Fractional Order GN Model on Photo-Thermal Interaction in a Semiconductor Plane

A mathematical model of Green–Naghdi photothermal theory based on fractional-order of heat transfer is given to study the wave propagation in a two-d     

Reflection and transmission coefficient of yttrium iron garnet filled polyvinylidene fluoride composite using rectangular waveguide at microwave frequencies

The sol-gel method was carried out to synthesize nanosized Yttrium Iron Garnet (YIG). The nanomaterials with ferrite structure were heat-treated at different temperatures from 500 to 1000 °C. The phase identification, morphology and functional groups of the prepared samples were characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR), respectively. The YIG ferrite nanopowder was composited with polyvinylidene fluoride (PVDF) by a solution casting method. The magnitudes of reflection and transmission coefficients of PVDF/YIG containing 6, 10 and 13% YIG, respectively, were measured using rectangular waveguide in conjunction with a microwave vector network analyzer (VNA) in X-band frequencies. The results indicate that the presence of YIG in polymer composites causes an increase in reflection coefficient and decrease in transmission coefficient of the polymer.     

Evaluation of alumina reinforced oil fly ash composites prepared by spark plasma sintering

The thermomechanical behavior of micro/nano-alumina (Al₂O₃) ceramics reinforced with 1-5 wt.% of acid-treated oil fly ash (OFA) was investigated. Composites were sintered using spark plasma sintering (SPS) technique at a temperature of 1400°C by applying a constant uniaxial pressure of 50 MPa. It was evaluated that the fracture toughness of micro- and nanosized composites improved in contrast with the monolithic alumina. Highest fracture toughness value of 4.85 MPam^1/2 was measured for the nanosized composite reinforced with 5 wt.% OFA. The thermal conductivity of the composites (nano-/microsized) decreased with the increase in temperature. However, the addition of OFA (1-5 wt.%) in nanosized alumina enhanced the thermal conductivity at an evaluated temperature. Furthermore, a minimum thermal expansion value of 6.17 ppm*K⁻¹ was measured for nanosized Al₂O₃/5 wt.% OFA composite. Microstructural characterization of Al₂O₃-OFA composites was done by x-ray diffraction and Raman spectroscopy. Oil fly ash particles were seen to be well dispersed within the alumina matrix. Moreover, the comparative analysis of the nano-/microsized Al₂O₃/OFA composites shows that the mechanical and thermal properties were improved in nanosized alumina composites.     

Expression of Main Toll-Like Receptors in Patients with Different Types of Colorectal Polyps and Their Relationship with Gut Microbiota

Abnormal activation of Toll-like receptor (TLRs) signaling can result in colon cancer development. The aim of this study was to investigate the expression of important TLRs in different histological types of colorectal polyps and evaluate their relationship with intestinal microbiota. The expression levels of TLR2, 3, 4, and 5 were analyzed in intestinal biopsy specimens of 21 hyperplastic polyp (HP), 16 sessile serrated adenoma (SSA), 29 tubular adenoma (TA), 21 villous/tubulovillous (VP/TVP) cases, and 31 normal controls. In addition, selected gut bacteria including Streptococcus bovis, Enterococcus faecalis, Enterotoxigenic Bacteroides fragilis (ETBF), Fusobacterium nucleatum, Porphyromonas spp., Lactobacillus spp., Roseburia spp., and Bifidobacterium spp. were quantified in fecal samples using absolute qRT PCR, and, finally, the association between TLRs and these gut microbiota- was evaluated by Spearman’s correlation coefficient. Higher expression of TLR2 and TLR4 in VP/TVP and TA, and lower expression levels of TLR3 and TLR5 in all type of polyps were observed. The differences in TLR expression patterns was not only dependent on the histology, location, size, and dysplasia grade of polyps but also related to the intestinal microbiota patterns. TLR2 and TLR4 expression was directly associated with the F. nucleatum, E. faecalis, S. bovis, Porphyromonas, and inversely to Bifidobacterium, Lactobacillus, and Roseburia quantity. Furthermore, TLR3 and TLR5 expression was directly associated with Bifidobacterium, Roseburia, and Lactobacillus quantity. Our results suggest a possible critical role of TLRs during colorectal polyp progression. An abnormal regulation of TLRs in relation to gut microbial quantity may contribute to carcinogenesis.     

Investigating the effect of zirconium-based and titanium-based metal–organic frameworks nanoparticles on the performance of polysulfone hollow fiber mixed matrix membrane for dialysis application

This study aims to investigate polysulfone (PSF) mixed matrix membranes (MMMs) properties containing zirconium-based and titanium-based metal–organic frameworks (MOFs). for hemodialysis application. The nanoparticles were synthesized, and the membranes were produced by the phase inversion method. Membrane characterization conducted by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), field emission Scanning electron microscope (FE-SEM), energy-dispersive x-ray analysis (EDX), transmission electron microscopy (TEM), x-ray diffraction (XRD), and atomic force microscopy (AFM) confirmed the presence of MOF nanoparticles. Also, the evaluation of the specific surface area of nanoparticles was done by BET. The water contact angle reduced from 64.4° to 51.2°, indicating the hydrophilicity improvement, enhancing the pure water flux from 46.8 L/m²h for the pristine membrane to 76.7 L/m2h for the pristine membrane M₄. The total fouling resistance decreased from 30% to 21%, and the bovine serum albumin (BSA) adsorption of modified membranes was lower than that of the pristine membrane. Urea and creatinine were cleared significantly for modified ones, up to 82.6% and 72.1%, respectively, and all membranes showed BSA retention of more than 93%. A comparison between MMMs that contained UIO-66-NH₂ and MIL-125-NH₂ showed that the former had a better effect on the performance. M₄ had better results, indicating high water flux, the lowest fouling resistance, high porosity, lower BSA adsorption, proper clearance for urea and creatinine, and 94.2% BSA retention.     

Al2O3 Colloidal Nanocrystals with Strong UV Emission

A facile sol–gel procedure has been developed for the synthesis of colloidal alumina nanocrystals. For the first time, optical characterization procedures were employed to study the quantum confinement effects in optical properties of the prepared Al₂O₃ sol. Accordingly, the hyperbolic band model was used to determine the optical band gap of colloidal alumina nanocrystals. X‐Ray diffraction pattern was used to study the crystallographic phase of the dried gel. Morphological characterization was performed using scanning electron microscopy (SEM). Inductively Coupled Plasma (ICP) emission spectroscopy was used to determination purity of the Al₂O₃ powder. High‐resolution TEM showed that the diameter of colloidal nanocrystals is about 10 nm. Photoluminescence spectroscopy demonstrated that quantum yields for colloidal nanocrystals are 68% with 300 nm excitation wavelength. The experimental observations confirm that highly stable alumina sol with strong UV emission was synthesized. The mentioned optical properties have not been reported before.     

Polyhydroxybutyrate/chitosan/bioglass nanocomposite as a novel electrospun scaffold: fabrication and characterization

Scaffolds and their features play a central role in tissue engineering; so this study is based on the production of a series of electrospun PHB/Chitosan/nBG nanocomposite scaffolds with 9 wt% polyhydroxybutyrate, 10, 15 and 20 wt% chitosan and 7.5, 10 and 15 wt% nanobioglass (nBG). Electrospinning process was performed with optimal conditions of spinning machine including voltage of 16 kV, syringe-collector spacing of 16 cm, and output rate of 1 µl per hour. The developed phases and the formation of chemical bonds between ceramic and polymer bands were studied through XRD and FTIR analyses. The FE-SEM and TEM analyses showed uniform morphology of nanofibers and dispersion of bioglass nanoparticles in the fiber structure. The presence of 10 wt% bioglass nanoparticles and 15 wt% chitosan increased the tensile strength of fibers to 3.42 MPa, which was about four times greater than strength of control sample (pure PHB). The developed fibers were kept 28 days in SBF solution and 60 days in PBS solution to assess their bioactivity and biodegradability. The results showed that the presence of bioglass nanoparticles leads to a dramatic increase in absorption of calcium and phosphorus ions and weight loss of scaffold. The developed scaffold can be used for bone and teeth tissue engineering applications.     

The effect of soda bagasse lignin modified by ionic liquids on properties of the urea–formaldehyde resin as a wood adhesive

The aim of this research was to investigate the influence of lignin modified by ionic liquids on physical and mechanical properties of plywood panels bonded with the urea–formaldehyde (UF) resin. For this purpose, soda bagasse lignin was modified by the 1-ethyl-3-methylimidazolium acetate ([Emim][OAc]) ionic liquid and then the various contents of unmodified and modified lignins (10, 15, and 20%) were added at pH=7 instead of second urea during the UF resin synthesis. The physicochemical properties of the prepared resins as well as the water absorption, shear strength, and formaldehyde emission of the plywood panels made with these adhesives were measured according to standard methods. According to Fourier Transform Infrared (FTIR) Spectrometry, by treatment of lignin, the C=O, C–C, and C–H bonds decrease while the content of the C–N bond dramatically increases. Based on the finding of this research, the performance of soda bagasse lignin in UF resins dramatically improves by modification by ILs; as the resins with modified lignin yielded lower formaldehyde emission and water absorption when compared to those made from unmodified lignin and commercial UF adhesives, respectively. The shear strength as well as wood failure percentages are lower for the panels produced with modified lignin than for the panels produced with UF resins alone.