采用信息融合技术的IR／MMW复合导引头的目标跟踪

从误差测量环节入手，基于IR／MMW双模结构，采用信息融合处理技术提高其估计跟踪精度，最终达到降低制导误差，提高武器性能的目的，仿真结果验证了该方法的有效性。     

超声变幅杆解析法设计的可靠性研究

本文提出了用有限元法验证变幅杆解析法设计的可靠性，对三种类型的变幅杆先作解析法设计；然后利用有限元分析软件ANSYS进行模态分析，确定了变幅杆的固有频率，计算了固有频率与工作频率之间的相对误差，以此来评价解析法设计的可靠性；并分析了影响解析法设计可靠性的两个基本因素。     

循环荷载作用下饱和黏性土的弹塑性双面模型

基于作者新近提出的一种混合塑性硬化准则和临界状态土力学理论建立了一个三维形式表述的适于饱和黏性土的弹塑性双面模型,此硬化准则是著名的M asing方法在三维应力空间中的推广。该模型的二维形式已采用饱和黏性土样室内动态三轴不排水剪切试验的结果进行了验证并已在另文发表。本文所建的三维弹塑性动本构模型与一个半经验的孔隙水压力增长模式相结合,通过有限元程序ABAQUS*对一个循环荷载作用下的条形基础下部地基土层内的位移、应力分布和超孔隙水压力随时间的变化进行了分析,计算结果表明模型预测的地基土的力学响应是符合实际的。     

Olefins from conventional and heavy feedstocks: Energy use in steam cracking and alternative processes

Steam cracking for the production of light olefins, such as ethylene and propylene, is the single most energy-consuming process in the chemical industry. This paper reviews conventional steam cracking and innovative olefin technologies in terms of energy efficiency. It is found that the pyrolysis section of a naphtha steam cracker alone consumes approximately 65% of the total process energy and approximately 75% of the total exergy loss. A family portrait of olefin technologies by feedstocks is drawn to search for alternatives. An overview of state-of-the-art naphtha cracking technologies shows that approximately 20% savings on the current average process energy use are possible. Advanced naphtha cracking technologies in the pyrolysis section, such as advanced coil and furnace materials, could together lead to up to approximately 20% savings on the process energy use by state-of-the-art technologies. Improvements in the compression and separation sections could together lead to up to approximately 15% savings. Alternative processes, i.e. catalytic olefin technologies, can save up to approximately 20%.     

Microwave heating synthesis of HgS and PbS nanocrystals in ethanol solvent

A novel route was developed to prepare PbS and HgS nanocrystals in ethanol solvent in the presence of sodium hydroxide by microwave heating method. PbS and HgS nanocrystals were obtained with an average size of approximately 10 and 6 nm, respectively. In the reaction, mercury acetate and lead acetate were used as mercury and lead source; sulfur powder was employed as chalcogenide source. The products were characterized by X-ray powder analysis (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV–Vis absorption spectroscopy. The probable mechanism was presented.     

A Unified View on Clustering Binary Data

Clustering is the problem of identifying the distribution of patterns and intrinsic correlations in large data sets by partitioning the data points into similarity classes. This paper studies the problem of clustering binary data. Binary data have been occupying a special place in the domain of data analysis. A unified view of binary data clustering is presented by examining the connections among various clustering criteria. Experimental studies are conducted to empirically verify the relationships.     

广州地铁集中冷站的自动控制

本文介绍广州地铁二号线集中冷站的空调制冷自动控制系统的设计，对其控制原理与节能优化进行分析。     

电子商务中信息传输与共享

电子商务中信息传输与共享技术是电子商务的核心技术 ,电子商务是以Internet为基础的新兴产业 ,保护信息的安全无疑是十分重要的 ,人们越来越多地使用计算机网络来传送对安全敏感的信息 ,所以在信息传输域共享中 ,认证业务、保密业务、数据完整性业务、不可否认业务是当前电子商务急需解决的关键技术 ,本文对这方面做了一些探讨并提出自己的看法     

The Content Driven Mobile Internet

The development of future mobile networks will be driven, in large part, by content and web based services. In this paper, we examine several performance, scalability and architectural challenges faced by future mobile web applications and how advanced mobile content delivery techniques can address these challenges. We review existing content delivery using a taxonomy that consists of three categories: network scaling, end system acceleration, and content and protocol optimization. While wireline content delivery focuses on network and server scalability, mobile content delivery will likely benefit most from optimizing radio link usage. We also present our ongoing work in this area, which extends the functionality of edge caching to the terminal, uses user interest correlation information to maintain low terminal power consumption and adds a new dimension to radio resource management. This revised version was published online in August 2006 with corrections to the Cover Date.     

Laser-assisted sealing and testing for ceramic packaging of MEMS devices

In this work, a CO/sub 2/ laser-assisted silicon lid sealing process, utilizing Au80/Sn20 solder, for encapsulating gas breakdown test micro-electro-mechanical structures (MEMS) in a ceramic quad flatpack (CQFP) was studied. Wire bonded MEMS dies were sealed into CQFPs under various gas media, such as air, nitrogen, helium and vacuum. The gas breakdown test results showed a significantly higher breakdown voltage for vacuum packaged parts compared to those packaged in other various gas environments. Hermeticity testing according to MIL-STD-883E showed that the leak rate of the package was below 10/sup -8/ atm cc/s. The bonding was uniform and the bonding strength is believed to be comparable to the tensile strength of Au80/Sn20 solder.