Extraction of penicillin G from simulated media by an emulsion liquid membrane process

The extraction of penicillin G from simulated media was performed by water/oil/water (w/o/w) emulsion liquid membranes (ELMs) and studied under various operational conditions in a batch system. The degree of extraction achieved was between 80% and 95% under specific conditions. A concentration of greater than nine times the initial concentration of penicillin G in the external phase was obtained in the internal phase. The pH of the internal aqueous solution, containing a basic salt, was theoretically calculated on the basis of the amount of penicillin G transported into the internal phase. The calculated results agreed with the experimental data well and were used to select a suitable type and concentration of a basic salt in the internal phase to give a pH within the range 5 to 8 where penicillin G was stable after the termination of extraction. The extraction of penicillin G was successfully performed by the ELM process with sodium carbonate in the internal phase.     

Ignition of nickel in environments containing oxygen and chlorine

The mixed oxidation of nickel in gases containing both oxygen and chlorine has been investigated using the techniques of thermogravimetric analysis and examination of the corrosion products by scanning electron microscopy. Two regimes of corrosion behavior have been detected: one in which a protective oxide film is present and the rate of corrosion is controlled by the transport of the volatile products of the reaction between the gas phase and the oxide, and one in which the protective film is penetrated and corrosion occurs rapidly enough to result in the ignition of the specimen. The oxide corrosion products on the specimens after corrosion have characteristic morphologies, with the products of volatilization type corrosion consisting of large grains and the products of ignition type attack consisting of fine spherical particles. Ignition is a serious hazard in environments containing 0.25 pct or more Cl₂ and 4 pct or more O₂ by volume at temperatures between 1000 K and 1100 K, but is not produced by exposures at higher temperatures. A model based on the stability of the protective film in steady state corrosion is presented which can be used to predict the transition from volatilization to ignition type attack.     

On the design of multiple key hashing files for concurrent orthogonal range retrieval between two disks

This paper concerns the following problem: given a set of multi-attribute records, a fixed number of buckets and a two-disk system, arrange the records into the buckets and then store the buckets between the disks in such a way that, over all possible orthogonal range queries (ORQs), the disk access concurrency is maximized. We shall adopt the multiple key hashing (MKH) method for arranging records into buckets and use the disk modulo (DM) allocation method for storing buckets onto disks. Since the DM allocation method has been shown to be superior to any other allocation methods for allocating an MKH file onto a two-disk system for answering ORQs, the real issue is knowing how to determine an optimal way for organizing the records into buckets based upon the MKH concept.

A performance formula that can be used to evaluate the average response time, over all possible ORQs, of an MKH file in a two-disk system using the DM allocation method is first presented. Based upon this formula, it is shown that our design problem is related to a notoriously difficult problem, namely the Prime Number Problem. Then a performance lower bound and an efficient algorithm for designing optimal MKH files in certain cases are presented. It is pointed out that in some cases the optimal MKH file for ORQs in a two-disk system using the DM allocation method is identical to the optimal MKH file for ORQs in a single-disk system and the optimal average response time in a two-disk system is slightly greater than one half of that in a single-disk system.     

Electrical and optical feedback in an InGaAs/InP light-amplifyingoptical switch (LAOS)

A circuit model for optical and electrical feedback has been developed to investigate the cause of negative differential resistance (NDR) switching in a series connected heterojunction phototransistor (HPT) light-emitting diode (LED) device. The model considers optical feedback from the light generated in the LED, electrical feedback from the holes thermally emitted over the LED cladding layer, nonlinear gain of the HPT, the Early effect, and leakage resistance. The analysis shows that either electrical or optical feedback can be the dominant cause for the NDR, depending upon their relative strengths. The NDR observed in the devices was caused primarily by electrical feedback since the optical feedback is weak. For low input power, avalanche breakdown appears to initiate the NDR in the devices although avalanching alone cannot cause NDR     

Solving electromagnetic problems using a novel symmetric FEM-BEM approach

This paper presents a novel symmetric finite element method-boundary element method (FEM-BEM) formulation for solving unbounded electromagnetic problems. The proposed method offers two very attractive features: 1) it is variational, leading to a symmetric system of equations and 2) the meshes for the computations of FEM and BEM can be nonconformal, leading to decoupled computations of FEM and BEM. The accuracy and efficiency of the method are studied for both electromagnetic radiation and scattering problems.     

Design Errors: Inefficiency or Carelessness of Designer?

Design defects are experienced in many projects; the difference is only in the extent of occurrence. This technical note discusses a design error case in a building project in Nepal, where the designer made the wrong assumptions in roof treatment work for waterproofing as well as for heat insulation purposes. From the investigation of the problem, it was found that the waterproofing polymer was not applied directly over concrete slab top. Use of heavy concrete block as a heat insulation material also helped to increase the leakage problem. The problem evoked loss of prestige for project officials, the design consortium, and the contractor.