可伸缩铰支管接头简介

本文指出了埋入地下的刚性管接头连接的管道易出现的问题及为解决这些问题而发明的可伸缩铰支管接头的特点及结构。     

Intelligent healthcare service based on context inference using smart device

In the field of “U-Healthcare Service”, many studies have been actively conducted to develop “smart device”-based healthcare applications that enable healthcare providers and patients to be better served through interoperations among various kinds of sensors and wireless network interfaces. In particular, contemporary intelligent healthcare services not only recognize users’ context information through smart devices, computers, and so forth, but also acquire information from heterogeneous sensors to achieve context-aware inference services. Among such information, the weather information is tightly related to diseases such as asthma and allergies. Therefore, there is a high demand for research to utilize the weather information for healthcare services. In this paper, we propose a context inference-based intelligent healthcare service that exploits both the weather conditions information and the diverse healthcare ontologies available on the Internet. The proposed service aims at modeling a context ontology in users’ healthcare service environment and defining the inference rules, thereby accomplishing a satisfactory real-time healthcare service.     

不同形貌ZnO气敏材料的制备及影响气敏性因素分析

以锌盐和碱为原料,采用水热和溶剂热法合成了三种形貌的氧化锌粉体,利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)和X射线光电子能谱仪(XPS)对产物的结构和形貌及表面化学状态进行了表征,并将粉体制备成厚膜型气敏元件,测试了其对几种还原性气体的气敏性能,结果表明:在工作温度为395℃时,三种形貌氧化锌对相同浓度的同种测试气体的灵敏度大小顺序为:菜花状氧化锌﹥棒状氧化锌﹥六棱柱状氧化锌。并对影响氧化锌材料气敏性的各种因素进行了分析。     

软锰矿浸出制备软磁铁氧体用碳酸锰的研究

研究了以低品位软锰矿石为原料,配入植物粉料,用硫酸直接浸出软锰矿制备软磁铁氧体用碳酸锰的新工艺方法。探讨了软锰矿直接酸浸、含锰浸出液净化除杂、锰净化液碳化结晶等工艺条件。所制备的产品经X 射线衍射、粒度分析及化学成分分析等测试,结果表明,产品质量达到GB10503 89Ⅰ型品的要求。在优惠工艺条件下,锰的回收率达90%以上。     

闭世界框架下灰色模糊多属性决策方法

针对D-S 证据理论在融合高度冲突的证据时可能导致与直观结果相悖的问题, 已有的基于修改数据模型的方法更多地考虑如何提高冲突证据结果的聚焦程度, 而没有考虑冲突成因以及如何通过冲突原因判断来削减证据之间的冲突. 对此, 提出一种闭世界框架下的灰色模糊多属性决策方法. 根据一般的灰色关联分析方法的基本思路, 将灰色关联度与欧氏距离有机结合, 构造出一种平均相似度对方案进行评价, 进而得到方案的排序结果. 最后, 通过实例分析验证了所提出方法的可行性和有效性.     

溶剂萃取法回收与处理含DMAc废水的研究

本文研究了用低沸点萃取剂处理和回收含二甲基乙酰胺（DMAc)废水的可行性及工艺条件，经研究表明，在常温20－35℃时，用氯仿萃取二甲基乙酰胺，当溶剂与水相体积比为2：1时，经六级逆流萃取，可将废水中20％（w/w)的二甲基乙酰胺含量降至300mg/L以下。废水的pH值对萃取效率有明显的影响，当废水的pH值较大，即偏碱性对萃取有利。     

Polyimide foams with ultralow dielectric constants

To explore ultralow dielectric constant polyimide, the crosslinked polyimide foams (PIFs) were prepared from 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA), 4,4′‐oxydianiline (ODA), and 2,4,6‐triaminopyrimidine (TAP) via a poly(ester–amine salt) (PEAS) process. FTIR measurements indicated that TAP did not yield a negative effect on imidization of PEAS precursors. SEM measurement revealed the homogeneous cell structure. Through using TAP as a crosslinking monomer, the mechanical properties of PIFs could be improved in comparison with uncrosslinked BTDA/ODA based PIF. The crosslinked PIFs still exhibited excellent thermal stability with 5% weight loss temperatures higher than 520°C. In the field with frequency higher than 100 Hz, the dielectric constants of the obtained PIFs ranged from 1.77 to 2.4, and the dielectric losses were smaller than 3 × 10^?2 at 25–150°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1734–1740, 2006     

Three Dimensional Modeling of Shaft with Process Structures on CATIA

Three dimensional models of shaft were completed on CATIA Part Design module with the Chinese national standard （GB） process structures such as chamfers, threads and tool withdrawal grooves, center holes, flat/woodruff/gib head taper keyseats, grinding undercuts, straight-sidedsplines, circlip slots and collars. The modeling steps are arranged in dialog menu interface by VB 6.0, the shaft creator, that permits users input geometric feature based parameters explicitly, and the standardized processdata are reorganized in Excel files that can be invoked correspondingly in the modeling procedure. It is aimed that this process may supply a simple way for shaft rapid modeling and comprehensive discipline for engineering students in their professional design activities.     

LTE小区搜索中一种新的SSS检测算法

主要研究了SSS检测, 提出一种新的SSS检测算法。该算法首先利用滑动平均窗修正接收的PSS处估计出的信道频率响应, 并用修正后的信道频率响应对接收的SSS序列进行信道补偿; 其次, 算法对信道补偿后的序列进行实数提取操作, 消除虚部数据干扰; 最后算法联合两个连续的SSS接收序列进行检测进一步提高检测性能。TDD和FFD两种模式下的仿真结果表明：该算法可以较好地实现SSS检测且比现有几种SSS检测算法在低信噪比（SNR<0 dB）条件下具有更好的检测性能。     

Oxygen enrichment from air through multilayer thin low‐density polyethylene films

Several multilayer thin low‐density polyethylene (LDPE) films were fabricated by blown thin film having a thickness of 7 μm and an area of 130 cm². They were characterized for their oxygen‐enrichment performance from air by a constant pressure–variable volume method in a round permeate cell with an effective area of 73.9 cm². The relationship between oxygen‐enrichment properties, including oxygen‐enriched air (OEA) flux, oxygen concentration, permeability coefficients of OEA, oxygen, nitrogen, as well as separation factor through the multilayer LDPE films, and operating parameters, including transfilm pressure difference, retentate/permeate flux ratio, temperature, as well as layer number, are all discussed in detail. It is found that all of the preceding oxygen‐enrichment parameters increase continuously with an increase of transfilm pressure difference from 0.1 to 0.65 MPa, especially for the trilayer and tetralayer LDPE films. The oxygen concentration and separation factor appear to rapidly increase within the retentate/permeate flux ratio below 200, and then become unchangeable beyond that, whereas the OEA flux and the permeability coefficients of OEA, oxygen, and nitrogen seem to remain nearly constant within the whole retentate/permeate flux ratio investigated, especially for the monolayer and bilayer LDPE films. The selectivity becomes inferior, whereas the permeability becomes superior, as the operating temperature increases from 23 to 31°C. The highest oxygen concentration was found to be 44.8% for monolayer LDPE film in a single step with air containing oxygen of 20.9% as a feed gas and operating pressure of 0.5 MPa at a retentate/permeate flux ratio of 340 and 23°C. The results demonstrate a possibility to prepare an oxygen‐enriching membrane directly from air, based on the easily obtained thin LDPE films. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3013–3021, 2002; DOI 10.1002/app.2331