Effects of sludge retention time and biosurfactant on the treatment of polyaromatic hydrocarbon (PAH) in a petrochemical industry wastewater

A laboratory-scale aerobic activated sludge reactor (AASR) system was employed to investigate the effects of sludge retention time (SRT) on the removal of three polyaromatic hydrocarbons (PAHs) with low benzene rings [(acenaphthene (ACT), fluorene (FLN) and phenanthrene (PHE)] and six PAHs with high benzene rings [(benzo[b]fluoranthene (BbF), benzo[k]fluoranthene (BkF), benzo[a]pyrene (BaP), indeno[1,2,3-cd]pyrene, dibenz[a,h]anthracene (DahA), benzo[g,h,i]perylene (BghiP)] in the presence of rhamnolipid (RD), emulsan (EM) and surfactine (SR) biosurfactants. This study showed that biosurfactants enhance the PAH biodegradation by increasing the biomass growth. RD exhibits a better performance than the other biosurfactants in the removal of the chemical oxygen demand (COD) and PAHs. At a RD concentration of 15 mg/L aerobic treatment for 25 days, SRT was enough to remove over 95% of total PAHs, and COD(dis). Under the same conditions 75% of COD originating from the inert organics (COD(inert)) and 96% of COD originating from the inert soluble microbial products (COD(imp)) were removed. At 25 days SRT and 15 mg/L RD concentration, about 88% of PAHs were biodegraded by the AASR system, 4% were accumulated in the system, 3% were released in the effluent, and 5% remained in the waste sludge.     

Exposure to dust, endotoxin and airborne microorganisms in wastewater sludge thermal drying units

The objective of this study was to assess workers' exposure to bioaerosols in sludge drying units. Simultaneous collection of inhalable dust and airborne biological agents was carried out using rotating cup samplers (CIP 10, Arelco). Sixteen stationary and 30 personal measurements were performed in three drying plants, during summer and winter. Microbial content of air was characterized by high amounts of Gram-negative bacteria, endotoxin, and thermophilic actinomycetes. High differences between exposure levels were observed with regard to workplaces and tasks. Dryers and conveyors in operation were closed, and the monitoring task in the dryer room was associated with low levels of personal exposure, close to background levels. Conversely, cleaning and maintenance of the dryer and conveyors required the equipment to be opened, giving significantly higher task-based personal exposure levels. The fall of dried sludge into indoor containers resulted in high emission and spreading of dust. Mean personal exposure levels to fungi were moderate or low for all tasks. Based on the results of this study, appropriate means of operational control and personal protection are being developed and implemented on sites.     

A laboratory assessment of the impact of brewery wastewater discharge on sulfide and methane production in a sewer

The impact of brewery wastewater discharge on sulfide and methane production in a sewer was assessed. Experiments were carried out on laboratory scale sewer reactors consisting of both an experimental and a control reactor. The control reactor was intermittently fed with real fresh sewage while the experimental reactor was fed with a mixture of brewery and domestic wastewater at two different proportions (10 and 25% v/v). 10% v/v discharge of brewery wastewater increased the H2S and CH4 production rates in the sewer reactor by 40% and 30%, respectively. When the brewery wastewater fraction was increased to 25% v/v, the H2S production rate of the experimental reactor decreased to the level of the control reactor. In contrast, the CH4 production rate maintained at a level that was 30% higher than that in the control reactor. These results indicate that the discharge of brewery wastewater into sewers can give negative impacts in relation to odour and corrosion management of the systems and will increase the greenhouse gas emissions from sewers. The study also reveals that the impact of trade waste on the biological reactions in sewers is complex, and requires careful experimental assessment in each case.     

Spectrophotometric characterization of human impacted surface waters in the Moselle watershed

In order to characterize the pollution discharged into the Moselle River and some of its tributaries, spectroscopic techniques, namely UV-vis spectroscopy and synchronous fluorescence spectroscopy, have been combined. UV-visible spectra were analysed using the maximum of the second derivative at 225 nm (related to nitrates), the SUVA254 and E2/E3 indices (related to the nature of organic matter). Synchronous fluorescence spectra (delta lambda = 50 nm) presented different shapes depending upon the type of pollution. The pollution results from anthropogenic activities: untreated domestic sewage due to misconnections in a periurban river, effluent from urban WWTPS, agricultural runoff (nitrates) in several streams, discharge from a paper mill (humic-like substances due to wood processing) and from steel mills (PAHs).     

Robust real-time pattern matching using bayesian sequential hypothesis testing

This paper describes a method for robust real time pattern matching. We first introduce a family of image distance measures, the "Image Hamming Distance Family". Members of this family are robust to occlusion, small geometrical transforms, light changes and non-rigid deformations. We then present a novel Bayesian framework for sequential hypothesis testing on finite populations. Based on this framework, we design an optimal rejection/acceptance sampling algorithm. This algorithm quickly determines whether two images are similar with respect to a member of the Image Hamming Distance Family. We also present a fast framework that designs a near-optimal sampling algorithm. Extensive experimental results show that the sequential sampling algorithm performance is excellent. Implemented on a Pentium 4 3 GHz processor, detection of a pattern with 2197 pixels, in 640 x 480 pixel frames, where in each frame the pattern rotated and was highly occluded, proceeds at only 0.022 seconds per frame.     

Optimal randomized RANSAC

A randomized model verification strategy for RANSAC is presented. The proposed method finds, like RANSAC, a solution that is optimal with user-specified probability. The solution is found in time that is (i) close to the shortest possible and (ii) superior to any deterministic verification strategy. A provably fastest model verification strategy is designed for the (theoretical) situation when the contamination of data by outliers is known. In this case, the algorithm is the fastest possible (on average) of all randomized \\RANSAC algorithms guaranteeing a confidence in the solution. The derivation of the optimality property is based on Wald's theory of sequential decision making, in particular a modified sequential probability ratio test (SPRT). Next, the R-RANSAC with SPRT algorithm is introduced. The algorithm removes the requirement for a priori knowledge of the fraction of outliers and estimates the quantity online. We show experimentally that on standard test data the method has performance close to the theoretically optimal and is 2 to 10 times faster than standard RANSAC and is up to 4 times faster than previously published methods.     

Extrasynaptic-GABA-mediated neuromodulation in a sensory cortical neural network

Simulating a neural network model of an early sensory cortical area, we investigated how gamma-aminobutyric acid (GABA) accumulated in extracellular space (ambient GABA), which depends on the synaptic activity of GABAergic interneurons, acts on the GABAa-receptors located on extrasynaptic membrane regions of principal cells (P), feedback inhibitory cells (F) and lateral inhibitory cells (L). The ambient GABA enhanced the selective responsiveness of P-cells to a target feature stimulus, if it acted on the extrasynaptic GABAa-receptors of P-cells. The ambient GABA led to depolarizing P-cells during ongoing (spontaneous) neuronal-activity periods, if it acted on the extrasynaptic GABAa-receptors of F or L cells. This membrane depolarization contributed to establishing an ongoing subthreshold neuronal state, by which the P-cells could respond quickly to the target stimulus. We suggest that the combinatorial inhibition of P, F, and L cells, meditated by extrasynaptic GABAa-receptors recognizing ambient GABA, is crucial for processing the information of relevant sensory features and for establishing an ongoing subthreshold cortical state that prepares as a ready state for subsequent sensory input. A failure in neuronal-activity-dependent regulation of ambient GABA, stemming largely from the depletion of GABA in extracellular space during senescence, may cause the degeneration of intracortical inhibition that leads to cognitive dysfunction in old animals.     

DCI架构：面向对象编程的新构想（上）

两位作者都曾对OOP的发展有过很大贡献,他们的新构想是期望反映出最终用户的认知模型中的角色以及角色之间的交互。     

Analysis of defects on BN nano-structures using high-resolution electron microscopy and density-functional calculations

Cubic boron nitride (c-BN) nucleation takes place on hexagonal boron nitride (h-BN) layers growing perpendicular to the substrate surface during thin film synthesis. Studies focused on the nucleation of the cubic phase suggest the possibility that transient phases and/or defects on these h-BN structures have a role in sp3-bonded cubic phase nucleation. In this study, we have investigated the nature, energetics, and structure of several possible defects on BN basal planes, including point defects, 4-, and 5-fold BN rings, that may possibly match the experimentally observed transient phase fine structure. TEM image observations are used to build approximate atomic models for the proposed structures, and DFT calculations are used to relax these structures while minimizing their respective total energies. These optimized atomic geometries are then used to simulate TEM images, which are compared to the experimentally observed structures. Data from DFT calculations and analysis of simulated images from the proposed atomic structures suggest that 4-fold BN rings are more likely to exist on the transient phase possibly leading to c-BN nucleation.     

Post-embryonic development of the antennal sensilla in Melipona quadrifasciata anthidioides (Hymenoptera: Meliponini)

The sensilla are sensory organs formed by cuticular and cellular structures specialized in reception of chemical and physical stimuli from the environment and transmission to the insect's central nervous system. In function of the great concentration of sensilla, the antennae are the main organs for interaction between bees and with the environment. This work studied the presence of antennal sensilla in the different phases of pupal development of the stingless bee Melipona quadrifasciata anthidioides by means of scanning electron microscopy and light microscopy. The results showed that antennal sensilla begin their development in the transition of the prepupae to the white-eyed pupae and finish it in the pigmented-body pupae phase. The antennal sensilla were exposed to the environment in the black-eyed pupae when the old cuticle is completely digested, suggesting that only in the final pupal phases can these bees perceive the environmental stimuli.