Preparation of a single-chain variable fragment and a recombinant antigen-binding fragment against the anti-malarial drugs, artemisinin and artesunate, and their application in an ELISA

Two different recombinant antibodies, a single-chain variable fragment (scFv) and an antigen-binding fragment (Fab), were prepared against artemisinin (AM) and artesunate (AS) and were developed for use in an enzyme-linked immunosorbent assay (ELISA). The recombinant antibodies, which were derived from a single monoclonal antibody against AM and AS (mAb 1C1) prepared by us, were expressed by Escherichia coli cells and their reactivity and specificity were characterized. As a result, to obtain sufficient signal in indirect ELISA, a much greater amount of a first antibody was needed in the use of scFv due to the differences of the secondary antibody and conformational stability. Therefore, we focused on the development of the recombinant Fab antibodies and applied it to indirect competitive ELISA. The specificity of the Fab was similar to that of mAb 1C1 in that it showed specific reactivity toward AM and AS only. The sensitivity of the icELISA (0.16 μg/mL to 40 μg/mL for AM and 8.0 ng/mL to 60 ng/mL for AS) was sufficient for analysis of antimalarial drugs, and its utility for quality control of analysis of Artemisia spp. was validated. The Fab expression and refolding systems provided a good yield of high-quality antibodies. The recombinant antibody against AM and AS provides an essential component of an economically attractive immunoassay and will be useful in other immunochemical applications for the analysis and purification of antimalarial drugs.     

Electron spin resonance of thin films of organic light-emitting material tris(8-hydroxyquinoline) aluminum doped by magnesium

We have successfully observed electron spin resonance (ESR) signals of radical anions in thin films of tris(8-hydroxyquinoline) aluminum (Alq₃), a compound widely used as electron transporting and luminescent layers in organic light-emitting diodes. To obtain definitely defined radical-anion states in Alq₃, we doped Alq₃ with Mg by co-evaporating these materials. The obtained g value and peak-to-peak ESR linewidth ΔH_pp of Alq₃ radical anions are 2.0030 and 2.19 mT, respectively. Theoretical g value and hyperfine interactions were calculated by density functional theory method, which are in good agreement with the experimental results. A quantitative evaluation of doping concentration was performed. We confirmed that doped charges are localized at deep trapping sites by the lineshape analysis and temperature dependence of the ESR signals. Morphological investigation using transmission electron microscopy clarified that the co-evaporated Mg atoms form clusters.     

Aqueous phase synthesized CdSe magic-sized clusters: solution composition dependence of adsorption layer structure

We report dispersion solution composition dependence of the adsorption layer structure and the physical and optical properties of aqueous phase-synthesized semiconductor nanoparticles (NPs). We synthesized cysteine (Cys)-capped CdSe NPs with well-defined core structures, dispersed them in a series of aqueous solutions with different compositions, and then investigated their adsorption layer structure and physical and optical properties. Each CdSe NP consisted of a (CdSe)33 or (CdSe)34 magic-sized cluster (d - 1.45 nm) core, a ligand-Cys shell, and an adsorption layer. The dispersion solution composition strongly affected the adsorption layer structure of the CdSe NPs. The solution with a composition close to that of the as-prepared solution stabilized the physical and optical properties of the NPs. The solution with a composition different from that of the as-prepared solution, however, resulted in large changes in their adsorption layer structure and thus their physical and optical properties. The solution composed of neutral or weakly charged Cys and Cd-Cys complexes led to the adsorption layer with low charge density and that destabilized the NPs. The solution containing only neutral or weakly charged forms of Cys, without Cd-Cys complexes, was favorable to the formation of a thick adsorption layer with low charge density and that destabilized the NPs. The amount of adsorbed Cys in the adsorption layer depended on the dispersion solution composition. However, the amount of adsorbed Cd-Cys complexes in the adsorption layer was almost constant regardless of the dispersion solution composition.     

Water Network in Room-Temperature Ionic Liquid: <Emphasis Type="Italic">N,N</Emphasis>-Diethyl-<Emphasis Type="Italic">N</Emphasis>-Methyl-<Emphasis Type="Italic">N</Emphasis>-2-Methoxyethyl Ammonium Tetrafluoroborate

Crystal structures of room-temperature ionic liquid (RTIL)-H₂O mixtures are determined by the X-ray diffraction method. The RTIL is N,N-diethyl-N-methyl-N-2-methoxyethyl ammonium tetrafluoroborate, [DEME][BF₄]. At 0.9 mol pct H₂O, two kinds of superstructures occur simultaneously without a strain. Also, the volume of the unit cell is very small only at 0.9 mol pct additives. This relates to the composite domain structure, including a twin-related one, as an elastic anomaly. At other water concentrations, such an extraordinary behavior is not observable. By assuming a sublattice having an equivalent lattice constant, a water network at 1 mol pct H₂O is simulated using a Monte Carlo (MC) method. The network develops over the medium range in the simulation box.     

Effect of Cold Rolling Reduction Rate on Secondary Recrystallized Texture in 3 Pct Si-Fe Steel

The phenomenon of secondary recrystallization in 3 pct Si-Fe electrical steel subjected to relatively high cold rolling reduction rates has been investigated. The texture of the secondary recrystallized sample that has a cold rolling reduction rate of 97.2 pct consists mainly of {110}〈112〉 component, which is quite different from the ideal Goss ({110}〈001〉) texture obtained after lower cold rolling reduction rates. The grain boundary character distribution (GBCD) analysis on the primary recrystallized sample with a cold rolling reduction rate of 97.2 pct indicates that the {110}〈112〉 component has the highest frequency of high energy (HE) boundary with a misorientation angle between 20 and 45 deg, whereas the Goss component in the sample subjected to lower cold rolling reduction rates has the highest frequency of HE boundary. These results indicate that the component with the highest frequency of HE boundary surrounding it after primary recrystallization has the privilege to outgrow other components during secondary recrystallization. However, the GBCD analysis for coincidence site lattice (CSL) boundary points out that the Goss component has the highest frequency of CSL boundaries in the primary recrystallized texture irrespective of the cold rolling reduction applied. These results suggest that the HE model can predict the orientation relationship between the primary and secondary recrystallized textures better than the CSL model.     

A study on horizontal stud welding by using steel stud for flat welding

ABSTRACT

In recent years, manufacturing sites have strongly requested for the steel stud with large diameter to be welded in the horizontal position, which is difficult because of gravity. In this study, the steel stud of 19 mm in diameter was welded horizontally to the mild steel plate by using ferrule for usage in flat position. As results two kinds of weld defect were observed; lack of fusion and blowhole. The former occurred in the welding condition of too small or too large heat input, and the latter did in the range of longer arc time. Therefore, the suitable welding condition could be found in the large current and shorter arc time. When the areal ratio of weld defect to the cross section of stud was lower than 10 percent, the welded joint had enough statical strength.     

Simplified protocol for detection of protein-ligand interactions via surface-enhanced resonance Raman scattering and surface-enhanced fluorescence

A simple and effective protocol for detections of protein-protein and protein-small molecule interactions has been developed. After interactions between proteins and their corresponding ligands, we employed colloidal silver staining for producing active substrates for surface-enhanced Raman scattering (SERS) and surface-enhanced fluorescence (SEF). Tetramethylrhodamine isothiocyanate (TRITC) and Atto610 were used for both Raman and fluorescent probes. We detected interactions between human IgG and TRITC-anti-human IgG, and those between avidin and Atto610-biotin by surface-enhanced resonance Raman scattering (SERRS) and SEF. The detection limits of the proposed SERRS-based method are comparable to those of the proposed SEF-based one, 0.9 pg/mL for anti-human IgG and 0.1 pg/mL for biotin. This protocol exploits several advantages of simplicity over other SERS and SEF-based related methods because of the protein staining-based strategy for silver nanoparticle assembling, high sensitivity from SERRS and SEF, and high stability in photostability comparing to fluorescence-based protein detections. Therefore, the proposed method for detection of protein-ligand interactions has great potential in high-sensitivity and high-throughput chip-based protein function determination.     

Analytical technique for label-free multi-protein detection based on Western blot and surface-enhanced Raman scattering

We have developed a new analytical procedure for label-free protein detection designated "Western SERS", consisting of protein electrophoresis, Western blot, colloidal silver staining, and surface-enhanced Raman scattering (SERS) detection. A novel method of silver staining for Western blot that uses a silver colloid, an excellent SERS-active substrate, is first proposed in the present study. During the process of silver staining, interactions between proteins and silver nanoparticles result in the emergence of SERS of proteins. In the present study, we use myoglobin (Mb) and bovine serum albumin (BSA) as model proteins. From different protein bands on a nitrocellulose (NC) membrane, we have observed surface-enhanced resonance Raman scattering (SERRS) spectra of Mb and SERS spectra of BSA. The proposed technique offers dual advantages of simplicity and high sensitivity. On one hand, after the colloidal silver staining, we can detect label-free multi-proteins directly on a NC membrane without digestion, extraction, and other pretreatments. On the other hand, the detection limit of the Western SERS is almost consistent with the detection limit of colloidal silver staining, and the SERRS detection limit of Mb is found to be 4 ng/band. This analytical method, which combines the technique of protein separation with SERS, may be a powerful protocol for label-free protein detection in proteomic research.     

Cryogenic optical measurements of 12-segment-bonded carbon-fiber-reinforced silicon carbide composite mirror with support mechanism

A 720 mm diameter 12-segment-bonded carbon-fiber-reinforced silicon carbide (C/SiC) composite mirror has been fabricated and tested at cryogenic temperatures. Interferometric measurements show significant cryogenic deformation of the C/SiC composite mirror, which is well reproduced by a model analysis with measured properties of the bonded segments. It is concluded that the deformation is due mostly to variation in coefficients of thermal expansion among segments. In parallel, a 4-degree-of-freedom ball-bearing support mechanism has been developed for cryogenic applications. The C/SiC composite mirror was mounted on an aluminum base plate with the support mechanism and tested again. Cryogenic deformation of the mirror attributed to thermal contraction of the aluminum base plate via the support mechanism is highly reduced by the support, confirming that the newly developed support mechanism is promising for its future application to large-aperture cooled space telescopes.