Study of physicochemical properties of flutamide-loaded Ocimum basilicum microspheres with ex vivo mucoadhesion and in vitro drug release

Drug which shows extensive first pass effect is difficult task that, needs to be solved by formulators in the pharmaceutical science. The low oral bioavailability (49%) of flutamide may be due to poor wettability, low aqueous solubility and extensive first pass effect. The aim of present investigation was to prepare flutamide loaded microspheres and incorporate it into suppositories for rectal delivery to avoid first pass effect and enhance residence time. Flutamide loaded mucoadhesive microspheres of Ocimum Basilicum mucilage (OBM) were prepared using spray drying and characterized by percent production yield, encapsulation efficiency, particle size, zeta potential, polydispersity index, DSC, SEM, XRPD, in vitro drug release and stability studies. Moreover, ex vivo mucoadhesion was investigated using falling liquid film technique to determine the adhesion of microspheres to sheep rectal mucosa. The microspheres had nearly spherical shape and size about 2.53?μm. The encapsulation efficiency and mucoadhesion of optimized formulation MBF10 were found to be 69.6?±?2.3% and 89.01?±?2.18%, respectively. Percent CDR of optimized flutamide loaded mucoadhesive microspheres was found to be 88.7?±?1.3 at 7?h. In conclusion, OBM microparticles based suppository could be used to deliver drug through rectal delivery.     

Texture and Microstructural Evolution in Pearlitic Steel During Triaxial Compression

This article presents the deformation behavior of high-strength pearlitic steel deformed by triaxial compression to achieve ultra-fine ferrite grain size with fragmented cementite. The consequent evolution of microstructure and texture has been studied using scanning electron microscopy, electron back-scatter diffraction, and X-ray diffraction. The synergistic effect of diffusion and deformation leads to the uniform dissolution of cementite at higher temperature. At lower temperature, significant grain refinement of ferrite phase occurs by deformation and exhibits a characteristic deformation texture. In contrast, the high-temperature deformed sample shows a weaker texture with cube component for the ferrite phase, indicating the occurrence of recrystallization. The different mechanisms responsible for the refinement of ferrite as well as the fragmentation of cementite and their interaction with each other have been analyzed. Viscoplastic self-consistent simulation was employed to understand deformation texture in the ferrite phase during triaxial compression.     

Cost analysis of hybrid adaptive routing protocol for heterogeneous wireless sensor network

This study aims to explore the impact of heterogeneity on a hybrid algorithm called Multi Adaptive Filter Algorithm by constructing series of experiments. Here, the simulations were made between ‘Total Energy Spent’ and ‘Number of Sources’ considering temporal correlation. The results were drawn from the trace information generated using ‘Monte Carlo’ simulation methods. After keen analysis, the results show that different levels of heterogeneity are best suited for correlated event detections. Moreover, based on the conclusions drawn, it can be safely inferred that n-level heterogeneity reduces the total energy spent close to 60%. Further, cost analysis recommends that adding progressive nodes preserves the cost factor in the bracket of 230–280$/Joule. The novel approach can immensely help the future solution providers to overcome the battery limitations of wireless sensor networks. This study provides insights into designing heterogeneous Wireless Sensor Networks and aims at providing the cost-benefit analysis that can be used in selecting the critical parameters of the network.     

Fault Ride-Through Capability Enhancement of VSC HVDC connected Offshore Wind Power Plants

To achieve active control of the AC voltage magnitude of wind power plant(WPP) collector network and improve the fault ride-through (FRT) capability,an FRT scheme based on feed forward DC voltage contr...     

Development of mefenamic acid–loaded polymeric microparticles using solvent evaporation and spray-drying technique

Ethyl cellulose (EC) and Eudragit RL-100 (ERL-100) were used for the preparation of sustained released microparticles of mefenamic acid (MFN) by using oil-in-oil (o/o) solvent evaporation as well as spray drying. A Plackett-Burman design was employed using Design-Expert software. The resultant microparticles were characterized for their size, surface morphology, encapsulation efficiency, and drug release. Imaging of microparticles was performed by field emission scanning electron microscopy. The drug and polymer interaction was investigated by Fourier transform infrared (FTIR) spectroscopy and X-ray powder diffractometry (XRPD). The microparticles showed encapsulation efficiency in the range of 29.44 to 89.20% by solvent evaporation and 83.73 to 96.69% by spray drying. The surface of the microparticles was smooth, round, and regular, without any erosion and cracking. The size of the microparticles was found to be in the range of 6.55 to 41.1 µm. FTIR analysis confirmed no interaction of MFN with the polymers. XRPD showed the dispersion of the drug within the microparticle formulation. These results helped in finding the optimum formulation variables for encapsulation efficiency (EE) of microparticles.     

Low‐temperature plasma processing for the enhancement of surface properties and dyeability of wool fabric

In the present investigation, wool fabric was treated with a low‐temperature air plasma. The plasma discharge power and treatment time were varied. The effect of plasma treatment on various fabric properties such as wettability, wickability, dyeability, crease recovery angle, breaking strength, and elongation at break was investigated. Surface morphology was studied using SEM micrographs. The fabric became substantially hydrophilic even with a short duration of air plasma treatment of 30 s with improvement in dye uptake and in the rate of dyeing when dyed at a lower temperature. Under these treatment conditions, aging was almost nil in a dry environment, even after 45 days, whereas some aging was observed in a humid (75% relative humidity) environment. A 20% increase in the breaking strength and 24% increase in the elongation at break were observed with reduction in wrinkle recovery angle to 133–144° from 169° for untreated fabric. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43097.     

Effect of combining ethylene/methyl acrylate/glycidyl methacrylate terpolymer and an organoclay on the toughening of poly(lactic acid)

Blends of poly(lactic acid) (PLA) and ethylene/methyl acrylate/glycidyl methacrylate terpolymer (EMA‐GMA) with and without the addition of an organoclay were prepared by melt mixing in a twin screw extruder. Mechanical, morphological, structural, and rheological properties of the systems have been investigated as function of its compositions. The impact strength (IS) of PLA increased with the addition of EMA‐GMA. Furthermore, the addition of 2.5 wt% of organoclay to the PLA/EMA‐GMA blend promoted improvements in the mechanical properties, such as IS, tensile strength, and strain‐at‐break. Further addition of organoclay, 5 wt%, led to a formation of a double percolated network, where the clay particles form bridges across EMA‐GMA droplets and glue them together, however, without coalescence. In addition, morphological and wide‐angle X‐ray scattering analyses evidenced that the clay presents a partially exfoliated structure and that remains inside the EMA‐GMA droplets, probably as a consequence of the approach used to produce the systems. POLYM. ENG. SCI., 54:1922–1930, 2014. © 2013 Society of Plastics Engineers     

Design optimization of first wall and breeder unit module size for the Indian HCCB blanket module

The Indian test blanket module(TBM) program in ITER is one of the major steps in the Indian fusion reactor program for carrying out the RD activities in the critical areas like design of tritium breeding blankets relevant to future Indian fusion devices(ITER relevant and DEMO).The Indian Lead–Lithium Cooled Ceramic Breeder(LLCB) blanket concept is one of the Indian DEMO relevant TBM,to be tested in ITER as a part of the TBM program.Helium-Cooled Ceramic Breeder(HCCB) is an alternative blanket concept that consists of lithium titanate(Li_2TiO_3) as ceramic breeder(CB) material in the form of packed pebble beds and beryllium as the neutron multiplier.Specifically,attentions are given to the optimization of first wall coolant channel design and size of breeder unit module considering coolant pressure and thermal loads for the proposed Indian HCCB blanket based on ITER relevant TBM and loading conditions.These analyses will help proceeding further in designing blankets for loads relevant to the future fusion device.