Allelopathic Effects of Volatile Monoterpenoids Produced by <Emphasis Type="Italic">Salvia leucophylla</Emphasis>: Inhibition of Cell Proliferation and DNA Synthesis in the Root Apical Meristem of <Emphasis Type="Italic">Brassica campestris</Emphasis> Seedlings

Salvia leucophylla, a shrub observed in coastal south California, produces several volatile monoterpenoids (camphor, 1,8-cineole, -pinene, -pinene, and camphene) that potentially act as allelochemicals. The effects of these were examined using Brassica campestris as the test plant. Camphor, 1,8-cineole, and -pinene inhibited germination of B. campestris seeds at high concentrations, whereas -pinene and camphene did not. Root growth was inhibited by all five monoterpenoids in a dose-dependent manner, but hypocotyl growth was largely unaffected. The monoterpenoids did not alter the sizes of matured cells in either hypocotyls or roots, indicating that cell expansion is relatively insensitive to these compounds. They did not decrease the mitotic index in the shoot apical region, but specifically lowered mitotic index in the root apical meristem. Moreover, morphological and biochemical analyses on the incorporation of 5-bromo-2-deoxyuridine into DNA demonstrated that the monoterpenoids inhibit both cell-nuclear and organelle DNA synthesis in the root apical meristem. These results suggest that the monoterpenoids produced by S. leucophylla could interfere with the growth of other plants in its vicinity through inhibition of cell proliferation in the root apical meristem.     

Sulfur exchange on Co---Mo/Al2O3 hydrodesulfurization catalyst using S radioisotope tracer

A commercial Co---Mo/Al₂O₃ catalyst was labeled with the radioisotope ³⁵S in hydrodesulfurization (HDS) of ³⁵S-labeled dibenzothiophene (³⁵S-DBT) in a high-pressure flow reactor at 50 kg/cm². Then, HDS of 4-methyldibenzothiophene (4-MDBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT) or sulfur exchange of H₂S were carried out on the labeled catalyst at 50 kg/cm² and 260–360°C. The amounts of labile sulfur participating in the reaction were determined from the radioactivity of ³⁵S---H₂S released from the ³⁵S-labeled catalyst. In the HDS reactions, the amount of labile sulfur participating in the reaction decreased in the order: DBT> 4-MDBT> 4,6-DMDBT. In the sulfur exchange reaction with H₂S, the adsorption of H₂S on the catalyst reached saturation above a H₂S partial pressure of 0.36 kg/cm². It was suggested that the release of H₂S from the labile sulfur may be the rate determining step of the HDS reaction.     

Synthesis of poly(tetrahydrofuran-b-ε-caprolactone) macromonomer via the Sml2-induced transformation

Summary A novel well-defined macromonomer consisting of different types of monomers in polymerization mechanisms was synthesized for the first time through the SmI₂-induced transformation. The macromonomer, -methacryloylpoly-(tetrahydrofuran-b--caprolactone), was prepared by the reaction of methacryloyl chloride with living poly(tetrahydrofuran-b--caprolactone) [poly(THF-b-CL)] which was obtained by the two-electron reduction of the cationic growing center of poly(THF) by samarium iodide (SmI₂) followed by the polymerization of CL. ¹H NMR analysis indicated the quantitative introduction of the methacryloyl group onto the polymer end. The molecular weight distribution of the macromonomer was relatively narrow, and the unit ratio of THF to CL could be controlled by both polymerization time of THF and the amount of CL, resulting from the living nature of both CL- and THF-polymerizations. Radical copolymerization of the produced macromonomers with methyl methacrylate in the presence of AIBN resulted in a polymethacrylate backbone grafted with poly(THF-b-CL) block copolymers.     

Effect of zeolite in surface discharge plasma on the decomposition of toluene

Toluene was decomposed in a surface discharge plasma reactor packed with various zeolites. The positioning effect of the zeolite bed was also investigated Reactor-B, in which the zeolite bed was located upstream, performed much better than Reactor-A, in which the zeolite bed was located downstream. Furthermore, the decomposition efficiency in Reactor-B increased with the capacity for toluene adsorption on zeolite, while that in Reactor-A did not. The toluene adsorbed in micropores was not decomposed effectively by direct electron impact, but was decomposed by active oxygen species generated in the plasma zone on the zeolite surface. A good correlation was also observed between toluene decomposition and ozone consumption in the downward-type reactor.     

Application of polymerizable surfactant in the preparation of polystyrene/nano-Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> composite

Monooctadecyl maleate, as a polymerizable surfactant, was synthesized by the mono-esterification of maleic anhydride and octadecanol, and was utilized to surface-modify nano-Fe₃O₄ particles. A polymerizable magnetic fluid was obtained by directly dispersing modified nano-Fe₃O₄ particles into styrene monomer, and the polystyrene/nano-Fe₃O₄ composite was prepared through free radical polymerization of polymerizable magnetic fluid. The structure and dispersion status in different dispersion phases of modified nano-Fe₃O₄ particles were studied by Fourier transform infrared (FTIR) spectrometry, X-ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. The experimental results show that the nano-Fe₃O₄ particles modified by monooctadecyl maleate with the size of about 7–10 nm can be uniformly dispersed into styrene and fixed in the composite during the procedure of polymerization. Thermogravimetric analysis (TGA) and vibrating sample magnetometry (VSM) indicate that the thermal stability of polystyrene/nano-Fe₃O₄ composite is improved compared to that of pure polystyrene, and the composite is a sort of superparamagnetic materials.     

Preparation of highly crystalline nanofibers on Fe and Fe-Ni catalysts with a variety of graphene plane alignments

The present study confirmed that highly crystalline nanofibers with controlled structure may be prepared over Fe and Fe-Ni alloy catalysts. The degree of graphitization of various carbon nanofibers (CNFs) was analyzed by using C(0 0 2) peaks from the XRD profiles. The C(0 0 2) peaks of CNFs over Fe catalyst shifted to higher angle and became narrower as the preparation temperature increased from 560 to 620 °C. Tubular CNFs prepared at temperature higher than 630 °C showed lower 2θ angles compared to those of platelet fibers. CNFs prepared over Fe-Ni catalysts tended to resemble those prepared over Fe catalysts. The degree of graphitization of platelet CNFs resembled natural graphite, while d_0 0 2 of the tubular CNFs showed values below the 3.39 Å reported as a theoretical minimum for a cylindrical alignment. Lc_0 0 2 of platelet and tubular CNFs increased by heat treatment at 2000 and 2800 °C though d_0 0 2 changed little. A transverse section of platelet and tubular CNFs had a hexagonal shape, not a round shape. The hexagonal column allows AB stacking of hexagonal planes that can give perfect hexagonal alignment.     

Hydrogen entry into steel during atmospheric corrosion process

Hydrogen entry and permeation into iron were measured by an electrochemical method during atmospheric corrosion reaction. The hydrogen permeation was enhanced on passive films because the hydrogen adsorption increased by the hydrogen evolution mechanism which is different from that on a bear iron surface. The permeation rate during a wet and dry corrosion cycle showed a maximum in the drying process depending upon the surface pH and the corrosion potential. The pollutant such as Na₂SO₃ which decreases the pH and the corrosion potential causes an increase in the permeation rate. The mechanism of the change in the permeation rate during the wet and dry cycles is explained by the polarization diagram of the electrode covered by thin water layer.     

Gas barrier properties and periodically fractured surface of thin DLC films coated on flexible polymer substrates

Thin DLC films coated on polymer surfaces are attracting considerable attention due to their wide applications and their interesting surface properties. When DLC films were coated on polymers, the resulting DLC-polymer composites are highly functionalized materials, some of which presenting dramatically improved gas barrier properties.In this paper, we will introduce several commonly used polymers including polyethylene terephthalate (PET), polyethylene (PE) and polypropylene (PP) for semi-crystalline polymers, and polymethyl methacyrlate (PMMA) for an amorphous polymer. The polymers were coated with thin DLC films and the gas barrier properties of the resulting DLC-polymer composites were investigated. Some of the DLC-polymer composites dramatically improved their gas barrier properties while they presented horizontal crack lines and vertical micro-buckling lines on the DLC surface when stretched to a certain strain. The gas barrier properties of the DLC-polymer composites with fractured DLC surface were also studied. It was found that the gas barrier property of the polymer substrates with lower residual strains was less damaged, when the substrates were mechanically deformed, than that of the polymer substrates with higher residual strains. When the number of the cracks increases, the strain imposed on each crack decreases, since the overall deformation is almost equally distributed to each crack while the crack spacing of each crack becomes shorter. Thus, it was found that the degradation of the gas barrier property after mechanical deformation is dependent on the residual strain of the polymers and the number of cracks on DLC films.     

Mechanical properties of porous titanium compacts prepared by powder sintering

Porous Ti compacts for biomedical applications are successfully fabricated in the porosity range from 5.0 to 37.1 vol% by controlling sintering conditions and Ti powder sizes. Young’s modulus and bending strength at the porosity of around 30 vol% are found to be similar to those of human cortical bone.     

Development of the remote-controlled platform truck for handling heavy object and the remote control human interface for the disaster response

General interest for robotic technology has been increased by the public and the media after Fukushima Daiichi Nuclear Power Plant (hereafter referred to as 1F) disaster. Especially, robots which can work under the very severe condition where personnel cannot access have demands for development. As to respond to such high demands, NEDO established ‘Disaster response unmanned systems development project’ in 2012.[1] This project is specialized in the development of various remote-controlled equipment, such as remote-controlled platform truck and remote control human interface under ‘Mobile Robot Development’. Remote-controlled platform truck is designed to safely and surely deliver robots and supplies, instead of using stairs and elevator, etc. in and out of building where it is too critical for personnel to work under. Remote control human interface for robots is designed to standardize the command and operation screen for operator, based on opinions from project members, and manned facility construction.[2] In this article, mechanical structure and development tasks for remote-controlled platform truck, and commonalization approach for operation and camera display of various remote-controlled equipment and robot for remote control human interface are stated. Background: due to hydrogen explosion triggered by The Great East Japan Earthquake on 11 March 2011, a reactor building at Fukushima Daiichi Nuclear Power Plant was severely damaged. It is required to reduce high radiation dose in the atmosphere of the reactor building to perform restoration. To pursue decontamination of the reactor building, equipment to lift and carry decontamination devices to upper floor are required.