Twenty-month outcome in ventilator-dependent, very low birth weight infants born during the early years of dexamethasone therapy

We sought to examine the effect of the introduction of dexamethasone therapy on health, growth, and neurodevelopmental outcome in very low birth weight (VLBW) infants at 20 months of age. We compared outcomes in all 86 VLBW infants (mean birth weight 871 gm, mean gestational age 26.4 weeks) who were ventilator dependent on day 21 of life during the 2 years preceding October 1988 (period 1), when dexamethasone therapy became accepted clinical practice in our unit, with outcomes in all 124 infants (mean birth weight 891 gm, mean gestational age 26.9 weeks) with similar ventilator status during the subsequent 2 years (period 2). In addition, we compared outcomes in infants who received dexamethasone during period 2 with those in a concurrent cohort of less ill infants who were not given dexamethasone. There were no significant differences between periods 1 and 2 in mortality rates after 21 days (17% vs 21%), need for home oxygen (23% vs 25%), oxygen dependence at 20 months of corrected age (11% vs 10%), rate of neurosensory impairment (24% vs 25%), and mean Bayley Mental scores (81.5 vs 77.2) or Psychomotor Development Index (81.6 vs 71.1). Infants who received dexamethasone during period 2 had significantly more severe lung disease and poorer respiratory, growth, and developmental outcomes. We conclude that VLBW infants with ventilator-dependent chronic lung disease have very poor outcomes, even when treated with dexamethasone. More information is needed from prospective, randomized trials before dexamethasone can be accepted as routine therapy for chronic lung disease.     

Immunochemical properties of a 60 kDa cell surface-associated heat shock-protein (Hsp60) from Helicobacter pylori

Western blot analysis (immunoblotting) of cell surface-associated proteins from Helicobacter pylori confirmed our previous findings that binding of human IgG is a common property (among H. pylori strains). Purification of the IgG-binding proteins (IGBP) was achieved by two purification steps, affinity chromatography on IgG-Sepharose and nickel chelate affinity chromatography. SDS-PAGE and immunoblotting analysis revealed a 60 kDa protein with affinity for peroxidase labeled human IgG. Solid phase binding assays showed that IgG binds to an immobilized protein (IGBP). The 60 kDa IGBP binds human IgG1, IgG3 and IgM. Binding could be inhibited by the kappa chain of the human IgG, but not with its Fc fragment, nor with IgA or IgM. In addition, rabbit polyclonal antibodies raised against the 60 kDa IGBP blocked IgG binding. Monoclonal antibodies, specific to the Hsp60 heat shock protein of H. pylori recognized the 60 kDa IGBP as revealed by immunoblotting analysis, both in crude preparations and in the purified fractions.     

Synthesis and Characterization of Amorphous Nano‐Alumina Powders with High Surface Area for Biodiesel Production

Nano‐alumina powders containing yttrium oxide were synthesized via the sol‐gel method using aluminum chloride hexahydrate as catalyst precursor. Fourier transform infrared analysis showed the presence of Al‐O and Al‐O‐Al bands in the powder structure and X‐ray diffraction spectra proved that the alumina was in the amorphous phase. The amorphous nano‐alumina powders were shown to be mesoporous with a high surface area, and both spherical and slit‐shaped particles were found in the calcined powder. A high percentage of conversion of oil to biodiesel was obtained in the transesterification reaction and the synthesized nano‐alumina powders could be easily regenerated for further use. The amorphous nano‐alumina powder can thus be recommended for use as active catalyst in the transesterification reaction for biodiesel production on the industrial scale.     

An assessment of the ability of computational fluid dynamic models to predict reactive gas–solid flows in a fluidized bed

Fine grid, two dimensional simulations of reactive gas–solid flows occurring in a fluidized bed reactor were carried out using the Eulerian multi-fluid kinetic theory of granular flow (KTGF) approach in the commercial flow solver, ANSYS FLUENT 12.1. The fuel reactor of a pilot scale Chemical Looping Combustion rig, operated in the bubbling fluidization regime at the Vienna University of Technology, was simulated. Grid dependence studies were carried out as well as sensitivity studies to the fuel inlet condition and the inclusion of gas phase turbulence. Simulations could not accurately reproduce the experimental trend for the case when highly reactive nickel oxide was used as the oxygen carrier material, but in general satisfactory quantitative agreement was observed. The failure to correctly capture the experimental trend was primarily attributed to the fine length-scales at the feed gas inlets not being adequately resolved even at the finest grid investigated. The trend quickly worsened when coarser grids were used, indicating that the generality of the model is lost when grid dependence effects are present. A number of possible dimensional effects were also discussed. Subsequently, the model was used to successfully capture another experimental trend obtained with a much less reactive ilmenite oxygen carrier material. The model captured this trend correctly because the reaction was now limited by the reaction rate and not by species transfer to the large scale gas-emulsion interfaces. Results were therefore not as sensitive to the correct hydrodynamic modelling of the interface, especially near the gas inlets, and the model retained its generality over a wide range of operating conditions.     

Innovative Internally Circulating Reactor Concept for Chemical Looping‐Based CO2 Capture Processes: Hydrodynamic Investigation

An experimental hydrodynamic investigation has been carried out for a novel internally circulating chemical looping (ICCL) reactor concept proposed to reduce the technical complexities encountered in conventional chemical looping combustion (CLC) and reforming (CLR) technologies. The concept consists of a single reactor with internal physical separations dividing it into two sections, i.e., the fuel and air sections. The trade‐off for this reduction in process complexity is increased gas leakage between the two reactor sections, so a pseudo‐2D cold‐flow experimental unit was designed. The ICCL concept remains highly efficient in terms of CO₂ separation while ensuring significant process simplifications. The solids circulation rate also proved easy to control by adjusting the fluidization velocity ratio and the bed loading. In the light of the excellent hydrodynamic performance, the ICCL concept appears to be well‐suited for further development as a CLC/CLR reactor model.     

Physicochemical stability of calcium alginate beads immobilizing TiO2 nanoparticles for removal of cationic dye under UV irradiation

Recently, there have been considerable interests to immobilize photocatalyst in alginate beads for removing pollutants from water sources. However, the feasibility of using alginate beads in industry largely depends on its long‐term stability during operation. This study investigated the physicochemical stability of alginate/titanium dioxide beads (Alg/TiO₂) when exposed to UV irradiation in aqueous environment. The degradation of Alg/TiO₂ beads was evident because the diameter and mass of the beads was reduced by 12% and 40%, respectively, after 120 h of irradiation. A substantial amount of TiO₂ was leached into the external medium. Consequently, the removal efficiency of model cationic dye was found to reduce after every process cycle. Morphological analysis showed the formation of cavities on the surface of the Alg/TiO₂ beads. Interestingly, the blank alginate beads degraded more rapidly than the Alg/TiO₂ beads, confirming the UV‐shielding effect of TiO₂. Nevertheless, this study reveals the need to improve the UV stability of alginate‐based beads before they can be considered for practical application. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45002.     

Synthesis of Molybdenum Oxide Nanohybrids as Efficient Catalysts in Oxidation of Alcohols

Novel layered materials based on molybdenum oxide have been synthesized using three amino-carboxylate ligands; terephetalic acid, p-aminobezoic acid and diaminobenzene. On the basis of X-ray diffraction, scanning electron microscopy, thermogravimetry, and infrared results, the insertion of organic ligands into the interlayer space of molybdenum oxide has been proposed. Moreover, the influence of organic guests on the oxide structure and also their catalytic performance are discussed. Furthermore, fabrication of the nanostructured molybdenum oxide is achieved by calcinations of these hybrid materials at 600 °C. Somewhat oriented nanoplatelets are viewed with different catalytic activity.     

Preparation of the γ-Al2O3/PANI nanocomposite via enzymatic polymerization

Peroxidase-catalyzed template-guided polymerization of aniline in the presence of γ- alumina nanosheet (NS) particles have been carried out in aqueous media and γ-Al₂O₃/PANI nanocomposite was obtained. The polymerization of aniline occurred in aqueous solution in the presence of SPS (sulfonated polystyrene) as a template and SDS (sodium dodecyl sulfate) as a surfactant. Both obtained nanocomposites were comparable by SEM images. It was demonstrated that the γ-Al₂O₃ NS/PANI-SPS nanocomposite has higher conductivity and the γ-Al₂O₃ NS/PANI-SDS nanocomposite has higher void areas. The higher conductivity of γ-Al₂O₃ NS/PANI-SPS nanocomposite is attributed to the higher coated areas of γ-Al₂O₃ NS during polymerization in comparison with γ-Al₂O₃ NS/PANI-SDS which are not coated efficiently as the former. The FT-IR studies showed that the γ-Al₂O₃ NS/PANI nanocomposite was formed by interaction of the polyaniline (PANI) and γ-Al₂O₃ NS. FTIR also showed that the amount of PANI in γ-Al₂O₃ NS/PANI-SPS is more than in γ-Al₂O₃ NS/PANI-SDS. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Synthesis and identification of organosoluble polyamides bearing a triaryl imidazole pendent: Thermal,photophysical, chemiluminescent,and electrochemical characterization with a modified carbon nanotube electrode

A novel monomer containing a triaryl imidazole pendent group was successfully synthesized by nucleophilic substitution of bisphenol A with 2-(2-chloro-5-nitrophenyl)-4,5-diphenyl-1H-imidazole (I). A series of new polyamides (PAs) with inherent viscosities of 0.95–1.2 dL/g was prepared by direct polycondensation of the diamine with various dicarboxylic acids. These PAs were readily soluble in many organic solvents and gave tough and flexible films by solution casting. These PAs exhibited T_gs between 189 °C and 252 °C, and 10% weight loss temperatures in excess of 400 °C with up to 68% char yield at 600 °C in air. All of the PAs emitted a greenish-yellow light in dilute THF solution, with photoluminescence (PL) quantum yields in the range of 10–25%. The chemiluminescent activity and electrochemical oxidation of the PAs were also investigated.