Processing and thermal properties of composites based on recycled PET,sisal fibers,and renewable plasticizers

This investigation focuses on the preparation of bio‐based composites from recycled poly (ethylene terephthalate) (PET) and sisal fibers (3 cm, 15 wt %), via thermopressing process. Plasticizers derived from renewable raw materials are used, namely, glycerol, tributyl citrate (TBC) and castor oil (CO), to decrease the melting point of the recycled PET (T_m ∼ 265°C), which is sufficiently high to initiate the thermal decomposition of the lignocellulosic fiber. All used materials are characterized by thermogravimetric analysis and differential scanning calorimetry, and the composites are also characterized via dynamic mechanical thermal analysis. The storage modulus (30°C) and the tan δ peak values of CT [PET/sisal/TBC] indicate that TBC also acts as a compatibilizing agent at the interface fiber/PET, as well as a plasticizer. To compare different processing methods, rheometry/thermopressing and compression molding are used to prepare the recycled PET/sisal/glycerol/CO composites. These two different methods of processing show no significant influence on the thermal properties of these composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40386.     

Effect of gas properties on the onset of flooding in small diameter inclined tubes

This work concerns the effect of gas phase properties on incipient flooding in counter-current gas–liquid two-phase flow in small diameter inclined tubes (D < 10 mm). The aim is to propose generalized correlations that can be used to predict incipient flooding in small diameter tubes. Experiments were performed in a 7 mm glass tube and at two inclination angles, i.e. 30 and 60° from the horizontal, using water as liquid phase and atmospheric air, He and CO₂ as gas phase. Previously proposed correlations for flooding prediction ( Pantzali et al., 2008) were suitably adjusted to incorporate the effect of gas phase properties. It has been proved that the flooding curves calculated using the proposed correlations are in good agreement with both the results of the present study and relevant literature data.     

Short-Term Immune Responses of Gilthead Seabream (Sparus aurata) Juveniles against Photobacterium damselae subsp. piscicida

Photobacteriosis is a septicaemic bacterial disease affecting several marine species around the globe, resulting in significant economic losses. Although many studies have been performed related to the pathogen virulence and resistance factors, information regarding the host defence mechanisms activated once an infection takes place is still scarce. The present study was designed to understand innate immune responses of farmed juvenile gilthead seabream (Sparus aurata) after Photobacterium damselae subsp. piscicida (Phdp) infection. Therefore, two groups of seabream juveniles were intraperitoneally injected with 100 µL of PBS (placebo) or 100 µL of exponentially growing Phdp (1 × 10⁶ CFU/mL; infected). The blood, plasma, liver, and head kidney of six fish from each treatment were sampled immediately before infection and 3, 6, 9, 24 and 48 h after infection for the broad screening of fish immune and oxidative stress responses. Infected animals presented marked anaemia, neutrophilia and monocytosis, conditions that are correlated with an increased expression of genes related to inflammation and phagocytic activity. Similar studies with different fish species and bacteria can be useful for the definition of health biomarkers that might help fish farmers to prevent the occurrence of such diseases.     

化学合成制药综合废水的处理

本文介绍了化学合成制药废水的处理工艺、原理和运行效果,该工艺处理后的污水完全达到国家规定的污水排放标准。     

精炼工艺对椰子油品质的影响

研究了精炼工艺对椰子油品质的影响。分析了毛椰油、碱炼油、脱色油、脱臭油的理化指标、脂肪酸、甘油酯组成和脂肪伴随物(甾醇、生育酚、多酚)的变化情况。结果表明:精炼工艺使椰子油的酸值、过氧化值显著降低,脂肪酸和甘油酯组成无显著变化;总甾醇、总生育酚和多酚含量显著降低,损失率分别为63.77%、68.03%、71.20%。综上表明,精炼能够显著影响油脂品质,需注重油脂适度加工技术的应用。     

Mixture design applied for the development of films based on starch,polyvinyl alcohol,and glycerol

Starch and polyvinyl alcohol (PVA) are biodegradable materials with potentiality to replace the conventional polymers in some applications. The aim of this work was to produce biodegradable films of PVA, cassava starch, and glycerol by thermoplastic extrusion using a mixture design to evaluate the effects of each component in the blend properties. Six formulations were prepared using a twin‐screw extruder coupled with a calender. All the materials were visually homogeneous and presented good processability. Mechanical properties were dependent on both the relative humidity conditioning and the formulation; higher relative humidities detracted the mechanical properties, which was associated to plasticizer effect of the water. Furthermore, the mechanical properties were better when higher concentrations of PVA were used, resulting in films with lower opacity, lower water vapor permeability, and higher thermal stability, according to TGA. Biodegradable materials based on starch, PVA, and glycerol have adequate mechanical and processing properties for commercial production. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42697.     

Comparative Analysis of Ozone and Ultrasound Effect on the Elimination of Giardia spp. Cysts from Wastewater

Giardia spp. is a flagellate protozoan that presents two evolution forms, cysts and trophozoites. Cysts are resistant to chlorine, the most employed disinfectant agent in the treatment of water. For this reason, new techniques for the disinfection of waters that contain this parasite are necessary. This work evaluated the efficiency of the disinfection by ozone and ultrasound individually and simultaneously upon wastewater. The data obtained showed that after application, ozone, ultrasound, and combined techniques induced a significant elimination of Giardia spp. cysts. Furthermore, this effect was more accentuated when the two techniques were applied simultaneously.     

General method for plasmid construction using homologous recombination

We describe a general method for plasmid assembly that uses yeast and extends beyond yeast-specific research applications. This technology exploits the homologous recombination, double-stranded break repair pathway in Saccharomyces cerevisiae to join DNA fragments. Synthetic, double-stranded "recombination linkers" were used to "subclone" a DNA fragment into a plasmid with > 80% efficiency. Quantitative data on the influence of DNA concentration and overlap length on the efficiency of recombination are presented. Using a simple procedure, plasmids were shuttled from yeast into E. coli for subsequent screening and large-scale plasmid preps. This simple method for plasmid construction has several advantages. (i) It bypasses the need for extensive PCR amplification and for purification, modification and/or ligation techniques routinely used for plasmid constructions. (ii) The method does not rely on available restriction sites, thus fragment and vector DNA can be joined within any DNA sequence. This enables the use of multifunctional cloning vectors for protein expression in mammalian cells, other yeast species, E. coli and other expression systems as discussed. (iii) Finally, the technology exploits yeast strains, plasmids and microbial techniques that are inexpensive and readily available.     

Rapid detection of epidemic strains of methicillin-resistant Staphylococcus aureus

Fifty methicillin-resistant Staphylococcus aureus (MRSA) initial isolates obtained from patients hospitalized in the orthopedic clinic of the Frankfurt University Hospital and 150 methicillin-sensitive Staphylococcus aureus (MSSA) isolates were investigated in this study to determine whether the Slidex Staph-Kit is capable of differentiating between MRSA and MSSA owing to its unique performance characteristics. The Slidex Staph-Kit is a combined latex hemagglutination test designed to detect clumping factor, protein A, and a specific surface immunogen for S. aureus. Clumping factor-positive strains cause erythrocytes sensitized with fibrinogen to hemagglutinate, thereby resulting in visible red clumps. S. aureus strains deficient in clumping factor agglutinate latex particles sensitized with specific antibodies against surface proteins of S. aureus, thereby resulting in visible white clumps. Our results demonstrate that white clumping has a 99% specificity as well as a 98% positive predictive value for MRSA. Clumping factor-negative MRSA, which have been reported to occur in several countries, are epidemic in the Frankfurt area and account for 80% of all MRSA initial isolates in the orthopedic clinic of the Frankfurt University Hospital. Genotyping of all MRSA isolates by macrorestriction analysis of chromosomal DNA revealed that 83% of clumping factor-negative MRSA are closely related to the "southern-German" epidemic strain. This is the first study demonstrating the Slidex Staph-Kit's capability for identifying epidemic clumping factor-negative S. aureus strains as methicillin resistant even prior to antimicrobial susceptibility testing.