Annealing effects on the optical and morphological properties of ZnO nanorods on AZO substrate by using aqueous solution method at low temperature

Vertically aligned ZnO nanorods (NRs) on aluminum-doped zinc oxide (AZO) substrates were fabricated by a single-step aqueous solution method at low temperature. In order to optimize optical quality, the effects of annealing on optical and structural properties were investigated by scanning electron microscopy, X-ray diffraction, photoluminescence (PL), and Raman spectroscopy. We found that the annealing temperature strongly affects both the near-band-edge (NBE) and visible (defect-related) emissions. The best characteristics have been obtained by employing annealing at 400°C in air for 2 h, bringing about a sharp and intense NBE emission. The defect-related recombinations were also suppressed effectively. However, the enhancement decreases with higher annealing temperature and prolonged annealing. PL study indicates that the NBE emission is dominated by radiative recombination associated with hydrogen donors. Thus, the enhancement of NBE is due to the activation of radiative recombinations associated with hydrogen donors. On the other hand, the reduction of visible emission is mainly attributed to the annihilation of OH groups. Our results provide insight to comprehend annealing effects and an effective way to improve optical properties of low-temperature-grown ZnO NRs for future facile device applications.     

Influence of Some Hofmeister Anions on the Krafft Temperature and Micelle Formation of Cetylpyridinium Bromide in Aqueous Solution

In this work, the effect of some Hofmeister anions on the Krafft temperature (T_K) and micelle formation of cetylpyridinium bromide (CPB) have been studied. The results show that more chaotropic anions increase, while the less chaotropic ones lower the T_K of the surfactant. More chaotropic I^? and SCN^? form contact ion pairs with the cetylpyridinium ion and reduce the electrostatic repulsion between the CPB molecules. As a result, these ions show salting‐out behavior, with a consequent increase in the T_K. In contrast, less chaotropic Cl^? and NO₃^? increase the activity of free water molecules and enhance hydration of CPB molecules, showing a decrease in the T_K. A rather unusual behavior was observed in the case of SO₄^2? and F^?. These strong kosmotropes shift from their usual position in the Hofmeister series and behave like moderate chaotropes, lowering the T_K of the surfactant. Because of the high charge density and the strong tendency for hydration these ions preferentially remain in the bulk. Rather than forming contact ion pairs, these ions stay away from the CPB molecules, decreasing the T_K of the surfactant. In term of decreasing the T_K, the ions follow the order NO₃^? > SO₄^2? > Cl^? > F^? > Br^? > SCN^? > I^?. The critical micelle concentration (CMC) of the surfactant decreases significantly in the presence of these ions due to the screening of the micelle surface charge by the excess counterions. The decreasing trend of the CMC in the presence of the salts follows the order SCN^? > I^? > SO₄^2? > NO₃^? > Br^? > Cl^? > F^?.     

Preparation and characterizations of activated carbon from kenaf fiber for equilibrium adsorption studies of copper from wastewater

The potential of activated carbon prepared from kenaf fiber (KF) to remove copper (II) from aqueous effluents was investigated. The fibers were first semi-carbonized, then impregnated with potassium hydroxide (KOH) and finally activated by using carbon dioxide (CO₂) gas to produce activated carbon. Pore structure and physical characteristics of the prepared kenaf fiber activated carbon (KFAC) were determined. Adsorption studies for divalent copper (Cu) ions were carried out to delineate the effect of contact time, temperature, pH and initial metal ion concentration on equilibrium adsorption capacity. The experimental data followed pseudo-second-order kinetics and Elovich Model than pseudo-first-order. Langmuir, Freundlich and Temkin models were implemented to analyze the parameters for adsorption at 30 °C, 50 °C and 70 °C. Thermodynamic parameters such as ??G ^o , ??H ^o and ??S ^o which represent Gibbs free energy, enthalpy and entropy, respectively, were evaluated. It was concluded that activated carbon from kenaf fiber (KFAC) can be used as an efficient adsorbent for removal of Cu (II) from synthetic wastewater.     

Physiochemical Properties of <Emphasis Type="Italic">Jatropha curcas</Emphasis> Seed Oil from Different Origins and Candidate Plus Plants (CPPs)

The physicochemical properties of Jatropha seed oil from 9 geographical origins and 24 candidate plus plants (CPPs) were evaluated. The yield of seed oil obtained by Soxhlet extraction using n-hexane as solvent varied from 40.0% (Malaysia) to 48.4% (Vietnam) among seeds from different origins and 32.1% (CPP-17) to 48.8% (CPP-01) (w/w) among CPPs. Density, specific gravity, and refractive index of oil showed very little differences among all the seed sources. Oil from Borneo had the highest free fatty acid (FFA) content (2.3%) and a South African sample had the lowest FFA (0.4%), as oleic acids. Seed oil of CPP-13 had the highest FFA content (1.2%) and seed oil of CPP-17 the lowest (0.3%). Most of the CPPs in this study had an FFA content of less than 1%. Jatropha seed oil of Philippine origin had the highest iodine value (187.3 mg/g oil) and seed oil from Borneo the lowest (83.5 mg/g oil). The lowest saponification values were obtained from seed oil of Philippine origin (189.5 mg KOH/g) and CPP-22 (183.3 mg KOH/g oil) from Malaysia. The maximum higher heating value (40.3 MJ/kg) was obtained from seed oil from Borneo. The cetane numbers range from 25.4 (Indonesia) to 56.0 (Borneo) among the oils of base material and 46.4 (CPP-15) to 53.7 (CPP-06) among CPPs. This study gives basic information of relevance for biodiesel production using Jatropha seeds from various origins.     

Prediction and sensitivity analysis of CNTs-modified asphalt’s adhesion force using a radial basis neural network model

Abstract

The expected longer service life of modified asphalt can be jeopardized by different environmental factors, such as moisture, oxidation, etc. which affect the desired properties by altering the adhesive property. An insight into knowledge of the adhesive property of the asphalt can help in providing more durable asphalt pavement. The study attempted to develop different models of adhesive properties of polymers and carbon nanotubes (CNTs) modified asphalt binders. The polymer-CNT modified asphalt is processed to prepare different types of samples, by simulating the damage due to moisture and oxidization, following the corresponding standard method. An Atomic Force Microscopy (AFM) was employed to assess the nanoscale adhesion force of the tested samples following the existing functional group in asphalt. Finally, the study has developed Radial Basis Function Neural Network (RBFNN) as a function of different parameters including; asphalt chemistry (i.e. AFM tip type and constant), type and percentages of polymers and CNTs and different environmental exposures (oxidation, moisture, etc.) to predict the nano adhesion force of asphalt. It is observed that the adhesive property of the Styrene–Butadiene modified asphalt is more consistent compared to the Styrene–Butadiene–Styrene modified asphalt, while the presence of Single-Wall Nanotubes (SWNT) is observed to affect the adhesive properties of asphalt significantly as compared to Multi-Wall Nanotubes (MWNT). The higher accuracy level of RBFNN model also indicates that the functional group (tip-type) adding with the percentages and types of polymers and CNTs significantly affect the adhesive properties of asphalt.     

Synthesis and Characterization of Privileged Monodentate Phosphoramidite Ligands and Chiral Brønsted Acids Derived from d-Mannitol

The synthesis of several novel chiral phosphoramidite ligands (L1–L8) with C₂ symmetric, pseudo C₂ symmetric secondary amines and chiral Brønsted acids 1a,b has been achieved. These chiral auxiliaries were obtained from commercially available d-mannitol, and secondary amines in moderate to excellent yields. Excellent diastereoselectivites of ten chiral auxiliaries were obtained. The chiral phosphoramidite ligands and chiral Brønsted acids were fully characterized by spectroscopic methods.     

Generation and characterization of a novel recombinant antibody against 15-ketocholestane isolated by phage-display

The employment of monoclonal antibodies (Mabs) to identify disease-associated biomarkers in clinical samples represents the underlying principle for many diagnostic tests. To date, these have been principally developed for protein targets with few reported applications for lipids due to their hydrophobicity and poor immunogenicity. Oxysterols represent a family of lipids implicated in diverse human diseases where Mab-based detection assays could have a profound effect on their utility as clinical biomarkers. These are usually identified in patients' samples by mass- spectrometry based approaches. Here, we describe an antibody phage-library based screening methodology for generating a recombinant monoclonal antibody (RAb) targeting the oxysterol-15-ketocholestane (15-KA), a lipid implicated in multiple sclerosis and Autoimmune Encephalomyelitis (EAE). The antibody is highly specific for 15-KA and shows little or no binding activity for other closely related oxysterols. We employ RAb2E9 to address the controversy over whether 15-KA is a true biomarker for MS/EAE and show that 15-KA is undetectable in serum taken from mice with EAE using antibody based detection methodologies; a finding confirmed by mass-spectrometry analysis. This study demonstrates the technical feasibility of using phage display to isolate highly specific antibodies against poorly immunogenic, small molecule lipids.     

Influence of Different Additives on the Interaction of Quinolone Antibiotic Drug with Surfactant: Conductivity and Cloud Point Measurement Study

Conductometric and cloud point (CP) measurement studies have been performed to investigate the interaction of tetradecyltrimethylammonium bromide (TTAB) and Triton® X-100 (TX-100) with ciprofloxacin hydrochloride (CFH) in different solvents over the temperature range of 295.15–315.15 K. CFH is used for the treatment of various bacterial infections. The observed critical micelle concentration (CMC) values of TTAB were found to be reduced in the presence of electrolytes (Na₂SO₄/Na₃PO₄), and this reduction proceeds with the elevation of salt concentration. The order of the CMC of TTAB follows the trend: > >. The observed CMC values of TTAB were found to increase with increasing temperature and decrease with increasing concentration of CFH in aqueous medium. The values of Gibbs free energy of micellization () for the TTAB/TTAB + CFH mixture were found to be negative, implying spontaneous micellization. The estimated CP of TX-100 decreases with increasing concentration of TX-100 in aqueous medium. The CP values first decrease with increasing concentration of CFH and then increase at higher concentration of CFH almost in all cases investigated. The values of free energy of clouding were found to be positive in all cases studied implying that phase separation of TX-100 was nonspontaneous. The other thermodynamic parameters associated with the micellization of TTAB and the phase separation of TX-100 were estimated and explained.     

Effects of zinc oxide on pretreated multiwalled‐carbon‐nanotube‐reinforced biobased polyesters

In this study, the effects of the incorporation of microsized zinc oxide (ZnO) on multiwalled carbon nanotube (MWCNT)‐reinforced palm‐oil‐based polyester (POPE) were investigated in terms of the UV absorbability, mechanical strength, thermal stability, surface resistivity, and morphology. POPE was prepared by alcoholysis and an esterification process with glycerol, palm oil, and phthalic anhydride. The MWCNTs were dispersed into POPE under in situ conditions during the esterification reaction, whereas ZnO was distributed into the MWCNT‐filled POPE resin with an ultrasound technique. The surface morphology was examined to understand the dispersion of the fillers inside the polymer matrix with field emission scanning electron microscopy. In addition, UV absorbability was observed with a UV–visible spectrophotometer. From the results analysis, the surface resistivity was found to be unchanged by the presence of the ZnO particles. In addition, incorporation of ZnO improved the UV absorbability. Moreover, the tensile strength of the ZnO‐based POPE was found to be slightly lower compared with that of the MWCNT‐filled POPE. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44627.     

Solvothermal synthesis of greigite (Fe3S4)– Conducting polypyrrole nanocomposite and its application towards arsenic removal

In the present investigation, Greigite-conducting polypyrrole nanocomposite (GPPy nanocomposite) was prepared, characterized and used to remove arsenite and arsenate from aqueous solution. Fe₃S₄ was synthesized using solvothermal synthetic method and it was grafted to conducting polypyrrole matrix. The nanocomposite was characterized using FE-SEM, EDX, XRD, FTIR, TGA/DSC and BET surface area. Kinetic studies revealed that the removal process followed first order kinetics. Batch isotherm studies were performed to determine the binding capacity. Thermodynamic parameters were also computed and it indicated the spontaneous nature of the process. Electrophoretic studies were carried out to determine the point of zero charge.