A comparative study of microbubble generation by mechanical agitation and sonication

As focus on the potential applications of microbubbles increases, information about the efficiency of generation methods and their effects on the properties and stability of microbubbles is crucial in the selection of an appropriate method to generate microbubbles with the desired properties. This paper evaluates the generation efficiencies of two commonly used methods, mechanical agitation and sonication, in two surfactant systems. The results demonstrated that sonication was more effective than mechanical agitation in the generation of microbubbles in terms of higher gas hold-up, smaller bubble size, and larger interfacial area. Analysis of the changes in bubble size over time revealed that the existence of a critical diameter for the shrinkage of microbubbles. The behavior of microbubbles and the critical diameter depended on the generation method employed and the surfactant used.

Industrial relevance

Microbubble technology has gradually become accepted as a cost-effective and environmentally friendly technology with great potential within almost every field of the food industry. Selection of a suitable method to generate microbubbles with the desired properties is crucial. Mechanical agitation and sonication are two commonly used methods for microbubble generation. However, systematic information on their generation efficiency and effects on the properties of microbubbles is not available. Thus, a comparative study was conducted in this paper.     

Cytoskeletal architecture of neuromuscular junction: Localization of vinculin

Cytoskeletons underneath the postsynaptic membrane of neuromuscular junctions were studied by using a quick-freeze deep-etched method and immunoelectron microscopy of ultrathin frozen sections. In a quick-freeze deep-etched replica of fresh, unfixed muscles, 8.9 ± 1.5-nm particles were present on the true postsynaptic membrane surface. Underneath this receptor-rich postsynaptic membrane, networks of fine filaments were observed. These cytoskeletal networks were more clearly observed in extracted samples. In these samples, diameters of the filaments which formed networks were measured. In the platinum replica, three kinds of filament were recognized—12 nm, 9 nm, and 7 nm in diameter. The 12-nm filament seemed to correspond to the intermediate filament. The other two filaments formed meshworks between intermediate filaments and plasma membrane. In ultrathin frozen sections vinculin label was localized just beneath the plasma membrane. Thirty-six percent of the label was within 18 nm from the cytoplasmic side of the plasma membrane and 50% was within 30 nm. Taking the size of the vinculin molecule into account, it was concluded that vinculin is localized just beneath the plasma membrane and might play some role in anchoring filaments which formed meshworks underneath the plasma membrane.     

Filtration coefficients and physical properties of fluids for osmotic action

In the present study, the filtration coefficient of an acetyl cellulose tubular‐type osmotic membrane is measured with two methods using reverse osmosis and osmosis processes. In addition, the effects of temperature and concentration on the physical properties of fluids needed for studies on osmosis are examined using sodium chloride, potassium chloride, sucrose, and polyethylene glycol 600 aqueous solutions as test fluids. As a result, a new method for measuring the filtration coefficient for osmosis is proposed. Moreover, the present study reveals that little difference exists between the filtration coefficients for these processes. In addition, relations for estimating mass diffusivities, osmotic coefficients, viscosities, and densities of fluids are presented. © 1999 Scripta Technica, Heat Trans Asian Res, 29(1): 72–90, 2000     

Transient charge-masking effect of applied voltage on electrospinning of pure chitosan nanofibers from aqueous solutions

The processing of a polyelectrolyte (whose functionality is derived from its ionized functional groups) into a nanofiber may improve its functionality and yield multiple functionalities. However, the electrospinning of nanofibers from polyelectrolytes is imperfect because polyelectrolytes differ considerably from neutral polymers in their rheological properties. In our study, we attempt to solve this problem by applying a voltage of opposite polarity to charges on a polyelectrolyte. The application of this ‘countervoltage’ can temporarily mask or screen a specific rheological property of the polyelectrolyte, making it behave as a neutral polymer. This approach can significantly contribute to the development of new functional nanofiber materials.     

Rattle‐Type Fe3O4@SiO2 Hollow Mesoporous Spheres as Carriers for Drug Delivery

Rattle‐type Fe₃O₄@SiO₂ hollow mesoporous spheres with different particle sizes, different mesoporous shell thicknesses, and different levels of Fe₃O₄ content are prepared by using carbon spheres as templates. The effects of particle size and concentration of Fe₃O₄@SiO₂ hollow mesoporous spheres on cell uptake and their in vitro cytotoxicity to HeLa cells are evaluated. The spheres exhibit relatively fast cell uptake. Concentrations of up to 150 µg mL^?1 show no cytotoxicity, whereas a concentration of 200 µg mL^?1 shows a small amount of cytotoxicity after 48 h of incubation. Doxorubicin hydrochloride (DOX), an anticancer drug, is loaded into the Fe₃O₄@SiO₂ hollow mesoporous spheres, and the DOX‐loaded spheres exhibit a somewhat higher cytotoxicity than free DOX. These results indicate the potential of Fe₃O₄@SiO₂ hollow mesoporous spheres for drug loading and delivery into cancer cells to induce cell death.     

Vortex Dynamics in hcp Solid 4He

The peculiar features noted in (Penzev et al. in Phys. Rev. Lett. 101: 065301, 2008) we conjecture are evidence of a vortex fluid state in solid He. We suggest to analyze this state by means of the dynamics of quantized vortices, as used for the tangle of vortices in superfluid turbulence. We introduce parameters of the vortex tangle dynamics, e.g., relaxation time for the drift of lines in parallel to the torsional oscillation axis. We briefly discuss the transition from the supposed vortex fluid state into the supposed supersolid state (Shimizu et al. in Phys. Rev. Lett., arXiv:0903.1326).     

Microfabrication of U-Shaped Grooves on the Surface of BaO–TiO2–GeO2 Glass by YAG Laser Irradiation and Selective Chemical Etching

A combination technique of Nd:YAG laser (wavelength: 1064 nm) irradiations and chemical etchings was applied to fabricate microsize U-shaped grooves on the surface of CuO-doped BaO–TiO₂–GeO₂ glass, and chemical etching behaviors were examined by using a confocal scanning laser microscope. Continuous-wave Nd:YAG lasers with a power of 0.7–0.8 W were irradiated onto the glass surface and scanned at a speed of 10 μm/s, inducing structural modified lines with refractive index changes. The chemical etching rates for the refractive index changed lines in a nitric acid solution (1 N HNO₃) were larger than those for the base glass (nonirradiated part). The etching profile was changed gradually from W-shaped to U-shaped grooves with increasing etching time. The sharp bending lines with an angle of 150° and the cross-linked lines were also smoothly etched. The U-shaped grooves with a surface covered by nonlinear optical Ba₂TiGe₂O₈ crystals were formed by the crystallization of etched samples. This study proposes that the patterning of microchannels with optical functional surfaces is possible on the glass surface using the present technique.     

Synthesis and application of fluorescein- and biotin-labeled molecular probes for the chemokine receptor CXCR4

The design, synthesis, and bioevaluation of fluorescence- and biotin-labeled CXCR4 antagonists are described. The modification of D-Lys8 at an epsilon-amino group in the peptide antagonist Ac-TZ14011 derived from polyphemusin II had no significant influence on the potent binding of the peptide to the CXCR4 receptor. The application of the labeled peptides in flow cytometry and confocal microscopy studies demonstrated the selectivity of their binding to the CXCR4 receptor, but not to CXCR7, which was recently reported to be another receptor for stromal cell-derived factor 1 (SDF-1)/CXCL12.     

Fabrication of polymer thin films with in-depth dye-dispersed structures by the vacuum spray method

We report the fabrication of polymer thin films with “in-depth” dye-dispersed structures using a vacuum spray method. Copper (II) 2,9,16,23-tetra-tert-butyl-29H,31H-phthalocyanine [(t-Bu)₄CuPc] and polycarbonate in chloroform solution were sprayed onto the substrate. The (t-Bu)₄CuPc distribution was controlled precisely during thin film growth by varying its concentration in the solution. Uniform, bilayer, and gradient structures of (t-Bu)₄CuPc dispersed in thin films were confirmed by high-angle annular dark field imaging on scanning transmission electron microscopy. The vacuum spray method has several advantages compared to the casting method, such as smaller dispersed dye-aggregates and lack of cavities due to air bubbles.     

Complete genome sequence and characterization of the N-acylhomoserine lactone-degrading gene of the potato leaf-associated Solibacillus silvestris

N-Acylhomoserine lactones (AHLs) are used as quorum-sensing signal molecules by many gram-negative bacteria. We have reported that Solibacillus silvestris, which was isolated from the potato leaf, has AHL-degrading activity. To identify the AHL-degrading gene, whole genome sequencing of S. silvestris StLB046 was performed by using pyrosequencing technology. As the result of the BLAST search, one predicted ORF (ahlS) showed slight similarity to AiiA-like AHL lactonase from Bacillus cereus group. Escherichia coli harboring the ahlS-expressing plasmid showed high AHL-degrading activity. The ahlS-cording region was also amplified by PCR from the other potato leaf-associated and AHL-degrading S. silvestris strains. Purified AhlS as a maltose binding fusion protein showed high AHL-degrading activity and catalyzes AHL ring opening by hydrolyzing lactones. In addition, expression of ahlS in plant pathogen Pectobacterium carotovorum subsp. carotovorum attenuated maceration of the potato slices. Our results suggest that AHL-degrading activity of ahlS might perform useful functions such as useful biocontrol agents.