Ca掺杂钨镁酸铅陶瓷材料的制备及其介电性能

研究了Ca掺杂钨镁酸铅(PMW)陶瓷材料的合成、结构、烧结以及介电性能。结果发现：在Ca^2 摩尔分数小于15％时，能形成单相的PCMW钙铁矿相，结构由原来的斜方相向立方相转变。用二步合成法制备的样品容易致密烧结，气孔率比一步法制备的样品小。Ca的加入降低了材料的介电损耗，在频率为1MHz时，介质损耗达到了10^-4。当Ca^2 摩尔分数大于10％时，材料的Curie峰宽化显著，介电常数温度系数降低。     

黄海地质构造与油气资源

针对以往黄海油气勘探在找油思路、勘探深度、勘探领域、勘探部署和勘探技术等方面存在的问题 ,概述了南、北黄海地质构造、盆地演化、油气地质特征及成藏条件 ,并在此基础上 ,提出了对黄海油气资源远景的几点认识     

网络管理中事件关联检测机制的研究

网络事件的关联检测是网络管理需要解决的一个关键问题,本文根据分布式网络管理的特点,首次明确定义了网络事件的基本关联关系,在此基础上提出了一种基于Petri Net的事件关联检测机制,实现了基于事件内容的细粒度关联检测,并且在事件检测中充分考虑了时间因素,有效地提高了事件关联检测的准确性。     

Enhanced thermal stability of a sputtered titanium-nitride film as a diffusion barrier for capacitor-bottom electrodes

The effect of a thin RuO_x layer formed on the Ru/TiN/doped poly-Si/Si stack structure was compared with that on the RuO_x/TiN/doped poly-Si/Si stack structure over the post-deposition annealing temperature ranges of 450–600°C. The Ru/TiN/poly-Si/Si contact system exhibited linear behavior at forward bias with a small increase in the total resistance up to 600°C. The RuO_x/TiN/poly-Si/Si contact system exhibited nonlinear characteristics under forward bias at 450°C, which is attributed to no formation of a thin RuO_x layer at the RuO_x surface and porous-amorphous microstructure. In the former case, the addition of oxygen at the surface layer of the Ru film by pre-annealing leads to the formation of a thin RuO_x layer and chemically strong Ru-O bonds. This results from the retardation of oxygen diffusion caused by the discontinuity of diffusion paths. In particular, the RuO_x layer in a nonstoichiometric state is changed to the RuO₂-crystalline phase in a stoichiometric state after post-deposition annealing; this phase can act as an oxygen-capture layer. Therefore, it appears that the electrical properties of the Ru/TiN/poly-Si/Si contact system are better than those of the RuO_x/TiN/poly-Si/Si contact system.     

采用同心旋转调制盘的红外检测系统

介绍了采用同心旋转调制盘和相应的逻辑门积分计数的积累检测技术的基本原理，并给出采用同心旋转调制盘的红外检测系统的基本结构，介绍了同心旋转调制盘系统的设计方法，通过对实验结果进行分析，表明同心旋转调制盘技术在红外检测系统应用中可以大大地改善系统的性能，提高了探测概率，降低了虚警概率。同时分析了该系统存在的问题，为红外检测技术的进一步发展提供一些经验。     

硅微机械梳齿静电谐振器的建模与分析

基于参数化的计算机辅助设计（CAD）软件，对硅微机械梳齿静电谐振器进行了实体建模，以有限元分析软件为工具，进行了谐振器的模态分析，静态分析和谐响应分析，初步揭示了谐振器的静、动态特性，有助于改善设计效率和质量，展示了计算机辅助工程（CAE）技术在微机电系统（MEMS）研究中的重要作用。     

Formation and growth mechanism of TiC crystal in TiC_p/Ti composites

1　ＩＮＴＲＯＤＵＣＴＩＯＮＰａｒｔｉｃｌｅｓｒｅｉｎｆｏｒｃｅｄｔｉｔａｎｉｕｍａｌｌｏｙｍａｔｒｉｘｃｏｍｐｏｓｉｔｅｓ(ＴＭＣｐ)ｈａｖｅｗｉｄｅａｐｐｌｉｃａｔｉｏｎｆｉｅｌｄｓｆｏｒｔｈｅｉｒａｔｔｒａｃｔｉｖｅｈｉｇｈｓｐｅｃｉｆｉｃｓｔｒｅｎｇ     

Activity-dependent changes in voltage-dependent calcium currents and transmitter release

The use of capillary electrophoresis (CE) for clinically relevant assays is attractive since it often presents many advantages over contemporary methods. The small-diameter tubing that holds the separation medium has led to the development of multicapillary instruments, and simultaneous sample analysis. Furthermore, CE is compatible with a wide range of detectors, including UV-Vis, fluorescence, laser-induced fluorescence, electrochemistry, mass spectrometry, radiometric, and more recently nuclear magnetic resonance, and laser-induced circular dichroism systems. Selection of an appropriate detector can yield highly specific analyte detection with good mass sensitivity. Another attractive feature of CE is the low consumption of sample and reagents. However, it is paradoxical that this advantage also leads to severe limitation, namely poor concentration sensitivity. Often high analyte concentrations are required in order to have injection of sufficient material for detection. In this regard, a series of devices that are broadly termed 'analyte concentrators' have been developed for analyte preconcentration on-line with the CE capillary. These devices have been used primarily for non-specific analyte preconcentration using packing material of the C18 type. Alternatively, the use of very specific antibody-containing cartridges and enzyme-immobilized microreactors have been demonstrated. In the current report, we review the likely impact of the technology of capillary electrophoresis and the role of the CE analyte concentrator-microreactor on the analysis of biomolecules, present on complex matrices, in a clinical laboratory. Specific examples of the direct analysis of physiologically-derived fluids and microdialysates are presented, and a personal view of the future of CE in the clinical environment is given.     

一类非线性MIMO不确定系统的动态输出反馈镇定

考察其标称系统的相对阶大于{1,1,…,1}同时含匹配和非匹配不确定性的MIMO 非线性系统的动态输出反馈镇定问题.文中直接用Lyaunov方法构造一类输出反馈动态补 偿器,该补偿器可以实现对所论非线性不确定系统的动态输出反馈渐近镇定.     

一种多晶硅高温压力传感器

制作压力传感器时，在二氧化硅层上淀积多晶硅膜，既可利用优良的机械特性，又可保证压敏电阻与衬底间具有良好的绝缘性，由此可大大提高器件的温度特性。介绍了一种多晶硅压力传感器的原理和设计。实验结果表明，这类传感器具有灵敏度好，精度高等特点，电路工作范围为０－２５０℃，且具有良好的温度稳定性。