最大速度值出现在相对径向位置φ=0.3-0．4处。与传统提升管相似，环形截面提升管内颗粒的轴向返混较严重，停留时间分布曲线存在较明显的拖尾，其中颗粒的轴向Peclet数与传统提升管也处于同一数量级范围。提升管床结构的改变并未显著改变其中气固流动的微观相结构，稀相与密相颗粒团微观两相仍然存在，这种微观相结构是造成颗粒严重返混的决定性原因：稀相中的颗粒与密相颗粒团中的颗粒分别造成了颗粒停留时间分布曲线的前峰与拖尾峰。     

水性聚氨酯材料配方设计技巧

介绍了优选法的0.618法和分数法,对其进行改进创新和原理证明,并应用于生产涂料配方设计中。     

Effects of substituted aromatic heterocyclic phosphate salts on properties,crystallization, and melting behaviors of isotactic polypropylene

Nucleation effects of 2,2′‐methylene‐bis (4,6‐di‐tert‐butylphenyl) phosphate metal salts as a nucleating agent for isotactic polypropylene (iPP) were investigated with differential scanning calorimeter and polarized optical microscope, and their effects on mechanical, optical, and heat resistance properties of iPP were also studied. The results showed that monovalent metal salts of substituted aromatic heterocyclic phosphate such as sodium salt, lithium salt, and potassium salt had a good performance. With 0.2 wt % of sodium salt, lithium salt, or potassium salt incorporated into iPP, the crystallization peak temperature of iPP could be increased by 13.5, 13.6, and 15.0°C, respectively; the mass fraction of crystallinity of iPP could be increased by about 5%; and crystallization rate was enhanced increasingly. Meanwhile the tensile strength and flexural modulus of iPP could be increased by about 10 and 30%, respectively, and the clarity and heat distortion temperature of iPP could also be improved significantly. But bivalent and trivalent metal salts of substituted aromatic heterocyclic phosphate had little effect on properties of iPP. Meanwhile the morphology study showed that the addition of monovalent sodium salt could decrease the spherulite size of iPP significantly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4868–4874, 2006     

Carbon nanofibers: Synthesis, characterization, and electrochemical properties

Carbon nanofibers (CNFs) have been synthesized by co-catalyst deoxidization process by a reaction between C₂H₅OC₂H₅, Zn and Fe powder at 650 °C for 10 h. These nanofibers exhibit diameters of ∼80 nm and lengths ranging from several micrometers to tens of micrometers. X-ray diffraction, Raman spectroscopy, and high-resolution transmission electron microscopy indicate that as-prepared CNFs possess low graphitic crystallinity. The resultant CNFs as electrode shows capacity of ∼220 mAh/g and high reversibility with little hysteresis in the insertion/deintercalation reactions of lithium-ion. In addition, the possible growth of CNFs is discussed.     

QH－1型扁环填料的气液接触性能

本文简要介绍了新近研制的ＱＨ－１型扁环填料对于汽液接触过程的流体力学与传质性能。实验表明，这种填料具有通量大、阻力小、传质效率高的优点，可望代替鲍尔环等常用填料，以取得良好经济效益