Comparison between enzyme-linked immunosorbent assay and cytotoxic cross-match procedures for detecting IgG anti-donor antibodies

BACKGROUND: Disadvantages inherent to complement-dependent cytotoxicity cross-match (CDC XM) methods are the requirements for complement and viable target cells, detection of antibodies (Abs) against non-HLA antigens, and subjective scoring. Cross-Stat (SangStat Medical Corp., Menlo Park, CA), a recently developed enzyme-linked immunosorbent assay XM procedure for the detection of IgG anti-donor HLA Abs, is theoretically devoid of these flaws. METHODS: We compared results of Cross-Stat and our standard anti-human globulin (AHG)-enhanced CDC XM procedure on 524 sera from 230 transplant candidates, which were evaluated against 51 cadaveric donors. RESULTS: There was a significant correlation between AHG-CDC IgG XM and Cross-Stat results (P<0.001). For false negative sera, repeat AHG-CDC IgG XMs were still positive after platelet absorption, indicating that the Abs present were either non-HLA Abs or anti-HLA class II. Flow cytometry testing of false positive sera usually (42/62) substantiated Cross-Stat results, indicating that the discrepancy with AHG-CDC IgG XM is caused by greater sensitivity of Cross-Stat. Relative to the AHG-CDC XM, the sensitivity of Cross-Stat was 100%, the specificity was 93%, the positive predictive value was 73%, and the negative predictive value was 100%. A technical shortcoming of the Cross-Stat assay is that the frequency of indeterminate samples in the assays was 15%. Among 49 Cross-Stat negative vs. 13 Cross-Stat positive primary cadaveric renal allograft recipients (all AHG-CDC IgG-XM negative), there was no statistical difference in overall graft survival. CONCLUSION: Given the important theoretical advantages of enzyme-linked immunosorbent assay-based XM methods over the CDC XM, however, further testing of the clinical relevance of the Cross-Stat is warranted.     

Fault detection in non-linear systems based on type-2 fuzzy logic

This paper presents a new method for fault detection (FD) based on interval type-2 fuzzy sets. The main idea is based on a confident span using interval type-2 fuzzy systems. An estimate for upper and lower bounds of output has been taken using the designing of an optimal fuzzy system through clustering. Finally the method has been tested in two non-linear systems, a two-tank with a fluid flow and pH neutralisation process, and it is compared with a well-known method named ANFIS. Furthermore, the mathematical model and the results of simulations prove the effectiveness, usefulness and applications of our new method.     

Theoretical Investigation of Ethanol Conversion to Ethylene over H–ZSM–5 and Transition Metals–Exchanged ZSM–5

Abstract  

Reaction mechanisms of ethanol conversion to ethylene over H–ZSM–5, Cu–ZSM–5, Ag–ZSM–5, and Au–ZSM–5 catalysts were investigated using density functional theory calculations. Energetics, thermodynamic quantities, rate and equilibrium constants of ethanol conversion to ethylene were obtained using the B3LYP/LanL2DZ method. The catalytic abilities of these catalysts on the reaction rates of ethanol conversion to ethylene are in order: Au–ZSM–5 > > Ag–ZSM–5 > H–ZSM–5 > > Cu–ZSM–5.     

An investigation of the amount of lead in blood of Tehran citizens in 1980–1981

A simple atomic absorption method for lead analysis is described; more than 830 samples of inhabitants on the basis to their age, sex, occupation and residential locations were collected for a period of one year (March 1980‐February 1981) and the results of analysis are given.     

A Convenient Method for Preparation of Amphiphilic Monomethoxypoly (Ethylene Glycol)–Polystyrene Diblock Copolymer by NMRP Technique

Amphiphilic block copolymers are macromolecular compounds of great importance from both fundamental scientific and many technological point of views for a large variety of applications. Amphiphilic diblock copolymer containing segments of monomethoxypoly(ethylene glycol) and polystyrene (MPEG-b-PS) was synthesised by a convenient method for preparation of macroinitiator MPEG-TEMPO for ‘living’ free radical polymerization (NMRP technique). Initially, derivative of MPEG with chlorine function has been prepared in an one-step reaction with thionyl chloride. 1-hydroxy-2,2,6,6-tetramethyl-piperidine (TEMPO-OH) obtained by reduction of 2,2,6,6-tetramethyl-piperidinyl-1-oxy (TEMPO) with sodium ascorbate was coupled with chlorinated MPEG to yield the macroinitiator MPEG terminated with a TEMPO unit (MPEG-TEMPO), which was further used to prepare the diblock copolymer MPEG-b-PS of styrene. The product was purified and identified by ¹H NMR, GPC and, FT-IR.     

Robust non-aggressive three-axis attitude control of spacecraft: dynamic sliding mode approach

Conventional sliding mode control (SMC) has been extensively applied in controlling spacecrafts because of its appealing characteristics such as robustness and a simple design procedure. Several methods such as second-order sliding modes and discontinuous controllers are applied for the SMC implementation. However, the main problems of these methods are convergence and error tracking in a finite amount of time. This paper combines an improved dynamic sliding mode controller and model predictive controller for spacecrafts to solve the chattering phenomenon in traditional sliding mode control. To this aim, this paper develops dynamic sliding mode control for spacecraft’s applications to omit the chattering issue. The proposed approach shows robust attitude tracking by a set of reaction wheels and stabilizes the spacecraft subject to disturbances and uncertainties. The proposed method improves the performance of the SMC for spacecraft by avoiding chattering. A set of simulation results are provided that show the advantages and improvements of this approach (in some sense) compared to SMC approaches.     

Combined Spectroscopic and Calorimetric Studies to Reveal Absorption Mechanisms and Conformational Changes of Protein on Nanoporous Biomaterials

In this study the effect of surface modification of mesoporous silica nanoparticles (MSNs) on its adsorption capacities and protein stability after immobilization of beta-lactoglobulin B (BLG-B) was investigated. For this purpose, non-functionalized (KIT-6) and aminopropyl-functionalized cubic Ia3d mesoporous silica ([n-PrNH₂-KIT-6]) nanoparticles were used as nanoporous supports. Aminopropyl-functionalized mesoporous nanoparticles exhibited more potential candidates for BLG-B adsorption and minimum BLG leaching than non-functionalized nanoparticles. It was observed that the amount of adsorbed BLG is dependent on the initial BLG concentration for both KIT-6 and [n-PrNH₂-KIT-6] mesoporous nanoparticles. Also larger amounts of BLG-B on KIT-6 was immobilized upon raising the temperature of the medium from 4 to 55 °C while such increase was undetectable in the case of immobilization of BLG-B on the [n-PrNH₂-KIT-6]. At temperatures above 55 °C the amounts of adsorbed BLG on both studied nanomaterials decreased significantly. By Differential scanning calorimetry or DSC analysis the heterogeneity of the protein solution and increase in Tm may indicate that immobilization of BLG-B onto the modified KIT-6 results in higher thermal stability compared to unmodified one. The obtained results provide several crucial factors in determining the mechanism(s) of protein adsorption and stability on the nanostructured solid supports and the development of engineered nano-biomaterials for controlled drug-delivery systems and biomimetic interfaces for the immobilization of living cells.     

Effect of support type and synthesis conditions on the oxygen reduction activity of RuxSey catalyst prepared by the microwave polyol method

Ru_xSe_y nanoparticles supported on different carbon substrates were synthesized by microwave heating of ethylene glycol solutions of Ru(III) chloride and sodium selenite at different pH and Ru/Se mole ratios. The resulting catalysts were used for the electrochemical oxygen reduction reaction (ORR) in acidic solution. The electrochemical activity was highest for the supported catalyst synthesized at pH 8. Increasing the Se concentration of the catalyst up to 15 mol% increased the catalytic activity for the ORR; at this Se concentration, the activity of the catalyst was considerably higher than that observed for pure Ru catalyst synthesized at exactly the same conditions. The influence of the type of carbon support on the activity of the electrocatalyst was also investigated. Among the different supports, including carbon black (Vulcan XC-72R) (C1), and nanoporous carbons synthesized from resorcinol- (C2) and phloroglucinol-formaldehyde (C3) resins, the Ru_xSe_y catalyst supported on C3 exhibited highest activity for ORR.     

[Hmim][HSO4], a Green and Recyclable Acidic Ionic Liqiud Medium for the One‐Pot Nitration of TADB to HNIW

An efficient and mild procedure for the one‐pot preparation of CL‐20 from TADB in the presence of the Brønsted acidic ionic liquid 1‐methylimidazolium hydrogen sulfate [Hmim][HSO₄] as catalyst was developed. The ionic liquid was stable during the reaction process and could also be reused several times with steady activity. In order to optimize the process parameters to obtain higher yield and purity, a study was carried out with variation of the ionic liquids and some parameters like temperature, mole ratio of [Hmim][HSO₄] and nitric acid. This procedure may be a practical alternative to the existing procedures to meet the nees of academics as well as industry.     

Supercritical methanol for fatty acid methyl ester production: A review

To overcome the limitations of conventional biodiesel processing technology, researchers have investigated alternative production methods, one of these being supercritical methanol processing. It has been reported that this process can handle feed contaminants, has simple purification operations and achieves high conversion in short reaction times. Despite these promising results many factors have been shown to affect the level of conversion at the high temperatures and pressures required. The purpose of this review is to clarify the inter-relation between these parameters and evaluate the merit of supercritical methanol processing as an alternative to the conventional homogeneous alkaline catalysed method.