折射法对溶液中分子络合物的研究(一)

本文将近期发展起来的研究溶液中分子络合物的折射法用于氯苯-苯酚体系。以侵入式折射仪测定了该体系在惰性溶剂四氯化碳中的络合常数,并对R.A.Singh等的论文中关于△n~2的求算问题进行了商榷。     

基于函数插值的柯氏质量流量计信号处理方法

对基于离散傅里叶变换(DFT)信号处理方式的柯氏质量流量计来说,影响其精度的关键问题是如何实现信号的整周期采样。提出了一种全新的方法,用采样率固定不变的采样数据,通过软件实时地确定信号的频率并且实现信号整周期重新采样。实验结果表明该方法在求取相位差时具有极高的精度。     

A novel de-rusting method with molten salt precleaning and laser cleaning for the recycling of steel parts

Clean Technologies and Environmental Policy - Steel parts are a kind of high recovery value product for which de-rusting is the primary step in the recycling process. Laser cleaning is a popular...     

锚杆锚索联合支护在大断面巷道中的应用

分析了沈阳煤业集团西马煤矿北二区的地质条件,根据生产实际对北二区回风上山掘进工作面的支护选择锚杆锚索联合支护方式,确保了大断面巷道支护的安全。     

激光法合成纳米金刚石的高分辨电镜研究

在常温常压下,采用脉冲激光作用循环的石墨悬浮液,收集并烘干得到样品B,另一部分用高氯酸进行酸煮提纯提到样品A.对样品A、B分别进行高分辨电子显微镜（HRTEM）和显微拉曼光谱（Micro-Raman）分析.结果表明,部分石墨经激光作用后转变成了具有多重孪晶结构特征的、尺寸为5 nm的金刚石颗粒,同时还得到了非晶碳.高分辨电子显微镜照片证明,石墨转变成纳米金刚石的机理为快速成核长大过程.     

A novel ethanol gas sensor based on ZnO-microwire

One-dimensional (1D) ZnO microwires were successfully synthesized by chemical vapor deposition and their structural and morphological properties were analyzed by X-ray diffraction and scanning electron microscopy, demonstrating that the microwires were single crystalline with perfect hexagonal structure and smooth surface. Using these 1D microstructures, we fabricated a novel ZnO-based ethanol gas sensor. Operating at room temperature, the sensor was found to have good sensing characteristics. The reliability and stability of the sensor could be improved by connecting multiple 1-wire devices (1-WD) in parallel into a multi-wires device. In interior natural lighting environment and under 3 V bias, the response and recovery time of the 1-WD to 200 ppm ethanol gas were <10 s and about 300 s, respectively, and the minimum and maximum detection limit were about 2 and 200 ppm, respectively. A sensing model was proposed for discussing the performance of the sensor. The simplicity in fabrication, low power consumption and low cost make the sensor suitable for practical application in many fields, especially in identifying driving under the influence and chemical industry monitoring.     

Comparison of the effects of Mg–6Zn and titanium on intestinal tract in vivo

To evaluate the ability of Mg–6Zn to replace titanium nails in the reconstruction of the intestinal tract in general surgery, we compared the Mg–6Zn and titanium implants with respect to their effects on rat’s intestinal tract by biochemical, radiological, pathological and immunohistochemical methods. The results indicated that Mg–6Zn implants started to degrade at the third week and disintegrate at the fourth week. No bubbles appeared, which may be associated with intestinal absorption of the Mg–6Zn implants. Pathological analyses (containing liver, kidney and cecum tissues) and biochemical measurements, including serum magnesium, creatinine, blood urea nitrogen, glutamic–pyruvic–transaminase and glutamic–oxaloacetic–transaminase proved that degradation of Mg–6Zn did not harm the important organs, which is an improvement over titanium implants. Immunohistochemical results showed that Mg–6Zn could enhance the expression of transforming growth factor-β₁. Mg–6Zn reduced the expression of tumor necrosis factor at different stages. In general, our study demonstrates that the Mg–6Zn alloy had good biocompatibility in vivo and performed better than titanium at promoting healing and reducing inflammation. It may be a promising candidate for stapler pins in intestinal reconstruction.