Treatment with the oral growth hormone secretagogue MK-677 increases markers of bone formation and bone resorption in obese young males

The effect of 2 months of treatment with the oral growth hormone (GH) secretagogue MK-677 on markers of bone metabolism was determined in healthy obese male subjects. This was a randomized, double-blind, parallel, placebo-controlled study. Twenty-four healthy obese males, 19-49 years of age, with body mass index > 30 kg/m2 were treated with MK-677 (25 mg/day; n = 12) or placebo (n = 12) for 8 weeks. MK-677 increased markers of bone formation; a 23% increase in the carboxy-terminal propeptide of type I procollagen levels and a 28% increase in procollagen III peptide levels were seen with as little as 2 weeks of MK-677 treatment (p < 0.01 and p = 0.001 vs. placebo, respectively) while a 15% increase in serum levels of osteocalcin was not detected until 8 weeks of treatment (p < 0.01 vs. placebo). Markers of bone resorption were induced within 2 weeks of treatment with MK-677; serum levels of the carboxy-terminal cross-linked telopeptide of type I collagen were increased 26% at 8 weeks (p = 0.001 vs. placebo), and urine hydroxyproline/creatinine and calcium/creatinine ratios at 8 weeks were increased by 23% (p < 0.05 vs. placebo) and 46% (p < 0.05 vs placebo), respectively, MK-677 increased serum insulin-like growth factor binding protein-5 (IGFBP-5) by 43-44% after 2-8 weeks of treatment (p < 0.01 vs. placebo). Serum IGFBP-4 was increased by 25% after 2 weeks of treatment (p < 0.001 vs. placebo) but no significant change from baseline was observed after 8 weeks of treatment. Plasma interleukin-6 was not significantly changed by active treatment. In conclusion, short-term treatment of healthy obese male volunteers with the GH secretagogue MK-677 increases markers of both bone resorption and formation. Large increases in serum levels of IGF-1 and IGFBP-5 and a transient increase in serum IGFBP-4 were found. Future long-term studies are needed to investigate if prolonged treatment with MK-677 increases bone mass.     

Hexagonal (superlattice) form of Ga2Te3

Gallium telluride (Ga₂Te₃) was synthesized at different temperatures (850 to 460° C) using different cooling rates. Materials synthesized at higher temperatures (including quenched materials from the melt) always yielded zinc-blende lattice with well resolved _{1 2} doublet X-ray powder diffraction lines. In the material synthesized at lower temperature ( 460°C), we obtained additional (superlattice) lines as reported by Newman and Cundall [4]. It was possible to index these reflections not only on an orthorhombic unit cell (a=0.417, b=2.360, c=1.252 nm) but also on cubic (a=1.7678 nm) and hexagonal (a=0.832, c=3.065 nm) unit cells. To us, the hexagonal cell appears to be more realistic. If sufficient time is given to reach equilibrium, the whole of the zinc-blende form of Ga₂Te₃ is transformed to the hexagonal form. It has been further observed that conversion of the hexagonal into the cubic form and vice versa can be brought about by heating the material at temperatures greater or less than 460° C, respectively. Lastly, the zinc-blende phase of Ga₂Te₃ is metastable and slowly transforms to hexagonal form at room temperature.     

Noise analysis of double gate composite InAs based HEMTs for high frequency applications

Microsystem Technologies - The quantitative analysis of microwave noise available in the double gate (DG) high electron transistors of mobility (HEMT) is reported in this paper. For this analysis,...     

Electron transport in highly compensated,plastically bent,n-type InSb in the temperature range 4.2–300 K

Measurements of the Hall coefficient, dc electrical conductivity, and magnetoresistance have been made on two highly compensated, plastically bent,n-type InSb samples from liquid helium to room temperature. The number and Hall mobility of charge carriers and the electrical conductivity are greatly affected by plastic bending. The mobility decreases appreciably and the number of charge carriers increases in both the deformed samples. This increase of effective charge carriers can be attributed to the introduction of effective donor centers due to plastic bending. The electrical conductivity in one of the deformed samples increases between the temperature ranges 4.2–15 K and 125–190 K compared to that of the undeformed state of the sample. This unusual increase in is attributed to the large increase inn value. The magnetoresistance at 4.2 K is due to impurity-band conduction and is found to be positive. It shows approximately a linear variation with magnetic field in both the deformed samples. The observed behavior of the magnetoresistance at 300 K is consistent with the behavior expected for free electrons. The observed / at 77.4 K is found to be less than that at 300 K and is explained in terms of the Hall mobility values at these two temperatures.     

Rheology of Zirconia Suspensions in a Nonpolar Organic Medium

Three dispersants (stearic acid, oleic acid, and poly(12-hydroxystearic acid)) are compared for their ability to produce low-viscosity suspensions of zirconia in kerosene. Rheological measurements and sediment packing density measurements show that poly(12-hydroxystearic acid) is a better dispersant than stearic acid or oleic acid; this is explained in terms of the longer tail of the poly(12-hydroxystearic acid) surfactant molecule. The amount of dispersant can be optimized to reduce viscosity and yield point of the suspension, and to eliminate thixotropic hysteresis. The use of a dispersion medium of lower viscosity than the dispersant makes it easy to detect when complete monolayer coverage has been achieved. The loss of pseudoplasticity, brought about by a higher degree of deflocculation, can be recovered by increasing the volume fraction of solids of a suspension and this is beneficial in the plastic forming of ceramics. Rheological measurements showed that these suspensions reach a "critical state" above a critical shear stress (τ_c). This critical state is described by several parameters, i.e., the Bingham yield stress (τ_b), the plastic viscosity (ν_Pl), and the critical shear rate (γ_c), which are dependent on the volume fraction of solids.     

Active learning for on-road vehicle detection: a comparative study

In recent years, active learning has emerged as a powerful tool in building robust systems for object detection using computer vision. Indeed, active learning approaches to on-road vehicle detection have achieved impressive results. While active learning approaches for object detection have been explored and presented in the literature, few studies have been performed to comparatively assess costs and merits. In this study, we provide a cost-sensitive analysis of three popular active learning methods for on-road vehicle detection. The generality of active learning findings is demonstrated via learning experiments performed with detectors based on histogram of oriented gradient features and SVM classification (HOG–SVM), and Haar-like features and Adaboost classification (Haar–Adaboost). Experimental evaluation has been performed on static images and real-world on-road vehicle datasets. Learning approaches are assessed in terms of the time spent annotating, data required, recall, and precision.     

Direct Ink-Jet Printing of Vertical Walls

Direct jet printing can assemble ceramic powder into a three dimensional shape by firing droplets of ink through a nozzle to build a multiple layered structure. As with stereolithography and selective laser sintering, the surface texture is expected to witness the layered assembly. The ability to create vertical walls by direct ink-jet printing was explored using a test piece based on a maze. The structure and topography are discussed in terms of droplet spreading and drying.     

The performance of a hybrid routing intelligent algorithm in a mobile ad hoc network

End-to-end delay, power consumption, and communication cost are some of the most important metrics in a mobile ad hoc network (MANET) when routing from a source to a destination. Recent approaches using the swarm intelligence (SI) technique proved that the local interaction of several simple agents to meet a global goal has a significant impact on MANET routing. In this work, a hybrid routing intelligent algorithm that has an ant colony optimisation (ACO) algorithm and particle swarm optimisation (PSO) is used to improve the various metrics in MANET routing. The ACO algorithm uses mobile agents as ants to identify the most feasible and best path in a network. Additionally, the ACO algorithm helps to locate paths between two nodes in a network and provides input to the PSO technique, which is a metaheuristic approach in SI. The PSO finds the best solution for a particle’s position and velocity and minimises cost, power, and end-to-end delay. This hybrid routing intelligent algorithm has an improved performance when compared with the simple ACO algorithm in terms of delay, power consumption, and communication cost.     

A comparative study on the effect of promoter content of hydrodesulfurization catalysts at different evaluation scales

CoMo and NiMo supported Al₂O₃ catalysts have been investigated for hydrotreating of model molecule as well as industrial feedstock. Activity studies were carried out for thiophene and SRGO hydrodesulfurization (HDS) in an atmospheric pressure and batch reactor respectively. These activities on sulfided catalysts were evaluated as a function of promoter content [M/(M + Mo) = 0.30, 0.34, 0.39; M = Co or Ni] using fixed (ca. 8 wt.%) molybdenum content. The promoted catalysts were characterized by textural properties, XRD, and temperature programmed reduction (TPR). TPR spectra of the Co and Ni promoter catalysts showed that Ni promotes the easy reduction of Mo species compared with Co. With the variation of promoter content NiMo catalyst was found to be superior to CoMo catalyst for gas oil HDS, while at low-promoter content the opposite trend was observed for HDS of thiophene. The behavior was attributed to the several reaction mechanisms involved for gas oil HDS. A nice relationship was obtained for hydrodesulfurized gas oil refractive index (RI) and aromatic content, which corresponds to the Ni hydrogenation property.     

Synthesis and water absorbency of crosslinked superabsorbent polymers

A series of novel copolymer superabsorbents based on monomer acrylamide (AM), potassium methacrylate (KMA), and 2‐hydroxyethyl methacrylate (HEMA) were prepared by copolymerization using ammonium persulfate (APS) as an initiator and N,N‐methylenebisacrylamide (MBA) as a crosslinking agent. The synthetic variables (the monomer concentration, crosslinker concentration, and initiator concentration) were also studied. The experimental results of superabsorbent polymers (SAPs) show a better absorbency in both water and NaCl solutions. The copolymers were characterized by IR spectroscopy. The water retention in the soil was enhanced using the above superabsorbents. The use of SAPs for the growth of groundnut plants was also investigated. SAPs can be considered for water‐managing materials for agriculture and horticulture purposes in desert and drought‐prone areas. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1795–1801, 2002