在CORBA中实现异步调用

介绍了CORBA中的四种异步激发方式：多线程方式、单向异步激发方式、延迟同步激发方式以及异步方法调用方式,并讨论了各种异步激发方式的优缺点。     

用多媒体软件模拟匀加速直线运动

用多媒体软件Ｄｉｒｅｃｔｏｒ６．０来模拟物理教学中的匀加速直线运动。     

呼兰河流域2012年洪水特性分析

对2012年呼兰河流域的暴雨、洪水特性进行了分析,说明了变化规律,认识该流域水文特性,并对其成因及特性进行了归纳,为流域综合治理等提供科学的决策依据,其形成洪水主要是7月25—26日和7月28—29日的两次范围广、强度大的降雨过程。8月4日凌晨呼兰河秦家站出现洪峰,洪峰流量达到1 090 m3/s为2005年迁站以来第一位洪水。     

Synthesis and characterization of layered perovskite-type organic-inorganic hybrids (R-NH3)2(CH3NH3)Pb2I7

Layered organic-inorganic hybrids containing bilayer perovsikte (R-NH3)2(CH3NH3)Pb2I7 (where R=C12H25,C6H5C2H4) were synthesized by reactions in solution. The influences of the solvents and the reactant ratio on the structures of the products were investigated. The structures and the properties of the hybrids were characterized using X-ray diffraction (XRD) and ultraviolet and visible (UV) adsorption spectra. For comparing with the bilayer perovskite hybrids in structure and band gap magnitude, the hybrids containing monolayer perovskite (R-NH3)2PbI4 were also synthesized and characterized. The results demonstrate that the thickness of inorganic layer has obvious effect on the tunneling magnitude of the band gap but the organic part can be micro actuator of band gap.     

Hybrid Well-balanced WENO Schemes with Different Indicators for Shallow Water Equations

In (J. Comput. Phys. 229: 8105–8129, 2010), Li and Qiu investigated the hybrid weighted essentially non-oscillatory (WENO) schemes with different indicators for Euler equations of gas dynamics. In this continuation paper, we extend the method to solve the one- and two-dimensional shallow water equations with source term due to the non-flat bottom topography, with a goal of obtaining the same advantages of the schemes for the Euler equations, such as the saving computational cost, essentially non-oscillatory property for general solution with discontinuities, and the sharp shock transition. Extensive simulations in one- and two-dimensions are provided to illustrate the behavior of this procedure.     

Blockwise conjugate gradient methods for image reconstruction in volumetric CT

Cone beam computed tomography (CBCT) enables volumetric image reconstruction from 2D projection data and plays an important role in image guided radiation therapy (IGRT). Filtered back projection is still the most frequently used algorithm in applications. The algorithm discretizes the scanning process (forward projection) into a system of linear equations, which must then be solved to recover images from measured projection data. The conjugate gradients (CG) algorithm and its variants can be used to solve (possibly regularized) linear systems of equations Ax=b and linear least squares problems minx∥b-Ax∥(2), especially when the matrix A is very large and sparse. Their applications can be found in a general CT context, but in tomography problems (e.g. CBCT reconstruction) they have not widely been used. Hence, CBCT reconstruction using the CG-type algorithm LSQR was implemented and studied in this paper. In CBCT reconstruction, the main computational challenge is that the matrix A usually is very large, and storing it in full requires an amount of memory well beyond the reach of commodity computers. Because of these memory capacity constraints, only a small fraction of the weighting matrix A is typically used, leading to a poor reconstruction. In this paper, to overcome this difficulty, the matrix A is partitioned and stored blockwise, and blockwise matrix-vector multiplications are implemented within LSQR. This implementation allows us to use the full weighting matrix A for CBCT reconstruction without further enhancing computer standards. Tikhonov regularization can also be implemented in this fashion, and can produce significant improvement in the reconstructed images.     

用流延法制备优质陶瓷基片的研究

本文概括了流延成型工艺的现状，介绍了有机基流延成型工艺中溶剂及添加剂的作用和选择原则，同时介绍了几种新的流延成型工艺。     

Phase formation and modification of corrosion property of nitrogen implanted Ti-Al-V alloy

In the present investigation, polished samples were implanted with nitrogen ion at an energy of 60 keV and implantation doses were 1×10¹⁶, 5×10¹⁶, 1×10¹⁷ and 6×10¹⁷ ions/cm². Glancing incidence X-ray diffraction was employed on the implanted specimens to understand the phases formed with increasing dose. The valence states of nitrogen, titanium and carbon on the sample surfaces were analyzed by X-ray photoemission spectroscopy. The corrosion resistance was examined by the electrochemical methods in a solution with pH=10 at room temperature in order to determine the optimum dose that can give good corrosion resistance in a simulated nuclear reactor condition. Scanning electron microscopy was used to observe the topographies of nitrogen-implanted Ti-Al-Zr after potentiodynamic measurement. It was found that implanted nitrogen dissolved in titanium matrix with increasing dose and the resultant nitrides such as TiN and Ti₂N precipitated. Implantation of nitrogen ions into the surface of Ti-Al-V alloy improves its corrosion resistance, and the increase of the corrosion resistance depends on the nitrogen dose employed; the maximum improvement of the corrosion resistance was observed at a dose of 1×10¹⁷ N⁺/cm².