AIGaAsSb Buffer/Barrier on GaAs substrate for InAs channel devices with high electron mobility and practical reliability

InAs/AlGaAsSb deep quantum well was successfully formed on GaAs substrate and examined for two electron devices, Hall elements (HEs), and field-effect transistors (FETs). With a thin buffer layer of 600 nm AIGaAsSb on GaAs substrate, we observed high electron mobility more than 23000 cm²/Vs and extrinsic effective electron velocity of 2.2 x 10⁷ cm/s for a 15 nm thick InAs channel at room temperature. AIGaAsSb lattice matched to InAs was discussed from the view points of insulating property, carrier confinement, and oxidization rate. Reliability data good enough for practical use were also obtained for HEs. We demonstrated AIGaAsSb as a promising buffer/barrier layers for InAs channel devices on GaAs substrate, and we discussed the possible advantages of AIGaAsSb also for InGaAs FETs.     

Six-month clinical and angiographic outcome of the new, less shortening Wallstent in native coronary arteries

BACKGROUND: The new, less shortening, self-expanding Wallstent is characterized by longitudinal flexibility, a protective membrane, a low profile, and a customized range of diameters (3.5 to 6.0 mm). The recent modification of the braiding angle of the Wallstent has resulted in a new device with less shortening on expansion and a concomitant reduction in radial force. We hypothesized that the enforced mechanical remodeling produced by the selection of an oversized Wallstent might result in improved accommodation of subsequent reactive intimal hyperplasia and prevention of chronic recoil of the vessel. METHODS AND RESULTS: To prove this hypothesis, we recently implanted 44 new, less shortening Wallstents in 35 native coronary arteries in 35 patients with acute or threatened closure after balloon angioplasty, according to a strategy of oversizing of Wallstent diameter and complete coverage of the lesion length. The initial and 6-month follow-up angiograms were analyzed with a computer-based quantitative coronary angiography (QCA) system. Acute gain (minimal luminal diameter [MLD] post minus MLD pre) and late loss (MLD post minus MLD at follow-up) were examined. Stent deployment was successful in 44 of 44 attempts (100%). Nominal stent diameter used was 1.40 mm larger than the maximal vessel diameter. One patient (3%) with a dilated but unstented lesion proximal to the stented segment sustained a subacute occlusion on day 1 associated with myocardial infarction. Event-free survival at 30 days after stent implantation was 97% (34 of 35 patients). Of the 34 patients eligible for 6-month angiographic follow-up, 3 who were asymptomatic declined repeat angiography. MLD (and percent diameter stenosis [% DS]) changed from 0.83 +/- 0.50 mm (72%) pre through 3.06 +/- 0.48 mm (15%) post to 2.27 +/- 0.74 mm (28%) at follow-up. Acute gain was 2.23 +/- 0.63 mm, and late loss was 0.78 +/- 0.61 mm. Angiographic restenosis ( > 50% DS) was observed in 5 of 31 patients (16%) at 6 months, all of whom underwent repeat angioplasty. Thus, the overall event-free survival at 6-month follow-up was 83% (29 of 35 patients). CONCLUSIONS: The oversized Wallstent implantation with complete coverage of the lesion length conveyed a favorable 6-month clinical and angiographic outcome. The large acute gain obtained by the Wallstent afforded greater accommodation of the subsequent late loss. The enforced mechanical remodeling by oversized new Wallstents may result in prevention of acute and chronic recoil of the vessel wall and subsequently a lower restenosis rate at follow-up.     

The effect of washing and heat treatment on the surface characteristics of fluorocarbon resin-treated polyester

Polyester fabrics and films treated with two fluorocarbon resins were washed and heat treated. Water repellency, surface tension and ESCA measurements were carried out. Changes in the water repellency of the resin-treated polyester fabric caused by washing and heat treatment are related to modification of the chemical composition of the polyester surface.     

Increased prevalence of luteinizing hormone beta-subunit variant in Japanese infertility patients

To determine the frequency of a common luteinizing hormone variant in a Japanese population and to evaluate its significance in infertility, serum samples were collected from 169 healthy non-pregnant Japanese women, 105 healthy adult Japanese men and 97 female Japanese infertility patients. The luteinizing hormone variant includes two point mutations in the beta-subunit gene (Trp8 to Arg8 and Ile15 to Thr15). DNA from blood cells was studied in 10 healthy women, 10 men and five patients using polymerase chain reaction and direct sequencing. In immunoassays, results with a monoclonal antibody recognizing only the wild-type hormone and a polyclonal antibody recognizing the variant as well were compared as a ratio; ratios in heterozygotes and in individuals with only wild-type alleles ranged from 0.19 to 0.50 and from 0.56 to 1.21, respectively, and 0.50 was considered a 'cut-off' value for identifying individuals with the variant. For the larger subject groups, the frequency of the variant was 9.5% in normals. The mean ratio (0.80 +/- 0.35) in infertility patients was significantly lower (P < 0.01) than in healthy women (1.09 +/- 0.56), and the variant occurred more frequently in infertility patients (16.5%) than in healthy women (8.3%; P < 0.05). The variant was more frequent in patients with ovulatory disorders (43.8%) than other patients (16.0%; P < 0.05).     

Quantification of sphingosine derivatives in human platelets: inducible formation of free sphingosine

OBJECTIVE: This study aimed to investigate the incidence of cystoid macular edema and anterior uveitis associated with the use of latanoprost. DESIGN: A retrospective review of patients treated with latanoprost in the authors' practice between September 1, 1996, and August 1, 1997, was performed. PARTICIPANTS: Ninety-four patients and 163 eyes were studied. INTERVENTION: Patients presenting with signs and symptoms of ocular inflammation while receiving latanoprost were noted, and their response to the discontinuation of the drug was recorded. MAIN OUTCOME MEASURES: The presence and degree of anterior uveitis and cystoid macular edema were measured. RESULTS: Six (6.4%) of 94 patients (8 [4.9%] of 163 eyes) had anterior uveitis develop, and 2 (2.1%) of 94 patients (2 [1.2%] of 163 eyes) had cystoid macular edema develop while being treated with latanoprost. CONCLUSION: Although latanoprost is an effective ocular-hypotensive agent, the authors' experience with the drug has shown a significant incidence of anterior uveitis and cystoid macular edema. To the authors' knowledge, this is the first study to report the incidence of both cystoid macular edema and anterior uveitis associated with latanoprost therapy. Treating physicians should be aware of these potential complicating side effects of latanoprost.     

Basic fibroblast growth factor is neither necessary nor sufficient for the development of retinal neovascularization

Basic fibroblast growth factor (FGF2) is constitutively expressed in the retina and its expression is increased by a number of insults, but its role in the retina is still uncertain. This study was designed to test the hypothesis that altered expression of FGF2 in the retina affects the development of retinal neovascularization. Mice with targeted disruption of the Fgf2 gene had no detectable expression of FGF2 in the retina by Western blot, but retinal vessels were not different in appearance or total area from wild-type mice. When FGF2-deficient mice were compared with wild-type mice in a murine model of oxygen-induced ischemic retinopathy, they developed the same amount of retinal neovascularization. Transgenic mice with a rhodopsin promoter/Fgf2 gene fusion expressed high levels of FGF2 in retinal photoreceptors but developed no retinal neovascularization or other abnormalities of retinal vessels; in the ischemic retinopathy model, they showed no significant difference in the amount of retinal neovascularization compared with wild-type mice. These data indicate that FGF2 expression is not necessary nor sufficient for the development of retinal neovascularization. This suggests that agents that specifically antagonize FGF2 are not likely to be useful adjuncts in the treatment of retinal neovascularization and therapies designed to increase FGF2 expression are not likely to be complicated by retinal neovascularization.     

Stellate ganglion block does not change the tympanic membrane temperatures of either block or unblock sides in male volunteers

STUDY OBJECTIVES: To test the effect of stellate ganglion block on tympanic membrane temperatures. DESIGN: Prospective, observational study. SETTING: Department of Anesthesia, Yamanashi Medical University, Yamanashi, Japan. SUBJECTS: 7 healthy male volunteers. INTERVENTIONS: Stellate ganglion block, 6 ml of 1% mepivacaine hydrochloride, was administered. MEASUREMENTS AND MAIN RESULTS: Application of temperature probes (right and left tympanic membranes, eight adhesive right skin-surface temperatures at the chest, upper arm, digital fingertip, lateral calf, thigh, and great toe) was followed by a 30-minute control period. Temperatures were recorded every 15 minutes for 30 minutes before stellate ganglion block and every 5 minutes for 40 minutes after the block. The right tympanic membrane temperature increased slightly but not significantly compared with the left tympanic membrane temperature 10 minutes after stellate ganglion block and subsequently. Right skin-surface temperature gradients at the upper limb decreased slightly but not significantly after stellate ganglion block. Similarly, right skin-surface temperature gradients at the lower limb decreased slightly but not significantly after stellate ganglion block. CONCLUSIONS: Stellate ganglion block does not change the tympanic membrane temperatures of either block or unblock sides.     

Development of a laser wavefront sensor for measurement of discharges in air

A laser wavefront sensor of the Shack‐Hartmann type capable of simultaneous measurement at two wavelengths was constructed. The sensor uses a single optical path, and is suited for applications such as high‐voltage discharges in air, in which large insulation distances are necessary. The sensor was used to detect optical path differences due to an impulse discharge in air across a needle–plane electrode gap of gap length 17 mm. Optical path differences were measured at laser wavelengths of 532 and 1064 nm at 1.6 µs after insulation breakdown across the gap. From the difference in optical path differences at the two wavelengths, a line‐integrated electron density distribution in the direction perpendicular to the gap was obtained near the high‐voltage electrode. The distribution had a peak value of 1.4 × 10²⁰m^?2 and a full width at half maximum of 4.4 mm. Because of the coverage of a large observation area including the entire gap, the spatial resolution was 1.4 mm, which was inadequate to obtain the precise form of the electron density distribution. However, the results show the possibility of applying laser wavefront sensing to electron density measurement. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 146(4): 10–17, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10247     

Changes in capacitance and dielectric dissipation factor of water‐treed XLPE with applied voltage

The capacitance C and dielectric dissipation factor tan δ of a water‐treed XLPE sheet sample have been measured under the application of 100 V or 1 kV at 60 Hz. The values of C and tan δ at 1 kV are much larger than those at 100 V. The value of tan δ gradually decreases with the length of exposure to a voltage of 1 kV. On the other hand, C is almost constant versus the exposure time. The results have been discussed on the basis of a model in which filling of channels interconnecting voids by water is taken into account. It has been found that the increase of C and tan δ is caused by the growth of the water‐filled channel region on the application of voltage. The gradual decrease in tan δ with the exposure time is explained by the change in the conductivity of the water‐filled channel region, as a result of which the relaxation time shifts to higher frequencies. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 144(1): 12–20, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10160     

Autocatalytic processing of heme by lactoperoxidase produces the native protein-bound prosthetic group

The covalently bound prosthetic group of lactoperoxidase (LPO) has been obtained by hydrolysis of the protein and identified as a dihydroxylated heme. A baculovirus expression system has been developed for LPO and used to obtain protein in which the heme is only partially covalently bound. Reaction of the purified heme. apoLPO complex with H2O2 results in both autocatalytic modification of the heme and covalent attachment to the protein. Hydrolytic experiments establish that the autocatalytically incorporated heme is bound normally. Two monohydroxylated heme intermediates have been detected. The peroxidative activity of LPO increases in proportion to the extent of covalently bound heme. The LPO results provide a paradigm for autocatalytic incorporation of heme groups into the mammalian peroxidases, including myeloperoxidase and eosinophil peroxidase, all of which exhibit strong sequence similarity with LPO and have covalently-bound heme groups.