Surface Treatment of Inorganic CsPbI3 Nanocrystals with Guanidinium Iodide for Efficient Perovskite Light-Emitting Diodes with High Brightness

The remarkable evolution of metal halide perovskites in the past dec-ade makes them promise for next-generation optoelectronic material.In particular,nanocrysta...     

Effect of rubber hardness on the properties of fiber reinforced plastic composites made by the newly proposed rubber pressure molding technique

The effect of rubber hardness on the properties of fiber‐reinforced plastic (FRP) composites is investigated in order to know the optimum composition of rubber mold used in rubber pressure molding (RPM) technique. A matching die set was used in RPM method, where the die was made of hard metal like steel and the punch from the flexible rubber like material, natural rubber. The use of flexible rubber punch generates and applies hydrostatic pressure on the surface of FRP composites. The hardness of rubber mold was controlled by incorporating carbon black as a filler material in the matrix of natural rubber and varied from 0 to 75 phr (per hundred rubber) in steps of 15 phr. Burn test, tension test, interlaminar shear test and interlaminar fracture toughness tests were conducted on the FRP composites to measure the void content, presence of delamination, tensile strength, inter laminar shear strength and inter laminar fracture toughness. The results are compared with the FRP composites made by conventional technique to evaluate the performance of RPM technique. It is observed that the laminates produced by RPM technique with different filler content in natural rubber mold show significant improvement in mechanical properties except interlaminar shear strength. POLYM. COMPOS., 28:618–630, 2007. © 2007 Society of Plastics Engineers     

Non-equilibrium solidification of undercooled droplets during atomization process

Thermal history of droplets associated with gas atomization of melt has been investigated. A mathematical model, based on classical theory of heterogeneous nucleation and volume separation of nucleants among droplets size distribution, is described to predict undercooling of droplets. Newtonian heat flow condition coupled with velocity dependent heat transfer coefficient is used to obtain cooling rate before and after nucleation of droplets. The results indicate that temperature profile of droplets in the spray during recalescence, segregated and eutectic solidification regimes is dependent on their size and related undercooling. The interface temperature during solidification of undercooled droplets rapidly approaches the liquidus temperature of the alloy with a subsequent decrease in solid-liquid interface velocity. A comparison in cooling rates of atomized powder particles estimated from secondary dendrite arm spacing measurements are observed to be closer to those predicted from the model during segregated solidification regime of large size droplets.     

Antifungal,antiaflatoxin and antioxidant potential of chemically characterized Boswellia carterii Birdw essential oil and its in vivo practical applicability in preservation of Piper nigrum L. fruits

The study explores the chemical profile, antimicrobial and antioxidant activity of Boswellia carterii essential oil (EO). The EO significantly inhibited growth and aflatoxin production by the food borne toxigenic strain of Aspergillus flavus at 1.75 μl/ml and 1.25 μl/ml respectively. It exhibited broad fungitoxic spectrum against 12 food borne moulds and also showed strong antioxidant activity, IC₅₀ value and % inhibition of linoleic acid peroxidation being 0.64 μl/ml and 51.68% respectively. The antifungal action of EO was observed in terms of reduction in ergosterol content of plasma membrane of A. flavus. As fumigant in food system in storage containers, the EO provided 65.38% protection against fungal deterioration of Piper nigrum. GC–MS results revealed 31 components of EO. The chemically characterized B. carterii EO may thus be recommended as plant based preservative in view of its antifungal, antiaflatoxigenic, antioxidant activity and efficacy in food system.     

Evolution of properties of parts during MIM and sintering of recycled oxide particles

Metal injection moulding (MIM) is an established process for high volume production of complex shaped metallic parts using commercially available feedstocks. The characteristics of parts after moulding, debinding, and sintering cannot be simply predictable from raw materials because the properties get altered with the process parameters and the corresponding levels of porosity during processing steps. In this study, physical properties, microstructure, and mechanical properties of the MIM parts have been characterised to understand the evolution of strength during various steps in MIM processing. Feedstocks with different binder loading show a considerable difference in physical as well as mechanical characteristics. During sintering of parts which have solid loading of grinding sludge, simultaneous in situ reduction and densification takes place, whereas only densification occurs in carbonyl iron parts. It is, therefore, possible to make complex shaped parts of different levels of porosity from downgraded shop floor metallic waste.     

Physico‐mechanical properties of nano‐polystyrene‐decorated graphene oxide–epoxy composites

Nano‐polystyrene (nPS)‐decorated graphene oxide (GO) hybrid nanostructures were successfully synthesized using stepwise microemulsion polymerization, and characterized using Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD), field‐emission scanning electron microscopy and transmission electron microscopy. XRD and FTIR spectra revealed the existence of a strong interaction between nPS and GO, which implied that the polymer chains were successfully grafted onto the surface of the GO. The nPS‐decorated GO hybrid nanostructures were compounded with epoxy using a hand lay‐up technique, and the effect of the nPS‐decorated GO on the mechanical, thermal and surface morphological properties of the epoxy matrix was investigated using a universal tensile machine, Izod impact tester, thermogravimetric analysis and contact angle measurements with a goniometer. It was observed that in the epoxy matrix, GO improved the compatibility. © 2017 Society of Chemical Industry     

Architectural considerations for next-generation file systems

Integration – supporting multiple application classes with heterogeneous performance requirements – is an emerging trend in networks, file systems, and operating systems. We evaluate two architectural alternatives – partitioned and integrated – for designing next-generation file systems. Whereas a partitioned server employs a separate file system for each application class, an integrated file server multiplexes its resources among all application classes; we evaluate the performance of the two architectures with respect to sharing of disk bandwidth among the application classes. We show that although the problem of sharing disk bandwidth in integrated file systems is conceptually similar to that of sharing network link bandwidth in integrated services networks, the arguments that demonstrate the superiority of integrated services networks over separate networks are not applicable to file systems. Furthermore, we show that: an integrated server outperforms the partitioned server in a large operating region and has slightly worse performance in the remaining region; the capacity of an integrated server is larger than that of the partitioned server; and an integrated server outperforms the partitioned server by a factor of up to 6 in the presence of bursty workloads.     

A hybrid multi-criteria decision approach to analyze key factors affecting sustainability in supply chain networks of manufacturing organizations

Clean Technologies and Environmental Policy - Companies are under increasing pressure to inculcate sustainability in their supply chain networks. However, the companies face significant amount of...     

Experimental comparison of open sun drying and solar drying based on evacuated tube collector

In this article, an experimental comparison between open sun and solar drying is done. The thermal performance of evacuated tube based solar dryer is investigated with drying characteristics of Phyllanthus Emblica (Anvla), Aloe Vera, Aegle Marmelos (Bel) and leaves of Azadirachta Indica (Neem), Aegle Marmelos (Bel) and Psidium Guajava (Guava). In this setup, an evacuated tube collector, shell and tube heat exchanger and drying chamber are used. It was found that the maximum temperature difference between hot air and ambient air is 35.4°C and maximum efficiency of the setup is calculated as 55%. The average drying rate of Phyllanthus Emblica (Anvla), Aloe Vera and Aegle Marmelos (Bel) is measured as 0.46?g/min, 0.44?g/min, and 0.39?g/min respectively which are higher than that of Open Sun Drying. The leaves of Azadirachta Indica (Neem), Aegle Marmelos (Bel) and Psidium Guajava (Guava) also get dried with faster rates of 0.18?g/min, 0.17?g/min, and 0.14?g/min respectively.     

Prediction of weld zone shape with effect of tool pin profile in friction stir welding process

Journal of Mechanical Science and Technology - This article investigates the effect of tool pin profile on weld zone shape using computational fluid dynamics techniques in friction stir welding...