金融危机下的LED产业发展及结构分析——以江西为例

目前,金融危机已对全球实体经济产生了巨大的冲击,2008年世界经济已明显放缓,下行风险逐步加大,前景更加不确定。中国经济虽一支独秀,但毫无疑问也会受到外部因素冲击从而影响国内经济发展,以投资和外向型贸易为特点的中国经济急需新技术和高科技领域经济增长来改变现有传统经济增长模式,而LED行业就是这样的代表性行业。本论文立足于当前世界金融危机整体发展局势,重点分析了当前金融危机对LED行业的影响,并对江西LED行业发展的整体环境及发展趋势进行了探讨和分析。     

基于LMS算法改进Cupo相位抖动补偿方法

为了增加FIR-ALE(Finite Impulse Response-Adaptive Linear Enhancer)相位噪声补偿系统的补偿能力,本文基于LMS算法对Cupo的FIR-ALE系统进行改进,并对8PSK调制方式下的信号进行了Matlab仿真,通过对信号功率谱、误比特率以及星座图的分析,对比了两种方法.仿真结果表明,改进后的系统对于幅度为5°、频率为120 Hz的相位抖动,能够将抖动衰减25 dB左右;对于幅度为15°、频率为25 Hz的相位抖动,改进后的LMS系统能将抖动衰减35 dB左右.而且,随着相位抖动幅度的增大,改进的LMS方法的补偿能力同Cupo的FIR-ALE方法比较,性能逐渐提高.     

钢桥桥面铺装脱层破坏的分析

脱层是大跨径钢桥桥面铺装的一种主要破坏形式,而且出现频繁.文中针对各种破坏机理,提出了在桥面板上增加抗滑设施、提高防水粘结层强度,同时,重视防腐层施工质量等措施,这些措施在一定程度上能解决脱层问题.     

改进粒子群算法的动态空间调度方法

针对船体分段生产调度的多目标性和动态性,提出了一种改进粒子群算法的动态空间调度方法,确定船体分段在工作平台上的加工顺序和空间布局位置.算法以加工完成时间最短和空间利用率最高为目标,采用自适应惯性权重策略保证算法的收敛性,并引入遗传算法中的选择算子和变异算子增强算法的收敛速度和多样性,利用启发式定位策略确定分段的位置.最后,以船厂实际生产数据进行仿真验证.仿真结果表明,所提方法可以大大降低以手工方式制定调度计划的复杂度,并能有效地提高空间利用率达到70%,说明该方法是解决动态空间调度问题的一种有效方案.     

Nonsmooth spatial frictional contact dynamics of multibody systems

Multibody System Dynamics - Computational prediction of 3D crutch-assisted walking patterns is a challenging problem that could be applied to study different biomechanical aspects of crutch walking...     

Oxidation behavior and mechanism of aluminum oxynitride (AlON) at elevated temperatures

The oxidation behavior and mechanism of aluminum oxynitride (AlON) powder exposed to air at elevated temperatures between 800°C and 1300°C was investigated by X-ray diffractometry (XRD), scanning electron microscope (SEM), electron spin resonance (ESR), nuclear magnetic resonance (NMR), and simultaneous thermogravimetry, differential thermal analysis, and mass spectrometry techniques (TG-DTA-MS). The weight of AlON gradually increases to a maximum value at 1150°C and then decreases with further heating. Meanwhile, AlON powder undergoes chemical changes, as evidenced by lattice expansion, and turns eventually into alumina. ESR spectra reveal the occurrence of lone pair electrons in the oxidized products and the intensity of corresponding resonance signal increases before disappearing with the increase in temperature. Combined with the results of NMR and TG-DTA-MS, the measured data suggest that Al-N in [AlO₃N] tetrahedron and [AlO₅N] octahedron are gradually oxidized into Al-O-N group with lone pair electrons, which causes continuous weight gain and lattice expansion. Further oxidation at higher temperatures results in alumina and N₂.     

Engineering all-aromatic polyamide surface from hydrophilic to superhydrophobic and the accelerated strategy

Being a new kind of nanomaterials, aromatic polyamide nanofibers (ANF) have been much highlighted in recent studies. We here demonstrate an isopropyl alcohol (IPA) accelerated chemical cleavage on poly (p-phenylene terephthalamide) chopped fibers, which provides an efficient preparation method of ANF. The comprehensive study on the processes accelerated by different alcohols revealed that the preparation time of ANF in the mixed medium of dimethyl sulfoxide (DMSO)-alcohol (20:1 in volume) was shorten to 45 min and 75 min for methanol (ethanol) and isopropanol, respectively. However, the nanofibers prepared in DMSO-IPA exhibited the minimum in axial and radial dimensions, providing the finest and most uniform diameter of 16 nm. The corresponding ANF films through vacuum assisted filtration also showed the highest tensile strength of 150 MPa, in comparison with those of the ANF films prepared using other alcohols, which were about 110 MPa. Furthermore, ANF/silicon hybrid films were prepared by the ionic ring-opening reaction followed by the alkoxysilane condensation and nanoparticle fabrication. By changing the organo functional groups in the alkoxysilane, the surface of the films were adjustable in a wide contact angle range from 56° (hydrophilic) to 150° (superhydrophobic), suggesting the amendable interfacial properties potential applicable to composite fabrication with most of the resin matrix.     

纳米金刚石的应用

纳米金刚石不仅具有金刚石所固有优异特性，而且还具有纳米材料所拥有的奇异性能。正是这些综合技术特性，使得它在传统的和新的技术领域中得到应用，并初见成效，本文从超精抛光、润滑、复合镀、磁性录音系统和医疗等方面的应用做了扼要的叙述，指出，纳米金刚石颗粒具有球形和准球形的特点，使得摩擦表面形成滚珠轴承效应，而表现出良好的润滑性，从而避免于摩现象的发生，而对一些主要因接触疲劳或高温磨损而失效的工件，纳米金刚石金属的复合涂层，则具有明显的优越性。     

Large magnetic-field-induced strains in rare earth polycrystalline Ni-Mn-Ga

The magnetic-field-induced strains (MFIS) of polycrystalline Ni50Mn29Ga21 alloys containing Tb were studied. A large MFIS of-1.10% was obtained under compressive prestress conditions. The addition of Tb can fine the crystal grains, enhance the bending strength obviously, and make MFIS increase further, indicating that a moderate amount of Tb does not hinder twin boundary motion and it conversely makes the material more practical.     

硬质合金磨削温度的实验研究

采用半人工和人工热电偶法，对硬质合金YG6和YT30平面磨削的磨削温度进行了实验研究。并对磨削参数与磨削温度的关系，进行了理论分析及实验验证。结果表明：磨削深度和工作台速度增加，磨削温度升高，但工作台速度的改变，对磨削温度的影响较小．