An investigation of the use of heat pipes for machine tool spindle bearing cooling

The results of an experimental investigation into the practicality of using a heat pipe installed in the spindle of a milling machine to remove the heat produced in the spindle bearings which is capable of causing thermal distortion and cutting error are presented in the paper. Measurements of the variation of bearing temperature with time are reported at four different spindle speeds when there was no heat pipe installed, when the heat pipe was cooled by air and when the heat pipe was cooled by an ice/water mixture. Analysis of the results by a simple heat transfer model indicates that the particular heat pipe used was capable of removing up to 160 W with a corresponding 50% reduction in the rise of the bearing temperature above the temperature of the surrounding air at steady operating conditions.     

In situ13C NMR study of tert-butanol interaction with moderately concentrated sulfuric acid

An in situ NMR study of tert-butanol dehydration in 95 and 85% sulfuric acid did not indicate the formation of tert-butyl cations as active reaction intermediates. Instead, only NMR lines from oxonium ions under the condition of fast exchange with water and the acid were observed. It is most likely that, in the concentrated acid, the active intermediates of this reaction are represented by tert-butyl sulfuric ester which probably is a precursor of invisible tert-butyl carbenium ions representing short-lived excited or transition states.     

Conversion of saturated cyclic and noncyclic amines over a sulphided NiMo/Al2O3 catalyst : mechanisms of carbon - nitrogen bond cleavage

The objective of this work was to provide comprehensive hypotheses concerning the mechanisms operative in the C---N bond cleavages occurring during the catalytic conversion of amines over a conventional hydrotreating catalyst, so as to account for experimental observations and to help in developing better hydrodenitrogenation catalysts. The approach consists in a study of the relations between the structure and the reactivity of two series of amines with different numbers of hydrogen atoms on the carbon atoms in the and β positions with respect to their nitrogen atom. It was found that the hydrogen atoms on the carbon atom in the β position are involved in the formation of hydrocarbons, and that neither the hydrogen atoms on the carbons in the position nor those on the carbon atoms in the β position are involved in the formation of condensation products. On the basis of these results, two mechanisms are proposed for the formation of the different reaction products.     

Corrosion morphologies on magnesium alloy AZ 91

Initiation and early propagation of pitting and filiform corrosion on bare alloy AZ91 (9% Al, 1% Zn) are investigated by natural immersion corrosion tests, electrochemical measurements and microanalytical studies. Initiation sites are few. Corrosion spreads from these sites first in the form of filiform corrosion for a limited period of time and pitting which later develops into a cellular type of etching. The important factors affecting filiform corrosion are temperature, material structure and degree of polarization at the anodic sites. Filiform attack on AZ91, unlike the classical mechanisms of filiform corrosion on coated metals, is driven by hydrogen evolution reaction on the cathodic sites of the surface, occurs under significant anodic control, propagates at a high, constant speed independent of degree of polarization along preferential paths determined by compositional and crystallographic factors, and is a temporary phenomenon under open circuit conditions. Pitting corrosion is more predominant with decreasing anodic polarization.     

Laboratory and analytical studies of the effects of multipulselightning current on metal oxide arresters

Multiple stroke lightning ground flashes can impose surges of exceptional severity on the arresters used to protect exposed distribution system equipment. This paper reports laboratory and analytical studies of the effects of representative multiple impulse currents on zinc-oxide surge arresters of distribution class. The results indicate that sextuple 8/20 μs currents can cause damage to arresters not evident with standard lightning current tests and so are worthy of inclusion in testing Standards     

Efficiency of raising the lining endurance in induction furnaces

Induction furnaces are expected to have wider application in industry. Published data are used to show that the endurance of refractory crucibles in such furnaces is unsatisfactory. The authors give their own data on the operation of high-endurance linings. The effect of the endurance on the technical and economical parameters of heating and the quality of the molten material is discussed.Translated fron Ogneupory, No. 6, pp. 23 – 25, June, 1994     

Interpretation of the results of the CORA-33 dry core boiling water reactor test

All boiling water reactor (BWR) degraded core experiments performed prior to CORA-33 were conducted under ‘wet’ core degradation conditions, in which water remains within the core and continuous steaming feeds metal-steam oxidation reactions on the in-core metallic surfaces. However, one dominant set of accident scenarios would occur with reduced metal oxidation under ‘dry’ core degradation conditions and, prior to CORA-33, this set had been neglected experimentally. The CORA-33 experiment was designed specifically to address this dominant set of BWR ‘dry’ core severe accident scenarios and to resolve partially phenomenological uncertainties concerning the behavior of relocating metallic melts that drain into the lower regions of a ‘dry’ BWR core (the ex-reactor experiments at Sandia National Laboratories will further address these uncertainties). CORA-33 was conducted on 1 October 1992, in the CORA test facility at Karlsruhe. A review of the CORA-33 data indicates that the objectives were achieved; i.e. core degradation occurred at a core heat-up rate (characterized by the absence of any temperature escalation caused by oxidation) and a test section axial temperature profile (at incipient structural melting) that are prototypic of full-core nuclear power plant simulations under ‘dry’ core conditions. Simulations of the CORA-33 test at Oak Ridge National Laboratory (ORNL) have required the modification of existing control blade-canister materials interaction models to include the eutectic melting of the stainless steel-zircaloy interaction products and the heat of mixing of stainless steel and zircaloy. The timing and location of canister failure and melt intrusion into the fuel assembly appear to be adequately simulated by the ORNL models. This paper will present the results of the post-test analyses carried out at ORNL based on the experimental data and the post-test examination of the test bundle at Karlsruhe. The implications of these results with respect to degraded core modelling and the associated safety issues are also discussed.     

Irregular dynamics of a chain of circle maps with quasiperiodic excitation

An analysis is made of the spatial evolution of quasiperiodic regimes in a chain of coupled circle maps. Mechanisms for the appearance of strange nonchaotic dynamics and the properties of irregular attractors are analyzed. Pis’ma Zh. Tekh. Fiz. 23, 73–79 (April 12, 1997)     

Health and Indoor Climate Complaints of 7043 office Workers in 61 Buildings in the Netherlands

During the winter of 1988/1989, the relationships between the prevalence of work-related health and indoor climate complaints and a number of building, management, workplace and personal characteristics have been investigated in a study in more than 60 office buildings located throughout the Netherlands. To collect the information, a questionnaire was prepared on health and indoor climate complaints and personal and workplace characteristics. A checklist was used to obtain information on building characteristics More than 7000 questionnaires were completed by the regular users of the buildings investigated. The results showed that the prevalence of symptoms was higher in air-conditioned buildings than in naturally or mechanically ventilated buildings. some other variables were also related with most work-related complaints after adjustment for selected management, personal, workplace and job characteristics. These included gender, work satisfaction in general, presence of allergies and/or respiratory symptoms, and personal control over temperature at the workplace. No differences were found in symptom prevalences between buildings with spray and steam humidification. The combination of air-conditioning and humidification did not lead to further increases in the prevalence of complaints as compared to buildings with only airconditioning or only humidification.     

Microstructure and creep of eutectic indium/tin on copper and nickel substrates

The behavior during creep in shear of eutectic indium-tin joints on copper and nickel substrates was examined in order to determine the effect of creep deformation on the microstructure of the alloy. Primary creep was absent in all the samples tested. The stress exponent at 20° C was much higher for samples on nickel than for those on copper, indicating a different creep deformation mechanism. Also, the microstructure within the indium-tin joints differed significantly with a change of substrate. Samples with a nickel substrate showed a colony microstructure that was not observed in those with a copper substrate. Thus, eutectic morphology is important in determining deformation mechanism during creep. The microstructure within the joints in tested and untested regions of the samples was effectively the same. This is quite distinct from the behavior of eutectic lead-tin observed in previous work. Lead-tin formed a recrystallized band of material along a region of concentrated shear deformation. While the deformation pattern in the indium-tin samples appeared to be the same as for lead-tin, the microstructural changes did not occur. This implies that the behavior observed in lead-tin is not universal to eutectic alloys.