Service‐level assurance in high‐availability multi‐unit systems using the M‐for‐N backup scheme

In this paper, we investigate service‐level assurance in high‐availability multi‐unit systems using the M‐for‐N backup scheme. M‐for‐N shared protection (backup) systems with priority control (i.e. prioritized protection switching and prioritized re‐housing of repaired units) can be applied to actual telecommunication devices that are subject to service‐level agreement (SLA) involving reliability measures. A priority level is assigned to each end user in such a system and the switching and unit re‐housing process is subject to the priority. The main contribution of this paper is to give a practical computation method of the user‐perceived availability under the priority control. Our case studies for real telecommunication systems reveal the effect of priority control on the user‐perceived availability. Copyright © 2011 John Wiley & Sons, Ltd.     

A quantitative analysis of a trace amount of hydrogen in high temperature heat-treated carbons

A technique to determine a trace amount of hydrogen in carbon materials heat-treated above 1000 °C was developed. Three types of carbons prepared from poly(furfulyl alcohol), poly(vinyl chloride) and mesophase carbon microbeads were heat-treated at various temperatures ranging from 1000 to 1800 °C. Then they were gasified by O₂ in a fixed bed flow reactor, and the H₂O gases formed during the gasification processes were carefully monitored with a Karl Fischer moisture analyzer. As a result, this method makes it possible to determine the hydrogen contents in the carbons down to three places of decimals as a weight percent and can detect even a trace amount of hydrogen as low as 0.002 wt.%. A possible chemical structure of carbon edge sites was also discussed based on the experimentally determined hydrogen contents.     

Preparation of surfactant-free vinyl polymers by conventional emulsion polymerization using hydrolysable emulsifiers

Emulsion polymerizations of several vinyl monomers, styrene, methyl methacrylate, butyl methacrylate, butyl acrylate, and vinyl acetate, in water using alkali–hydrolysable cationic surfactants with a betaine ester group (1-alkoxycarbonylmethyl)trimethylammonium chlorides, as emulsifiers were carried out and properties of the resulting latices and the polymers recovered by hydrolysis and salting out were investigated. There were little influences of the surfactants and monomers used here on the polymerizations, forming stable and monodisperse latices with a mean diameter of ca. 70 nm and giving a high molecular weight of polymers at high yields. All polymers were precipitated and recovered by adding a small amount of sodium hydroxide into the latex solutions contained little amount of ionic species. Solvent-cast films of the polymers were found to have surfaces as hydrophobic as those for the corresponding pure polymers prepared by bulk polymerization.     

Wavelength interval selection in multicomponent spectral analysis by moving window partial least-squares regression with applications to mid-infrared and near-infrared spectroscopic data

A new wavelength interval selection procedure, moving window partial least-squares regression (MWPLSR), is proposed for multicomponent spectral analysis. This procedure builds a series of PLS models in a window that moves over the whole spectral region and then locates useful spectral intervals in terms of the least complexity of PLS models reaching a desired error level. Based on a proposed theory demonstrating the necessity of wavelength selection, it is shown that MWPLSR provides a viable approach to eliminate the extra variability generated by non-composition-related factors such as the perturbations in experimental conditions and physical properties of samples. A salient advantage of MWPLSR is that the calibration model is very stable against the interference from non-composition-related factors. Moreover, the selection of spectral intervals in terms of the least model complexity enables the reduction of the size of a calibration sample set in calibration modeling. Two strategies are suggested for coupling the MWPLSR procedure with PLS for multicomponent spectral analysis: One is the inclusion of all selected intervals to develop a PLS calibration model, and the other is the combination of the PLS models built separately in each interval. The combination of multiple PLS models offers a novel potential tool for improving the performance of individual models. The proposed procedures are evaluated using two open-path Fourier transform infrared data sets and one near-infrared data set, each having different noise characteristics. The results reveal that the proposed procedures are very promising for vibrational spectroscopy-based multicomponent analyses and give much better prediction than the full-spectrum PLS modeling.     

Distribution-free checkpoint placement algorithms based on min-max principle

In this paper, we consider two kinds of sequential checkpoint placement problems with infinite/finite time horizon. For these problems, we apply approximation methods based on the variational principle and develop computation algorithms to derive the optimal checkpoint sequence approximately. Next, we focus on the situation where the knowledge on system failure is incomplete, i.e., the system failure time distribution is unknown. We develop the so-called min-max checkpoint placement methods to determine the optimal checkpoint sequence under an uncertain circumstance in terms of the system failure time distribution. In numerical examples, we investigate quantitatively the proposed distribution-free checkpoint placement methods, and refer to their potential applicability in practice.     

Biomechanical study of sternal closure using rigid fixation techniques in human cadavers

BACKGROUND: We believe rigid plate fixation may be superior to wire fixation in sternal closure, as rigid fixation used in the craniofacial skeleton has shown greater stability, lower postoperative pain, and accelerated bone healing. We hypothesize that sterna fixed with titanium plates are more stable mechanically than sterna fixed with wires. METHODS: The sterna from human cadavers were used in this two-phased study. Phase I compared wires to four-hole titanium straight plates. Phase II compared wires to four-hole titanium custom H plates. The sterna were tested biomechanically using all fixation methods. RESULTS: Phase I showed no statistically significant difference in the stiffness or lateral displacement between the wired and straight plated sterna. Phase II showed a statistically significant greater stiffness (p < 0.05) and less lateral displacement (p < 0.05) in the custom plated sterna over the wired sterna. CONCLUSIONS: Our results showed that custom titanium H plates were superior to wire fixation. Furthermore, our results established the importance of plate configuration in sternal fixation. Our study may have beneficial clinical implications, as decreased motion at the sternotomy site could mean less postoperative pain, a decreased incidence of infection, and accelerated bone healing.     

Susceptibilities of bacteria isolated from patients with lower respiratory infectious diseases to antibiotics (1996)

The bacteria isolated from the patients with lower respiratory tract infections were collected by institutions located throughout Japan, since 1981. Ikemoto et al. have been investigating susceptibilities of these isolates to various antibacterial agents and antibiotics, and characteristics of the patients and isolates from them each year. Results obtained from these investigations are discussed. In 16 institutions around the entire Japan, 557 strains of presumably etiological bacteria were isolated mainly from the sputa of 449 patients with lower respiratory tract infections during the period from October 1996 to September 1997. MICs of various antibacterial agents and antibiotics were determined against 98 strains of Staphylococcus aureus, 93 strains of Streptococcus pneumoniae, 84 strains of Haemophilus influenzae, 84 strains of Pseudomonas aeruginosa (non-mucoid strains), 17 strains of Pseudomonas aeruginosa (mucoid strains), 31 strains of Moraxella subgenus Branhamella catarrhalis, 21 strains of Klebsiella pneumoniae etc., and the drug susceptibilities of these strains were assessed except for those strains that died during transportation. 1) S. aureus S. aureus strains for which MICs of oxacillin (MPIPC) were higher than 4 micrograms/ml (methicillin-resistant S. aureus) accounted for 67.3%. The frequency of the drug resistant bacteria increased comparing to the previous year's 52.7%. Arbekacin (ABK) and vancomycin (VCM) showed the highest activities against both S. aureus and MRSA with MIC80s of 1 microgram/ml. 2) S. pneumoniae Imipenem (IPM) and panipenem (PAPM) of carbapenems showed the most potent activities with MIC80s of 0.063 microgram/ml. Faropenem (FRPM) showed the next potent activity with MIC80 of 0.125 microgram/ml. The other drugs except erythromycin (EM), clindamycin (CLDM) and tetracycline (TC) were active against S. pneumoniae tested with MIC80s of 8 micrograms/ml or below. 3) H. influenzae The activities of all drugs were potent against H. influenzae tested with MIC80s of 4 micrograms/ml or below. Cefotiam (CTM), cefmenoxime (CMX), cefditoren (CDTR) and ofloxacin (OFLX) showed the most potent activities with MIC80s of 0.063 microgram/ml. 4) P. aeruginosa (mucoid strains) Tobramycin (TOB) showed the most potent activity against P. aeruginosa (mucoid strains) with MIC80 of 1 microgram/ml. Ceftazidime (CAZ), cefsulodin (CFS), IPM, gentamicin (GM), ABK and ciprofloxacin (CPFX) showed the next potent activities, with MIC80s of 2 micrograms/ml. The MIC80s of the other drugs ranged from 4 micrograms/ml to 16 micrograms/ml. 5) P. aeruginosa (non-mucoid strains) TOB and CPFX showed the most potent activities against P. aeruginosa (non-mucoid strains) with MIC80s of 1 microgram/ml. The MIC80s of piperacillin (PIPC) and cefoperazone (CPZ) were 16 micrograms/ml in 1995, and they were 64 micrograms/ml in 1996. 6) K. pneumoniae All drugs except ampicillin (ABPC) were active against K. pneumoniae. CMX, cefpirome (CPR), cefozopran (CZOP) and carumonam (CRMN) showed the most potent activities against K. pneumoniae with MIC80s of 0.125 microgram/ml. The MIC80s of the other drugs ranged from 0.25 microgram/ml to 2 micrograms/ml. 7) M.(B) catarrhalis Against M.(B.) catarrhalis, all drugs showed good activities with MICs of 4 micrograms/ml or below. IPM and minocycline (MINO) showed the most potent activities with MICs of 0.063 microgram/ml. Also, we investigated year to year changes in the characteristics of patients, their respiratory infectious diseases, and the etiology. Patients' backgrounds were examined for 557 isolates from 449 cases. The examination of age distribution indicated that the proportion of patients with ages over 60 years was 71.0% of all the patients showing a slight increase over that in 1994. Proportions of diagnosed diseases were as follows: Bacterial pneumonia and chronic bronchitis were the most frequent with 35.9% and 30.3% respectively. They were followed by bronchiectasis with a proportion of 10.     

Ultraviolet-visible and surface-enhanced Raman scattering spectroscopy studies on self-assembled metalloporphyrin films on organic monolayer-modified ultra-thin silver substrates

A self-assembled monolayer (SAM) film of 5,10,15,20-tetra-(para-chlorophenyl)-porphyrin terbium (or lutetium) hydroxy compound (TbOH/LuOH) fabricated on a silver substrate premodified with a SAM of 4-mercaptopyridine (PySH) was studied by ultraviolet-visible (UV-Vis) spectroscopy and surface-enhanced Raman scattering (SERS) spectroscopy. PySH can modify the substrate and deliver its pyridyl group pointing out from the silver surface. Thus, we can investigate the effects of the central metals of the metalloporphyrins in the formation of the composite films. For the TbOH-PySH composite film, a new absorption band arising from TbOH appears at 425 nm, and a band at 512 nm due to the PySH-modified silver substrate shifts to a longer wavelength (538 nm). The results suggest that TbOH is successfully assembled on the top of PySH-modified silver film and that there is an interaction between TbOH and PySH in the film. The frequency shifts and relative intensity changes of bands due to PySH in the SERS spectra imply the coordination of the pyridyl group on Tb in the SAM. As for the LuOH-PySH composite film, its SERS spectrum shows bands arising from both the LuOH and PySH moieties, indicating that LuOH is assembled on the PySH-modified silver film. Furthermore, a band at 1221 cm(-1) due to the in-plane C-H bending mode of PySH disappears, implying that the pyridyl moiety of PySH becomes more parallel to the silver surface upon the formation of the LuOH-PySH composite film. Additionally, an absorption band at 515 nm shifts to a longer wavelength (541 nm) and becomes broad upon the formation of the composite film, suggesting an interaction between LuOH and PySH in the film. By comparing the spectral changes between the two self-assembled composite films, we find that the central metal is crucial in the formation of the composite films. The structure and orientation of the composite films depend on the central metal of the metalloporphyrin compounds.     

Part I: surface-enhanced Raman spectroscopy investigation of amino acids and their homodipeptides adsorbed on colloidal silver

Surface-enhanced Raman scattering spectra (SERS) were measured for various amino acids: L-methionine (Met), L-cysteine (Cys), Lglycine (Gly), L-leucine (Leu), L-phenylalanine (Phe), and L-proline (Pro) and their homodipeptides (Met-Met, Cys-Cys, Gly-Gly, LeuLeu, Phe-Phe, and Pro-Pro) in silver colloidal solutions. The geometry and orientation of the amino acids or dipeptides on the silver surface, and their specific interaction with the surface, were deducted by detailed spectral analysis of the SERS spectra. This analysis has allowed us to propose the particular surface geometry of amino acids or dipeptides and also implied that C-C bonds were almost parallel to the surface, as evidenced by the absence of marker bands in the skeletal C-C stretching region of the spectra. Additionally, using "time-dependent" SERS measurements we solved an existing controversy regarding the binding specificity of Gly-Gly on the silver surface.