基于数字图像分析的薄板成形应变场测量方法

对薄板成形应变场传统的测量方法进行了研究。指出了其不足和误差的来源，提出了数字图像分析法测量薄板成形中的应变场，对测量原理，新的测量方法对传统方法的改进，以及如何降低误差进行了介绍，指出数字图像分析法的前景，提出了改进意见。     

Least mean p-power error criterion for adaptive FIR filter

An adaptive FIR filter based on the least mean p-power error (MPE) criterion is investigated. First, some useful properties of MPE function are studied. Three main results are as follows: 1) MPE function is a convex function of filter coefficients; so it has no local minima. 2) When input process and desired process are both Gaussian processes, then MPE function has the same optimum solution as the conventional Wiener solution for any p. 3) When input process and desired process are non-Gaussian processes, then MPE function may have better optimum solution than Wiener solution. Next, a least mean p-power (LMP) error adaptive algorithm is derived and some application examples are presented. Consequently, when the signal is corrupted by an impulsive noise, the adaptive algorithm with p=1 is preferred. Furthermore, when the signal is corrupted by noise or interference, the adaptive algorithm with proper choice of p may be preferred     

Promising alloys for intermediate-temperature solid oxide fuel cell interconnect application

The formation of a low Cr-volatility and electrically conductive oxide outer layer atop an inner chromia layer via thermal oxidation is highly desirable for preventing chromium evaporation from solid oxide fuel cell (SOFC) metallic interconnects at the SOFC operation temperatures. In this paper, a number of ferritic Fe–22Cr alloys with different levels of Mn and Ti as well as a Ni-based alloy Haynes 242 were cyclically oxidized in air at 800 °C for twenty 100-h cycles. No oxide scale spallation was observed during thermal cycling for any of these alloys. A mixed Mn₂O₃/TiO₂ surface layer and/or a (Mn, Cr)₃O₄ spinel outer layer atop a Cr₂O₃ inner layer was formed for the Fe–22Cr series alloys, while an NiO outer layer with a Cr₂O₃ inner layer was developed for Haynes 242 after cyclic oxidation. For the Fe–22Cr series alloys, the effects of Mn and Ti contents as well as alloy purity on the oxidation resistance and scale area specific resistance were evaluated. The performance of the ferritic alloys was compared with that of Haynes 242. The mismatch in thermal expansion coefficient between the different layers in the oxide scale was identified as a potential concern for these otherwise promising alloys.     

红外目标模拟器校准系统的研制与应用

采用标准辐射和红外目标模拟器的辐射交替折转进入红外光谱辐射计的方法，研制的红外目标模拟器校准系统可以对红外目标模拟器进行直接校准．该系统由标准准直辐射源，光束偏转装置和红外光谱辐射计组成．标准准直辐射源由工作温度为50℃～1050℃的标准黑体和口径300mm的离轴抛物面作主镜的准直光管组成．光束偏转装置由口径465mm的反射镜和定位精度5″的转台组成．红外光谱辐射计采用圆形渐变滤光片CVF对入射的辐射分光，3个光谱工作区间为1μm～3μm，3μm～5μm和8μm～14μm。3个区间的测试数据显示了最小可校准的光谱辐照度低于10^-11／cm^2，系统的相对标准不确定度为2％．     

多模复合制导数据融合器性能评估系统方案设计

从构建多模复合制导数据融合器性能评估系统的需求出发，详细介绍了多模复合制导数据融合器性能评估系统的构建方案，并从软硬件两个方面介绍了构建这样一个系统所需要注意的问题和解决办法．     

Generalized eigenvectors and fractionalization of offset DFTs and DCTs

The offset discrete Fourier transform (DFT) is a discrete transform with kernel exp[-j2/spl pi/(m-a)(n-b)/N]. It is more generalized and flexible than the original DFT and has very close relations with the discrete cosine transform (DCT) of type 4 (DCT-IV), DCT-VIII, discrete sine transform (DST)-IV, DST-VIII, and discrete Hartley transform (DHT)-IV. In this paper, we derive the eigenvectors/eigenvalues of the offset DFT, especially for the case where a+b is an integer. By convolution theorem, we can derive the close form eigenvector sets of the offset DFT when a+b is an integer. We also show the general form of the eigenvectors in this case. Then, we use the eigenvectors/eigenvalues of the offset DFT to derive the eigenvectors/eigenvalues of the DCT-IV, DCT-VIII, DST-IV, DST-VIII, and DHT-IV. After the eigenvectors/eigenvalues are derived, we can use the eigenvectors-decomposition method to derive the fractional operations of the offset DFT, DCT-IV, DCT-VIII, DST-IV, DST-VIII, and DHT-IV. These fractional operations are more flexible than the original ones and can be used for filter design, data compression, encryption, and watermarking, etc.     

����ѡ������Ļ�ɫ���߷���

本文根据灰色系统理论中的灰色决策原理,提出了一种合理选择钻机的新方法,并通过了实例验证。结果表明,这种方法切实可行。     

职业道德建设的调查与思考

近年来各行各业加强职业道德建设,取得了一定成绩,涌现了一大批敬业爱岗、服务社会的岗位明星,但也存在着这样或那样的认识误区或现实局限,如形式主义、短期行为和领导观念异位等,这极大地阻碍了职业道德建设的深入推进。职业道德建设就其特征而言,它具有长期性、时代性和阶级性、相对稳定性以及创新性等属性,对此需要有一个理智而清晰的认识。应从营造良好的社会氛围、制定切实可行的道德准则、进行规范化的教育引导和发挥先进人物的示范作用等几方面入手,把职业道德建设推向深入。